ADALM2000 is a 9-in-1 portable test and measurement instrument launched by ADI.
Open sourced by Bilibili up, DCDC-LDO secondary step-down power supply, tc1047 for cold-end compensation, built-in curve fitting calibration function, and supports 65W gallium nitride charger.
The cost of the board should be less than 50RMB, and it provides a lot of information, which is very suitable for novices to use as a development board to learn Linux.
There are three boards in total, USB, FPGA and Sensor board. The FPGA board features a Lattice Crosslink NX LIFCL-40 and the required power regulator, and the USB board features a CYUSB3014 USB 3.0 SuperSpeed controller.
ScopeFun is an open source all-in-one instrumentation platform. It includes oscilloscopes, arbitrary waveform generators, spectrum analyzers, logic analyzers and digital pattern generators.
Design secure POS with PCI and EMVCo, NFC, chip card and magnetic stripe readers using NXP technology.
Little Bee is an affordable, high-performance current probe and magnetic field probe that allows you to debug and analyze electronic devices more efficiently.
Portenta X8 is a powerful industrial-grade SOM with a pre-installed Linux operating system onboard and can run device-independent software thanks to its modular container architecture. Securely perform OS/application OTA updates with onboard Wi-Fi/Bluetooth® Low Energy connectivity. It is basically two industrial products combined into one, with a power of no less than 9 cores. Utilize the Arduino environment to perform real-time tasks, while Linux handles high-performance processing. Portenta X8 features NXP® i.MX 8M Mini Cortex®-A53 quad-core up to 1.8GHz per core + 1x Cortex®-M4 up to 400MHz, and STMicroelectronics STM32H747 dual-core Cortex®-M7 up to 480Mhz +M4 32-bit Arm® MCU, up to 240MHz.
With the in-depth research of ultrasonic levitation technology by domestic and foreign scholars, ultrasonic levitation devices have developed from expensive horns and other equipment to structures composed of general-purpose commercial ultrasonic transducers. Combined with 3D model printing technology, any scientific researcher and Electronics enthusiasts can use these components to make ultrasonic levitation devices to facilitate related acoustic research. This technology was published in AIP Publishing by Asier Marzo et al. Based on its model, this design changes the main control MCU, uses the timer inside the MCU to generate accurate PWM waves, and improves the software so that the ultrasonic device can move the suspension stably during the axial suspension movement. Small objects in multiple nodes.
The author opens up the schematic diagram and supporting Raspberry Pi code. The simulation bandwidth is already 30MHz, and the frequency response is very close to the theoretical simulation, with a difference of about 0.02dB between 1kHz and 30MHz.
Uses infrared light sensing to determine changes in blood oxygen levels in the brain in real time. Use the device in less than ten minutes to learn how to directly change blood flow to your brain. Neurons do not store energy, so regional brain activity is closely related to changes in blood oxygenation, where healthy blood flow patterns are essential for high function and growth of the brain.
The quality of mobile phone screens is very high and the price is low. It is almost impossible to find mini displays made of mobile phone screens on the market, so this project is to solve this demand.
Somu is a small FIDO2 security key that you can use with your Google, Twitter, and GitHub accounts for two-factor authentication, or with your Microsoft account for passwordless login.
Flipper Zero is a portable multi-tool designed for developers and geeks with a toy-like body. It enjoys exploring digital content such as radio protocols, access control systems, hardware, and more. It's completely open source and customizable, so you can extend it in any way you like.
This is a new design for a universal gear indicator that can be installed on any motorcycle as an aftermarket accessory. Its main advantage is that its operation depends entirely on the movement of the gear lever, rather than being connected to speedometer and tachometer sensors (found in expensive commercial equipment), which are rarely found in older motorcycles. It consists of a main circuit including a 7-segment LED indicator, two Hall sensors attached to the motorcycle frame, and a small magnet placed on the gear lever.
The MCU-based solution for Face Recognition is a turnkey hardware and single source software solution for adding machine vision to products using the i.MX RT line of crossover processors.
SwarmDrive based on ESP32 has rich teaching documents, professionals and students can use it to easily learn various commutation algorithms and related knowledge of BLDC motors.
This is what smart home enthusiasts want to control their entire lights, thermostat, or any other smart device from their couch without having to activate a wall switch.
USB-Cereal is a powerful, fully open source development tool that simplifies testing, development, debugging and manufacturing of devices using USB-C. Using the extended capabilities of USB-C, this unique hardware saves time and effort by simplifying debugging and factory log capture, as well as firmware update procedures.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
