LED display driver reference design with serial interface

This reference design uses a low-cost MSP430 and two DRV8860 eight-channel low-side drivers to drive eight seven-segment displays with brightness control. The display module benefits from the DRV8860's wide power supply range, high current, PWM brightness control, serial daisy-chain connectivity, and output scalability to hundreds of LEDs. It is a complete solution, equipped with six demonstration display modes via the onboard MCU program, with integrated protection against short circuit, under voltage and over temperature.

Schematic PCB

Multiphase Energy Measurement Reference Design Using Isolated Shunt Sensors

The TIDA-00601 design uses isolated shunt sensors to implement a Class 0.5% three-phase energy metering system. Isolation is achieved by using an isolated Delta-Sigma modulator with a capacitively isolated output circuit. The energy metering SoC takes different bit streams from the isolated modulator and uses its onboard digital filter to generate ADC sample readings. The energy metering SoC is also used to sense voltages, calculate metering parameter values, drive the board LCD, and communicate with the PC GUI via the board's isolated RS-232 circuitry.

Schematic PCB

Complete IO-Link sensor-transmitter reference design with 24-bit RTD front end

This reference design is a resistance thermometer (RTD) front end with an IO-Link compatible sensor transmitter. This design uses the well-proven IO-LINK PHY and stack, and a 6mm wide form factor (compatible with standard M12 connectors) to quickly start IO-Link device development. TI also provides test results demonstrating the high accuracy of this RTD design (measurement error of 0.17°C over the -200°C to 850°C temperature range). The design also complies with IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 and IEC 60255-5 standards, ensuring reduced time to market for real-world industrial applications. This design comes with a software package that provides a complete solution to speed your sensor transmitter time to market.

Schematic PCB

Single-phase sub-electricity meter for smart buildings

The Energy Monitor is designed as a complete set of tools for measuring and displaying the energy consumption of individual loads within a smart building, such as major appliances. This tool allows engineers to quickly evaluate TI's solutions for low-cost energy metering applications. The reference design comes with hardware and software design files to speed engineers' development process. The energy monitor design can also be expanded to integrate with TI's ZigBee and Wifi reference designs to add wireless communication capabilities to the end product.

Schematic PCB

High-Current SEPIC Reference Design for Automotive Lighting and ADAS Systems

This reference design is ideal for running IR LEDs (up to 3A) in high current pulse mode in automotive ADAS systems. The design supports continuous and pulsed operation even during load dump and hot start events. Other features include analog dimming and CISPR-25 Class 3 EMI filtering.

Schematic PCB

5V 1A, low EMI, 94% efficiency DC/DC module reference design using single-layer TO-247 package

TI reference design TIDA-00948 demonstrates a 15mmx20mm, 94% efficient low electromagnetic interference (EMI) DC/DC module using the TPS54202, replacing low dropout regulators (LDOs) in most appliance applications. High efficiency eliminates the need for a heat sink, resulting in a smaller, lower cost solution. Higher current capacity enables the addition of more functionality (WiFi, sensors, etc.). High efficiency and low current consumption help achieve stringent energy efficiency ratings.

Schematic PCB

Dual-stage triple-output buck converter

The PMP7800.1 reference design is a dropout design using the LMR14203 for computer and peripheral applications. It generates a non-isolated 3.3 volt output (0.07 amps) from a 21.6 to 26.4 volt DC input.

Schematic PCB

Micro Dual Mode Wireless Receiver

This board is a SFF (Small Form Factor) complete miniature wireless receiver solution. The output is 5Vdc (1A), which can be used to power or charge battery-powered devices using any industry-standard WPC or PMA compliant transmitter.

Schematic PCB

TI releases space-grade 3-7V input, 24A/0.95V output reference design

This is a 24-A DC/DC space-grade power supply hardware reference design.
With the advancement of FPGA and ASIC technology, the core voltage requirements are getting lower and lower, but the current requirements are getting larger and larger. The latest space-grade FPGAs and ASICs require low voltage and high current to meet their core power consumption.

Schematic PCB

3.3V 1A, low EMI, 92% efficiency DC/DC module reference design in single-layer TO-247 package

TI reference design TIDA-00949 demonstrates a 15mmx20mm, 92% efficient low electromagnetic interference (EMI) DC/DC module using the TPS54202, replacing low dropout regulators (LDOs) in most appliance applications. High efficiency eliminates the need for a heat sink, resulting in a smaller, lower cost solution. Higher current capacity enables the addition of more functionality (WiFi, sensors, etc.). High efficiency and low current consumption help achieve stringent energy efficiency ratings.

Schematic PCB

Battery-Powered Wireless Sensor Monitoring Reference Design

This design pairs the ultra-low-power MSP430 MCU with a sub-1GHz RF transceiver to achieve a battery-powered wireless sensor monitoring solution. This design demonstrates access points and wireless nodes that can share sensor data wirelessly using the network protocol "SimpliciTI". A PC-side GUI is also provided to visually display wireless data transmitted/received between various nodes and access points.

Schematic PCB

TI launches wireless metering bus M-BUS reference design

This reference design describes how to use TI's wireless M-Bus stack with the CC1310 and CC1350 wireless MCUs and integrate them into smart meter or data collector products. The software stack is compatible with the Open Metering System (OMS) v3.0.1 specification. EN13757-1 to EN13757-7 are European meter reading standards, including wired and wireless metering buses (M-Bus); these are very popular in ultra-low power metering and sub-metering applications. The design provides ready-to-use binary images for any wireless M-Bus S, T or C mode at 868 MHz, with unidirectional (instrumentation) or bidirectional configuration (instrumentation and datalogger). Multiple precompiled binary images are provided covering metering applications including but not limited to heat cost allocators (HCA), gas, water and heat meters, or electronic meters with external host MCUs.

Schematic PCB