For motor control systems, ADI can provide complete solutions covering all important devices in the signal chain. Related products include analog-to-digital/digital-to-analog converters, amplifiers, embedded processors, iCoupler® digital isolators and power management devices. These high-performance devices and increased system integration help achieve newer topology designs and bring value to customers' differentiated system designs.
For small and medium power motor applications, the EPSH-MPC development platform provides current sampling of the isolated analog-to-digital converter AD7403. The external current loop is converted into a corresponding shunt voltage through a shunt resistor and input to the voltage test terminal of the AD7403. The AD7403 outputs according to the clock signal given by CM408F. ADC bit stream, CM408F enables the built-in SINC filter on the input bit stream to calculate the corresponding 16-bit ADC value, and stores the data into the corresponding ring queue through DMA. The host computer software can use the UART-USB port Or obtain the display of data samples through the RS485 port, you can intuitively see the acquisition effect of AD7403, and the collected data can be stored in an excel table to facilitate corresponding analysis of the data.
A reference design that demonstrates charging and discharging of two batteries/battery packs with a programmable charge voltage up to 40V. It also demonstrates how to design a battery back-up, also known as an uninteruptable power supply, where the charged batteries are used to power the system if the external voltage supply is lost.
Microchip’s 750W AC-DC Reference Design demonstrates a semi-bridgeless PFC topology followed by a peak current controlled zero-voltage switching full-bridge (ZVS FB) converter with digital slope compensation to achieve very high conversion efficiencies. This power supply can be firmware updated (including the compensator algorithm) with zero down time to the system it is powering while the
The Sonoma (MAXREFDES14#) subsystem reference design performs accurate AC energy measurement while utilizing a unique, low-cost galvanic isolation architecture. The Sonoma meets the high-accuracy and low-cost needs of energy-measurement applications. This small form-factor design is available for purchase. Hardware, firmware design files, and lab measurements provide complete system information for rapid prototyping and development.
The MAXREFDES70# reference design is a high-precision, low-cost, low-power consumption, battery-powered heat/flow meter featuring the MAX35101 ultrasonic time-to-digital (TDC) converter with analog front-end (AFE). The reference design provides a high-performance flow/heat meter design platform that works as a foundation for many specific meter applications. The system utilizes the ultrasonic time-of-flight (TOF) measurement principle. A 3.6V, 4.0Ah, size A lithium -thionyl chloride battery powers the system and can last up to 20 years for typical use. Test results, hardware files, and firmware source code provide complete documentation for the design. The complete meter is also available for purchase.
The MAXREFDES38# subsystem reference design is a 3-channel, high-accuracy, low-power analog front-end solution for EPT/ECT and smart-grid current fault-sensing applications. Hardware, firmware, design files, and lab measurements provide complete system information for rapid prototyping and development.
The TWR-S08JE128-KIT is a low-cost development tool for the MC9S08JE low-power USB microcontroller. The kit is part of the NXP Tower System, a modular, reconfigurable development platform that enables designers to accelerate time to market by packaging evaluation boards, tools and runtime software.
NXPThe P1010 RDB is a highly integrated reference design board that can help you get to market faster.
The MCIMX6UL-EVK is designed to showcase the capabilities of i.MX 6 UltraLite and help ease your software development with support for the Linux® operating system.
The TWR-KV46F150M is a development tool for the Kinetis V series KV4x MCU family built on the Arm® Cortex®-M4 processor.
The TWR-K21D50M module is a development board for Kinetis K11, K12, K21 and K22 50 MHz 32-bit ARM Cortex-M4 MCUs.
The i.MX 8M Nano EVK provides a platform for rapid evaluation of i.MX 8M Nano and i.MX 8M Nano Lite applications processors.
The KITPF8100FRDMEVM and KITPF8200FRDMEVM are customer evaluation boards using the PF8100 and PF8200 power management ICs.
The KITPF8101FRDMEVM and KITPF8201FRDMEVM evaluation boards feature the PF8101/PF8201 energy management integrated circuit for high-performance processing applications
The QorIQ ® P1020 reference design board is a feature-rich platform that supports a variety of application requirements.
This reference design based on the Kinetis ® MKM34Z128 MCU provides a cost-optimized single-phase energy meter solution.
The NXP MK30X single-phase electricity meter reference design provides a high-performance power measurement solution for residential electricity metering.
This single-phase energy meter reference design is used for the measurement and registration of active and reactive energy within a directly connected single-phase two-wire network.
NXP's ASIL-D automotive system platform is a reference design that enables high-voltage power inverter control to drive electric vehicle traction motors and DC-DC converters.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
