KIT35XS3400EVBE: Evaluation Kit - MC35XS3400, Quad High Side Switch

XKT564L: Evaluation board for NXP ^{MPC564xL 32-bit dual-core Power Architecture® MCUs}

KIT10XS3435EVBE: Evaluation Kit - MC10XS3435, Quad Channel High-Side Switch

MTRCKTDPS5643L: Dual 3-phase PMSM development kit using NXP MPC5643L microcontroller

FRDM-34931S-EVB: Freedom expansion board for MC34931 - Brushed DC motor driver, H-bridge, 20kHz

CANFDuino: The best platform for open source, CAN-bus Arduino projects

CANFDuino supports CANFD, the latest version of the CAN bus standard, which can accommodate speeds up to 5 Mbps. It has two local ports with DB9 connectors in a housing that can be mounted on your vehicle or installed in your own projects. The platform is designed for tinkerers, hackers, and industry professionals looking for a ready-made, open source CAN bus solution that requires little or no hardware assembly.

Schematic PCB

12 V lead-acid battery management system with LIN

The RD9Z1-638-12V is a battery management system (BMS) designed to demonstrate the capabilities of the MM9Z1J638 battery sensor module in 12 V lead-acid applications where high EMC performance is required to obtain high-precision measurements of critical battery parameters.

Schematic PCB

S32K14W-Q064 Universal Evaluation Board

Schematic PCB

Matrix LED Controller ASL5015SHN Evaluation/Development Board

Schematic PCB

KIT35XS3500EVBE: Evaluation Kit - MC35XS3500, Smart Rear Corner Light Switch

Schematic PCB

MPC5775B BMS and VCU Reference Design

Schematic PCB

KIT33887EKEVBE: Evaluation Kit - 33887, Inductive Load Driver

Freedom Board for MC33HB2000AES,10 A, H-Bridge Motor Driver, HVQFN 28 6x6

Schematic PCB

CAN bus FPGA development board schematic diagram

Schematic PCB

KITPSCDEBUGEVM: Trace tool for PT2000 and MC33816

KITPSCDEBUGEVM is an easy-to-use board that enables users to debug microcode programmed in the PT2000 or MC33816.

MPC5606E Internet of Vehicles Evaluation Board

Schematic PCB

MPC55xxADAPTERS: MPC55xx adapters

OM7962: Low noise amplifier BFU520, BFU530 and BFU550 customer evaluation kit for SOT143 packaged transistors

Low noise amplifier BFU520, BFU530 and BFU550 customer evaluation kit for SOT143 packaged transistors

Active clamp forward, dual-output PD provides high-performance support for POE applications

This reference design is for a highly efficient, active-clamped forward, dual 3.3V/8.8V-output powered device (PD). The design features the MAX5969A and MAX5900 as its controllers. The design also uses the MAX5974C, which controls current-mode PWM converters and provides zero-voltage switching (ZVS) and frequency foldback to enhance supply efficiency. Using these devices, this RD is IEEE® 802.3at compliant and is a high-performance, compact, and cost-efficient solution for PoE and nonstandard high-power PDs. The design can also support the auxiliary input voltage to provide maximum 55W output power.

VLG-MC9S12ZVC: S12ZVC 16-bit mixed-signal MagniV MCU evaluation board