Introduction: Inverter grid-connected ASIWI solar inverter photovoltaic poverty alleviation inverter 10-50kw Factory internal information including BOM list schematic diagram unknown
Introduction: This project is a minimum electronic level based on arduino and GY521, with a size of only 44x18mm! Because it is too small to fit the parts, in order to reduce space, modules are not used and all are redesigned.
Introduction: This project is a solution verification business card based on NXP's NT3H1101W0FHKH nfc chip.
Introduction: This project is a super device based on esp07, with a size of only 1! It comes with a usb-a interface and a ch340e serial port chip. Plug it into the computer usb port, install the driver and you can use it directly. The board has 8 gpio, one 5v And a 3.3 power interface, convenient for development and use.
Introduction: This project is a super USB based on atmega328pb-au! It has high parts density and comes with its own serial port chip. And the special thing is to use pcb as usb
Introduction: Two nickel-metal hydride battery chargers realize automatic charging and turning lights function, simple and practical
Introduction: ip5306 power management module
Introduction: Supports PPS/PD3.0/QC4+/QC4.0/ACF/FCP/SCP/PE2.2/SFCP/VOOC and other protocols, the maximum power is 100w main control chip sw3518s
Introduction: Baby rest in peace, mother rest assured!
Introduction: This project is a portable transformation based on IC card. Provide some design ideas and samples, nothing more.
Introduction: Use a 12V single power supply to get ±12V for the 5532 headphone amplifier.
Introduction: Synchronize the network time in real time, display the time normally even if the network is disconnected, and collect the temperature and humidity of the room at the same time. Mainly to learn how to develop in linux+esp-idf environment