[AT-START-F425 Review] Unboxing Review

eew_xQfw2M

[AT-START-F425 Review] Unboxing Review [Copy link]

Without further ado, here are the pictures

1. First go to the official website to download the information (https://www.arterytek.com/cn/product/AT32F425.jsp#Resource)

Download pack and bsp packages,

2. In the pack package (keil5), select ArteryTek.AT32F425_DFP.2.0.1.pack and double-click to install

3. After unzipping the bsp package, open the project project\at_start_f425\examples\gpio\led_toggle\mdk_v5 and compile

4. Find a USB cable to connect to AT-Link. (Note here that you must make sure that the USB cable is complete. I just found a charging cable, but it couldn't connect. I couldn't find the device. Then I thought, maybe there are only power cord and ground wire, so I changed a good one, and then it worked.)

5. Options for target -> Settings -> Flash Download, check Reset and Run. If not checked, the code will not run automatically after downloading. You need to press reset before it can run Question: Why does Programming Algorithm have a .flash suffix instead of a .flm suffix?

6. Download

7. The running lights are smooth and smooth~