Flip-flop timing circuit composed of photodiodes, etc.
Source: InternetPublisher:失踪的猫 Keywords: trigger photodiode timing circuit trigger Updated: 2021/11/29
'
In the circuit,
Al is a comparator and A2 is a one-shot timer
. When the light is interrupted,
the current of the photodiode VD changes. The Al output triggers
A2, and the A2 output goes low and
remains low for 60s (determined by island and cl)
. Changing the resistance value of the resistor can change
the sensitivity of VD to light, but the ratio should
remain unchanged in order to provide a certain reverse
bias voltage for VD.
(2) Component parameter selection:
The selection of components is shown in Figure 3-20. There are no special requirements.
(3) The trigger timing circuit composed of photodiodes , etc. is as shown in the figure
- A simple magnetic switch circuit sharing
- Controlling LEDs with Node-RED in Raspberry Pi
- Simple phase failure protection circuit composed of intermediate relay
- Design and analysis of a four-bit remote control component capable of remote reset
- Design and analysis of voice control circuit
- Simple three-phase motor phase loss protection circuit
- PIC microcontroller controlled remote anti-theft alarm circuit
- Magnetic door and window anti-theft alarm
- Infrared detection alarm
- Password type motorcycle anti-theft device
- Gas flameout alarm circuit
- Darkroom timed exposure circuit three
- Discharge type one-shot timing circuit composed of PUT lamp
- Timing circuit composed of quartz electronic clock integrated circuit
- Timing circuit composed of HD1438
- Basic timing circuit composed of 555
- Touch-type adjustable timing circuit (2)
- repetitive timing circuit
- Photodiode socket
- Dual 555 constitutes a 4h sequential timing circuit