Standard Resistance Range.........................................................................................................................................................200 to 100 K ohms
Total Resistance Tolerance.................................................................................................................................................................................±5 %
Absolute Minimum Resistance ...................................................................................................... 1 ohm or 0.1 % maximum (whichever is greater)
Noise ................................................................................................................................................................................. 100 ohms ENR maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Power Rating (Voltage Limited By Power Dissipation or 450 VAC, Whichever is Less)
+40 °C ..........................................................................................................................................................................................................2 watts
+125 °C ......................................................................................................................................................................................................... 0 watt
Resolution.............................................................................................................................................................. See recommended part numbers
Operating Temperature Range .......................................................................................................................................................-40 °C to +125 °C
Storage Temperature Range ..........................................................................................................................................................-55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range
Vibration ............................................................................................................................................................................................................. 15 G
Wiper Bounce .................................................................................................................................................................0.1 millisecond maximum
Shock.................................................................................................................................................................................................................. 50 G
Wiper Bounce .................................................................................................................................................................0.1 millisecond maximum
Load Life .....................................................................................................................................................................................1,000 hours, 2 watts
Total Resistance Shift .................................................................................................................................................................... ±2 % maximum
Rotational Life (No Load).................................................................................................................................................1,000,000 shaft revolutions
Total Resistance Shift .................................................................................................................................................................... ±5 % maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift .................................................................................................................................................................... ±2 % maximum
IP Rating
Sealed Versions (-3, -4, -7, and -8) .................................................................................................................................................................IP 65
Unsealed Versions (-1 -2, -5, and -6) ..............................................................................................................................................................IP 40
Shaft Runout.......................................................................................................................................................................0.13 mm (0.005 in.) T.I.R.
Lateral Runout ....................................................................................................................................................................0.20 mm (0.008 in.) T.I.R.
Shaft End Play ....................................................................................................................................................................0.25 mm (0.010 in.) T.I.R.
Shaft Radial Play ................................................................................................................................................................0.13 mm (0.005 in.) T.I.R.
Pilot Diameter Runout ........................................................................................................................................................0.08 mm (0.003 in.) T.I.R.
Backlash ............................................................................................................................................................................................. 1.0 ° maximum
Weight ........................................................................................................................................................................................ Approximately 19 G
Terminals ................................................................................................................................................................................ Solder lugs or PC pins
Soldering Condition
Manual Soldering............................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire; 370 °C (700 °F) max. for 3 seconds
Wave Soldering .....................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max. for 5 seconds
Wash processes ....................................................................................................................................................................... Not recommended
Marking ......................Manufacturer’s name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code.
Ganging (Multiple Section Potentiometers) .......................................................................................................................................1 cup maximum
Hardware ............................................................................................. One lockwasher and one mounting nut is shipped with each potentiometer.
NOTE: For Anti-rotation pin add 91 after configuration dash number. Example: -2 becomes -291 to add AR pin.
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
2
Consult manufacturer for complete specification details for resistances below 1k ohms.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.
Ro VE LEA
HS RS D
C ION FRE
OM S E
PL AR
IA E
NT
*
5.08 ± .38
(.200 ± .015)
1
2
5.08 ± .38
(.200 ± .015)
6.99 ± .38
(.275 ± .015)
10.31 +.00/-.10
(.406 +.000/-.004)
3
*SEE
NOTE
.76 ± .25
R
.030 ± .010
.81
(.032)
SHAFT DIA. (SEE
PART NUMBERS)
BUSHING DIA. (SEE
PART NUMBERS)
.81 ± .25
(.032 ± .010)
20.63 ± .81
(.812 ± .032)
3590 - Precision Potentiometer
Product Dimensions
18.59 ± .38
(.732 ± .015)
.25
(.010)
7.93
(.312)
5.08 ± .38
(.200 ± .015)
-1, -3, -5, -7 Configurations
-2, -4, -6, -8 Configurations
6.99 ± .38
5.08 (.275 ± .015)
± .38
5.08 ± .38
5.08 ± .38
10.31 +.00/-.10
(.200 ± .015)
(.200 ± .015)
(.200 ± .015)
5.08 ± .38
(.406 +.000/-.004)
6.99 ± .38
5.08 ± .38
12.2
15.54
3
*SEE
(.200 ± .015)
6.99 ± .38
(.275 ± .015)
.76 ± .25
1
NOTE
(.200 ± .015)
5.08 ± .38
(.480)
R
(.612)
5.08 ± .38
(.275 ± .015)
.030
10.31 +.00/-.10 ± .010
2
6.99 ± .38
10.31 + .00/- .13
R MAX.
(.200 ± .015)
(.200 ± .015)
(.406 +.000/-.004) .81
(.275 ± .015)
(.406+.000/-.005)
3
*SEE
10.31 + .00/- .13
3
(.032)
.76 ± .25
1
NOTE
BUSHING DIAMETER
1
11.81
R
(.406+.000/-.005)
*SEE
.030 ± .010
(SEE PART NUMBERS)
2
(.465)
NOTE
2
BUSHING DIAMETER
1
.81
3
.81
SHAFT DIA. (SEE
(SEE PART NUMBERS)
(.032)
(.032)
2
.25
12.70 ±0.25
PART NUMBERS)
DIA.
.81
(.010)
(.500 ± .010)
DIA.
22.22 ± .38
BUSHING DIA. (SEE
(.032)
MOUNTING SURFACE
PART NUMBERS)
SHAFT DIAMETER (.875 ±.015)
SHAFT DIA. (SEE
.81 ± .25 NUMBERS)
.25
5.08 ± .38
.25
(SEE PART NUMBERS)
PART
(.032 ± .010)
(.010)
7.93
(.010)
(.200 ± .015)
SHAFT DIAMETER
1.19
BUSHING DIA. (SEE
.25
(SEE PART NUMBERS)
(.312)
5.08 ± .38
PART NUMBERS)
(.047)
6.99 ± .38
7.92
*BUSHING THREAD SPECIFICATIONS:
20.63 ± .81
18.59 ± .38
(.010)
(.200 ± .015)
.81 ± .25
1.19
-1, -2, -3, -4 .... 3/8-32 UNF
(.275 ± .015)
(.312)
(.812 ± .032)
(.732 ± .015)
10.31 +
± .38
.13
(.032 ± .010)
7.93
(.047)
-5, -6, -7, -8 .... M9 x 0.75-7H
5.08
.00/-
20.62 ± .81
7.92
18.6 ± .4
(.406+.000/-.005)
(.312)
(.200 ± .015)
(.312)
(.812 ± .032)
(.732 ± .015)
20.63 ± .81
18.59 ± .38
5.08 ± .38
BUSHING DIAMETER
1
3
20.62 ± .81
18.6 ± .4 PART
6.99 ± .38
(.812 ± .032)
(.732 ± .015)
(.200 ± .015)
(SEE
NUMBERS)
2
(.812 ±
(.732 ± .015) .81
(.275 ± .015)
10.31 + .00/- .13
.032)
12.2
12.2
15.54
(.032)
(.48)
(.406+.000/-.005)
15.54
(.480)
BUSHING DIAMETER
(.612)
1
R MAX.
3
(.612)
(SEE PART
12.2
NUMBERS)
R MAX.
2
.81
(.48)
SHAFT DIAMETER
15.54
12.2
15.54
MAX.
.25
(SEE PART
R
NUMBERS)
(.032)
11.81
(.612)
(.480) 11.81
(.612)
(.010)
(.465)
1.19
(.465)
R MAX.
(.047)
SHAFT DIAMETER
11.81
7.92
12.70
PART NUMBERS)
22.22 ± .38
.25
12.70 ±0.25
(SEE
DIA.
DIA.
(.465)
DIA.
(.312)
11.81
(.500)
(.875 ±.015)
(.010)
(.500 ± .010)
DIA.
22.22 ± .38
1.19
(.465)
20.62 ± .81
18.6 ± .4
MOUNTING SURFACE
MOUNTING SURFACE
(.875 ±.015)
12.70
22.22 ± .38
7.92
(.812 ± .032)
DIA.
(.047)
(.732 ± .015)
DIA.
12.70 ±0.25
(.312)
(.500)
(.875
MOUNTING HOLE LOCATIONS
DIA.
RECOMMENDED PC BOARD
±.015)
(.500 ± .010)
DIA.
20.62 ± .81
18.6 ± .4
22.22 ± .38
MOUNTING SURFACE
HOLE DIAMETER
FMS
(.812 ± .032)
(.732 ± .015)
12.2
PC PIN
(.875 ±.015)
12.19 ± 0.51
MOUNTING SURFACE
Recommended PCB Layout
Terminal Styles
*BUSHING THREAD SPECIFICATIONS:
TERMINAL
2.08
RECOMMENDED PC BOARD MOUNTING HOLE LOCATIONS
(.480 ± .020)
(.48)
(.082)
-1, -2, -3, -4 .... 3/8-32 UNF
15.54
THICKNESS
CCW
CW
R MAX.
HOLE DIAMETER
“P” Terminal
1.63 ± 0.38
-6, -7, -8 .... M9 x 0.75-7H
Style
-5,
12.2
FMS
.305 ± .003
(.612)
2
1
3
PC PIN
2.08
12.19 ± 0.51
(.064 ± .015)
(.48)
(.012 ± .0001)
*BUSHING THREAD SPECIFICATIONS:
TERMINAL
15.54
(.082)
(.480 ± .020)
R MAX.
-1, -2, -3, -4 .... 3/8-32 UNF
CCW
CW
11.81
CW
THICKNESS
(.612)
1.63 ± 0.38
-5, -6, -7, -8 .... M9 x 0.75-7H
.305 ± .003
(.465)
2
1
3
5.08 5.08 6.99
(.064 ± .015)
11.81
(.012 ± .0001)
(.275)
(.200) (.200)
(.465)
12.70
CW
22.22 ± .38
3.30 ± 0.38
DIA.
DIA.
(.500) 5.08 6.99
(.875 ±.015)
TOLERANCES: EXCEPT WHERE NOTED
5.08
(.130 ± .015)
12.70
22.22 ± .38
.508
MOUNTING
.127
SURFACE
(.200)
DECIMALS: .XX
±.015)
DIA.
(.200) (.275)
(.500)
DIA.
(.875
± (.02), .XXX ± (.005)
3.30 ± 0.38
RECOMMENDED PC
FRACTIONS: ±1/64
HOLE LOCATIONS
MOUNTING SURFACE
BOARD MOUNTING
TOLERANCES: EXCEPT WHERE NOTED
(.130 ± .015)
Schematic
HOLE DIAMETER
DIMENSIONS: MM
PC BOARD MOUNTING HOLE LOCATIONS
RECOMMENDED
.508
.127
FMS
DECIMALS: .XX ±
.XXX ±
(IN.)
2.08
HOLE DIAMETER
(.005)
FMS
(.02),
(.082)
2.08
FRACTIONS: ±1/64
CCW
CW
(.082)
MM
CCW
CW
DIMENSIONS:
2
1
3
(IN.)
“S” Terminal Style
2
1
3
12.19 ± 0.51
CW
(.480 ± .020)
CW
5.08 5.08 6.99
2.54
5.08 5.08 6.99
(.200) (.200) (.275)
(.100) 12.19 ± 0.51
(.200) (.200) (.275)
(.480 ± .020)
3 PLCS.
SOLDER LUG
TOLERANCES: EXCEPT WHERE NOTED
TOLERANCES: EXCEPT WHERE NOTED
2.54
TERMINAL
.508
.127
.508
.127
DECIMALS: .XX ±
.XXX ±
0.86 (.100)
(.02),
DECIMALS: .XX ± (.02), .XXX ± (.005)
(.005)
SOLDER LUG
(.034) 3 PLCS.
FRACTIONS: ±1/64
FRACTIONS: ±1/64
TERMINAL
3 PLCS.
MM
MM
DIMENSIONS:
DIMENSIONS:
(IN.)
0.86
(IN.)
(.034)
3 PLCS.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.
3590 - Precision Potentiometer
Recommended Part Numbers
(Printed Circuit)
3590P-2-102L
3590P-2-202L
3590P-2-502L
3590P-2-103L
3590P-2-203L
3590P-2-503L
3590P-2-104L
(Solder Lug)
3590S-2-102L
3590S-2-202L
3590S-2-502L
3590S-2-103L
3590S-2-203L
3590S-2-503L
3590S-2-104L
(Solder Lug)
3590S-1-102L
3590S-1-202L
3590S-1-502L
3590S-1-103L
3590S-1-203L
3590S-1-503L
3590S-1-104L
Resistance (Ω)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
Resolution (%)
.029
.023
.025
.020
.019
.013
.009
BOLDFACE
LISTINGS ARE IN STOCK AND READILY AVAILABLE
THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY.
ROHS IDENTIFIER:
L = COMPLIANT
Panel Thickness Dimensions
(For Bushing Mount Only)
2.46 - 3.81
(.097 - .150)
Shaft & Bushing Configurations
(Bushing - DxL, Shaft - D):
(-1) Plastic Bushing (3/8 ” x 5/16 ”) and
Shaft (.2480 + .001, - .002)
PANEL
(-2) Metal Bushing (3/8 ” x 5/16 ”) and
Shaft (.2497 + .0000, - .0009)
(-3) Sealed, Plastic Bushing (3/8 ” x 5/16 ”) and
Shaft (.2480 + .001, - .002)
(-4) Sealed, Metal Bushing (3/8 ” x 5/16 ”) and
Shaft (.2497 + .0000, - .0009)
(-5) Metric, Plastic Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .076 mm)
(-6) Metric, Metal Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .023 mm)
HEX NUT
LOCKWASHER
POT
(-7) Metric, Sealed, Plastic Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .076 mm)
(-8) Metric, Sealed, Metal Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .023 mm)
10.44 ± .07
DIA.
(.411 ± .003)
R
7.42
(.292)
ADDITIONAL HOLE FOR
ANTI-ROTATION PIN
1.60 +.08/-.03
DIA.
(.063 +.003/-.001)
Anti-rotation pin hole is shown at six o'clock
position for reference only. The actual location is
determined by the customer's application. Refer
to the front view of the potentiometer to see the
location of the optional A/R pin.
Panel thickness and hole diameters are
recommended for best fit. However, customers
may adjust the dimensions to suit their specific
application.
DIMENSIONS:
MM
(INCHES)
TOLERANCES: ±
0.127
(.005)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.
REV. 11/17
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns
®
products manufactured by or on behalf of Bourns, Inc. and
its affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns
®
products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that
such information is current and complete.
The characteristics and parameters of a Bourns
®
product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns
®
product in a user application may vary
from the data sheet characteristics and parameters due to a combination of the Bourns
®
product with other components in
the user’s application or due to the environment of the user application itself. Such characteristics and parameters also can
and do vary in different applications and actual performance may vary over time. Users should always verify actual performance
of the Bourns
®
product in their specific devices and applications, and make their own independent judgments about how
much additional test margin to design in to compensate for differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns
®
product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns
®
product to meet requirements of such industry standard or such particular qualification. Users
of Bourns
®
products are responsible for ensuring compliance with safety-related requirements and standards applicable to
their applications.
Bourns
®
products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining
applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property
or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on
a case-by-case basis, use of any Bourns
®
products in such unauthorized applications is at the user’s sole risk. Life-critical
applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent
classifications outside of the United States.
Bourns
®
standard products that are designed and tested for use in automotive applications will be described on the applicable
data sheets as compliant with the applicable AEC-Q standard. Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns
®
standard products in an automotive
application is not recommended, authorized or intended and will be at the user’s sole risk.
Bourns
®
standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns
®
standard products that are designed and tested for use in aircraft or space
applications will be described on the applicable data sheets as compliant with the RTCA DO-160 standard. Unless expressly
and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other
Bourns
®
standard product in an aircraft or space application is not recommended, authorized or intended and will be at the
user’s sole risk.
The use and level of testing applicable to Bourns
®
custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns
®
custom products are specially designed. Absent a written agreement between Bourns
and the user regarding the use and level of such testing, the provisions above applicable to Bourns
®
standard products shall
also apply to such Bourns
®
custom products.
Users shall not sell, transfer, export or re-export any Bourns
®
products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns
®
products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns
®
products, technology or technical data may not under any circumstance be exported or
re-exported to countries subject to international sanctions or embargoes, and Bourns
®
products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to
receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability arising out of the application or
use of any Bourns
®
standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential
or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose,
non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
It took me a day to fix a low-level error. The program could not run normally. The solution was as follows:there was no display when the computer was turned on, and it seemed that the program did not ...
I recently read the CAN example of ZLG, and there is a GPIOPinconfigure() function in it, but I looked at the GPIO driver function library and did not find such a function. Where can I find the docume...
I want to write a multi-serial port driver for a Linux system under PowerPC, but I have never done this before. Please give me some advice and what are the general steps to do this? Thank you very muc...
People who often buy optical modules know that optical fiber modules usually need to confirm the compatibility code, because there are currently two types on the market, one is a high-performance comp...
[i=s] This post was last posted by Mufan001 on 2017-3-17 10:53 Edit [/i] [size=3]1-6. Forward transformer switching power supply [/size] [size=3]The transient control characteristics and output voltag...
If the ultimate form of a car is a silicon-based life form, then in
the field of
intelligent driving
, it has gradually taken on the appearance of a "veteran driver." In
the field of
the ...[Details]
On August 24th, Jin Yuzhi, CEO of Huawei's Intelligent Automotive Solutions BU, announced the first automotive application of Huawei Qiankun's unique Limera technology. This technology eliminates t...[Details]
Wave soldering is a crucial electronic component soldering technique used in the production of a wide range of electronic devices, from home appliances to computers to avionics. The process is wide...[Details]
introduction
Bluetooth technology is a short-range wireless communication technology designed to replace wired cables. It is a wireless communication technology standard developed by the SIG, ...[Details]
As more and more consumers purchase new energy vehicles, the safety of electric vehicles has become a major concern. This has been particularly prominent following a series of electric vehicle fire...[Details]
On August 18th, Galaxis, a specialist in integrated intelligent intralogistics robotics, officially unveiled its next-generation, ultra-narrow aisle forklift mobile robot, the "VFR Ultra-Narrow Ser...[Details]
When discussing autonomous driving technology, there are often two extremes: on the one hand, there's the vision of "fully autonomous driving," while on the other, there's concern about potential s...[Details]
A half-bridge is an inverter topology for converting DC to AC. A typical half-bridge circuit consists of two controller switches, a three-wire DC power supply, two feedback diodes, and two capacito...[Details]
Chinese characters are extensive and profound, and there are many different names for ESD tubes. How many of them do you know?
As far as I know, ESD diodes are currently known as ESD p...[Details]
Over the past decade, the narrative surrounding fuel vehicles has been one of decline and replacement. Under the onslaught of new energy vehicles, traditional automakers have been forced to acceler...[Details]
Plug-in hybrid vehicles (PHEVs) utilize two powertrains. Their pure electric range is typically inferior to that of pure electric vehicles, often reaching less than half that. Currently, mainstream...[Details]
For self-driving cars, LiDAR is the sensory organ that allows them to "see the road." Simply put, its operating principle involves sending out a laser beam, receiving the echo, and ultimately gener...[Details]
introduction
The widespread use of air conditioner communication circuits began with the rise of household inverter air conditioners. With China's energy conservation and emission reduction in...[Details]
Most cameras on the market use chips manufactured by Japanese companies like Sony, Sharp, Panasonic, and LG. South Korea now has the capability to produce chips, but the quality is somewhat inferio...[Details]
Today,
the Intel®
Universal
Quick Connector (UQD) Interchangeability Alliance was officially established
. At the inaugural ceremony, Intel and its first certified partners—Invicta...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
