MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Differential Receiver
The MC10EL/100EL16 is a differential receiver. The device is
functionally equivalent to the E116 device with higher performance
capabilities. With output transition times significantly faster than the E116
the EL16 is ideally suited for interfacing with high frequency sources.
The EL16 provides a VBB output for either single-ended use or as a DC
bias for AC coupling to the device. The VBB pin should be used only as a
bias for the EL16 as its current sink/source capability is limited. Whenever
used, the V BB pin should be bypassed to ground via a 0.01µf capacitor.
Under open input conditions (pulled to VEE) internal input clamps will
force the Q output LOW.
MC10EL16
MC100EL16
•
•
•
•
250ps Propagation Delay
High Bandwidth Output Transitions
75kΩ Internal Input Pulldown Resistors
>1000V ESD Protection
8
1
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751-05
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
NC 1
8
VCC
D
2
7
Q
D
3
6
Q
PIN DESCRIPTION
VBB
4
5
VEE
PIN
D
Q
VBB
FUNCTION
Data Inputs
Data Outputs
Ref. Voltage Output
12/93
©
Motorola, Inc. 1996
3–1
REV 2
MC10EL16 MC100EL16
OUTLINE DIMENSIONS
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751–05
ISSUE P
–A–
B
M
8
5
X 45
_
J
1
4
4X
–B–
M
_
G
F
NOTES:
1. DIMENSIONS A AND B ARE DATUMS AND T IS A
DATUM SURFACE.
2. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
3. DIMENSIONS ARE IN MILLIMETER.
4. DIMENSION A AND B DO NOT INCLUDE MOLD
PROTRUSION.
5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
6. DIMENSION D DOES NOT INCLUDE MOLD
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS
OF THE D DIMENSION AT MAXIMUM MATERIAL
CONDITION.
DIM
A
B
C
D
F
G
J
K
M
P
R
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.35
0.49
0.40
1.25
1.27 BSC
0.18
0.25
0.10
0.25
0
_
7
_
5.80
6.20
0.25
0.50
P
0.25 (0.010)
M
–T–
8X
C
SEATING
PLANE
D
0.25 (0.010)
M
K
T B
S
A
S
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed:
Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454
MFAX:
RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609
INTERNET:
http://Design–NET.com
R
JAPAN:
Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
ASIA/PACIFIC:
Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
◊
ECLinPS and ECLinPS Lite
DL140 — Rev 3
3–3
*MC10EL16/D*
MC10EL16/D
MOTOROLA
51mcu
京公网安备 11010802033920号
EEWORLD
