COMMUNICATIONS, DATA, CONSUMER DIVISION
QUICKIE
Cable-to-board Connectors
for Pin-in-Paste Processes
TM
Quickie
™
Cable-to-board Connectors for Pin-in-Paste Processes
Description
Quickie™ is FCI’s brand for
cable-to-board connectors in 2.54mm
pitch. The Quickie™ product range
includes IDC Receptacles, IDC Board
Connectors, Shrouded Low Profile
Headers and Shrouded Eject Latch
Headers.
FCI is adding four new series of
Quickie Headers to its product range,
dedicated to Pin-in-Paste soldering
processes. This brochure gives
additional information for the correct
use of Quickie PiP connectors in the
application process.
Pin-in-Paste
Pin-in-Paste (PiP) technology allows
the use of TMT products in SMT
manufacturing processes. The
connectors are automatically or
manually placed on the board, then
soldered in the same operation
as the SMT components. Despite this,
the mechanical strength of the TMT
soldering is maintained – still an
important requirement for connectors
nowadays in many industrial or
automotive applications.
Part number
8-Digit Base Part Number
Shrouded Superslim Header
10056844
= Straight
10056845
= Right Angle
1 = 0,76 µm gold on mating area,
tin on solder side
Plating
Total positions
Option
LF
Option
= Tube without pick-up cap
A = Tape with pick-up cap (availability according to TA-893)
6, 8, 10, 14, 16, 20, 26, 30, 34, 40
Quickie
™
Cable-to-board Connectors for Pin-in-Paste Processes
Application
design
guidelines
For application in a Pin-in-Paste
process, FCI recommends the
application design guidelines below.
STENCIL DESIGN:
The stencil design is crucial for a good
solder joint. It determines the quantity
of paste and the position of the paste
print on the board. Each PCB hole has
its own stencil aperture with enough
spacing in between in order to have
separate solder deposits.
This prevents solder robbing from one
hole to another and guarantees the
correct quantity of solder paste for
each hole. The print position is slightly
asymmetrical so as to optimise the
flow of molten solder paste.
basics+
Service Program
Quickie
TM
is part of the
basics+
product range.
basics+
is a service
program built around 2.54mm and
2mm pitch connectors for
board-to-board, wire-to-board
and cable-to-board applications.
basics+
makes the entire product
design-in process very simple,
with easy-to-use product selection,
technical hot line, fast sample
service, and core range products.
Included are established, proven
brands such as BergStik, Dubox,
Quickie and Minitek.
PASTE APPLICATION:
The quantity of paste for each hole
depends on the soldering process
parameters and the degree of hole
filling. For the squeegee,
FCI recommends a 45° angle. You
can use a smaller angle for an even
greater degree of hole filling. The
squeegee moves in parallel with the
shorter sides of the stencil apertures.
BOARD LAYOUT:
Please use a hole of 1.00 +/- 0.05mm
for an optimum paste deposit.
For automatic pick-and-place, lean
towards the upper end of the
tolerance.
Refer also to TA-894 for further
information.
Quickie
™
Cable-to-board Connectors for Pin-in-Paste Processes
Connector
design
In order to achieve optimum soldering
results, FCI launches dedicated
Pin-in-Paste connectors in the
basics+
product range. These
connectors are fully adapted to
Pin-in-Paste processing in all aspects,
including plastic material, housing
design, pin length, and packaging.
PLASTIC MATERIAL:
Quickie PiP headers are moulded in
high temperature thermoplastic and
are able to withstand temperature
exposure up to 260°C peak for 10 to
30 seconds in a convection infrared
or vapour-phase reflow oven.
HOUSING DESIGN:
Standoffs raise the housing body
slightly above the PCB surface and
thus allow the molten solder paste to
flow freely from its printed position
into the board hole and around the
pin. The standoffs are correctly
positioned for a good solder paste
deposit around the pin. Please respect
the stencil design guidelines below in
order to avoid paste deposit around
the standoffs.
PIN LENGTH:
The connector lead length beyond
the bottom of the PCB is shorter than
for traditional TMT products. Thus, the
risk of pushing out the solder paste
when inserting the pin into the PCB
hole is very much limited. The solder
paste will not stick on the pin tip or
even fall off completely, but stays
around the pin for free flow during
soldering. FCI uses a solder tail length
of 2 +/-0.2 mm for Quickie Headers for
a standard PCB of 1.6 mm thickness.
PACKAGING:
For combining SMT and TMT components not only in the soldering process, but
also in the assembly process, FCI proposes a choice of pick-and-place packaging
for PiP connectors. The most common part numbers are available in tape-on-reel
packaging, all others in tube.
Technical Data
MATERIALS
Housing: high temperature thermoplastic
Colour: black
Flammability rating: UL 94 V-0
Pin: Phosphor bronze
Plating: Gold and tin over 1.27
µm
nickel
Current rating: 3A continuous
Insulation resistance: 10,000 MΩ min.
Dielectric withstanding voltage: 1,500 V
Pin retention to housing: 20 N min.
ELECTRICAL PERFORMANCE
MECHANICAL PERFORMANCE
OPERATING TEMPERATURE RANGE
-65°C to +125°C
PROCESSING INFORMATION
Compatible with IR reflow soldering
processes
This product is RoHS compatible
according to the European Union Directive
2002/95/IEC
File n° E66906
File n° LR46923
Product drawing: by 8-digit base part
number
Product specification: BUS-12-055
Tape-on-Reel specification: TA-893
Application specification: TA-894
Reflow profile: TA-842
RoHS INFORMATION
REFERENCE INFORMATION
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
FCI
:
10056844-126ALF 10072353-F01-02LF 10072353-F01-03LF 10072354-F01-04LF 10075024-F01-02LF 10075024-
F01-03LF 10075025-F01-04LF 10075025-F01-06LF 10056844-120ALF 10056844-140ALF 10056844-108ALF
10075025-G01-06ALF 10075024-F01-18ALF 10075024-F01-20ALF 10075024-F01-22ALF 10075024-G01-18ALF
10075024-G01-20ALF 10075024-G01-22ALF 10075025-F01-06ULF 10075025-G01-06ULF 10056844-110ALF
10056844-114ALF 10056844-116ALF 10072354-F01-06ULF 10072354-G01-06ULF 10072353-G01-03ULF
京公网安备 11010802033920号
EEWORLD
