SSTUB32866
1.8 V 25-bit 1 : 1 or 14-bit 1 : 2 configurable registered buffer
with parity for DDR2-800 RDIMM applications
Rev. 02 — 9 October 2006
Product data sheet
1. General description
The SSTUB32866 is a 1.8 V configurable register specifically designed for use on DDR2
memory modules requiring a parity checking function. It is defined in accordance with the
JEDEC standard for the SSTUB32866 registered buffer. The register is configurable
(using configuration pins C0 and C1) to two topologies: 25-bit 1 : 1 or 14-bit 1 : 2, and in
the latter configuration can be designated as Register A or Register B on the DIMM.
The SSTUB32866 accepts a parity bit from the memory controller on its parity bit
(PAR_IN) input, compares it with the data received on the DIMM-independent D-inputs
and indicates whether a parity error has occurred on its open-drain QERR pin
(active LOW). The convention is even parity, that is, valid parity is defined as an even
number of ones across the DIMM-independent data inputs combined with the parity input
bit.
The SSTUB32866 is packaged in a 96-ball, 6
×
16 grid, 0.8 mm ball pitch LFBGA
package (13.5 mm
×
5.5 mm).
2. Features
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Configurable register supporting DDR2 up to 800 MT/s Registered DIMM applications
Configurable to 25-bit 1 : 1 mode or 14-bit 1 : 2 mode
Controlled output impedance drivers enable optimal signal integrity and speed
Meets or exceeds SSTUB32866 JEDEC standard speed performance
Supports up to 450 MHz clock frequency of operation
Optimized pinout for high-density DDR2 module design
Chip-selects minimize power consumption by gating data outputs from changing state
Supports SSTL_18 data inputs
Checks parity on the DIMM-independent data inputs
Partial parity output and input allows cascading of two SSTUB32866s for correct parity
error processing
Differential clock (CK and CK) inputs
Supports LVCMOS switching levels on the control and RESET inputs
Single 1.8 V supply operation (1.7 V to 2.0 V)
Available in 96-ball, 13.5 mm
×
5.5 mm, 0.8 mm ball pitch LFBGA package
3. Applications
I
400 MT/s to 800 MT/s DDR2 registered DIMMs desiring parity checking functionality
Linux and Android
京公网安备 11010802033920号
EEWORLD
