MAXIMUM
SOLUTIONS
Mill-Max Expands its Line of Receptacles with Organic Fibre Plug®
Solder Barrier -- 14 Styles Offered, Tape & Reel Packaged
Mill-Max’s organic fibre plug (OFP®) solder
barrier receptacles are discrete sockets for
through-hole soldering into printed circuit
boards. These open bottom receptacles are
fitted with organic fibre plugs to prevent
solder, paste or flux from contaminating
the internal contact during the placing and
soldering process. When the device/mating
lead is plugged into the receptacle the OFP® is
knocked out allowing the mating lead to pass
through the fingers of the internal contact
and make a reliable electrical connection.
14 sizes/styles are now available, 13 have stan-
dard tape & reel packaging. The advantage of tape & reel packaging for these receptacles is it permits through-hole
components to be placed simultaneously with surface mount parts on pick-’n-place assembly lines – eliminating the
need to hand place the receptacles in an additional manufacturing step. The OFP® barrier permits the sockets to be
vacuum picked from the tape prior to placement in a hole in the circuit board.
The knock-out-bottom feature enables these sockets to be made relatively short compared to many similar recep-
tacles. The reduced length provides two advantages: the receptacles can stand upright and stable in a carrier tape
pocket and the protrusion through the PCB is minimal — especially important when working with SMT boards. The
open bottom receptacle design eliminates the need to trim long device leads that would otherwise bottom out in
a closed receptacle design and also makes them ideal for low profile board stacking applications via the ability to
pass through.
The OFP® parts are available as discrete receptacles and can be supplied in bulk or on carrier tape per EIA-481 for
industry standard pick and place machines. All Mill-Max receptacles use a precision-machined brass housing with a
press-fit beryllium copper “multi-finger” contact.
(Intrusive reflow (also called “pin-in-paste”) is a technique of using conventional through-hole components in a reflow soldering process. The
receptacles are placed into plated-through holes (PTH) in the circuit board (solder paste has previously been screen printed on pads adjacent
to the holes) and the board is reflowed in the same pass as other SMT components. Solder will fill the PTH and achieve solder joints as reliable
as wave soldering. The OFP® barrier prevents solder paste from being picked-up inside the contact during pick ‘n place assembly. “Overprinting”
paste on the solder mask can be used to adjust the volume of paste required to fill each hole.)
Visit
www.mill-max.com/PR626
for more information.
(7/13 -- 626)
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, Oyster Bay, NY 11771
516-922-6000 • Fax: 516-922-9253 •
www.mill-max.com
PIN
RECEPTACLES
PIN RECEPTACLES
WITH ORGANIC FIBRE PLUG
®
SOLDER BARRIER
(SEE SPECIFIC CONTACT RANGE ON PAGES 250, 251 & 253)
•
These
through-hole (tubular) receptacles are designed for hand, wave or
reflow soldering.
The
ORGANIC FIBRE PLUG
®
barrier prevents solder paste or
flux from
contaminating
the spring
contact.
•
After soldering, the
OFP
®
barrier is pushed out of the receptacle when the
device is plugged in.
•
All parts are available as discrete receptacles or supplied on
carrier
tape per
EIA-481 to feed industry standard pick and place machines.
Intrusive reflow (also called “pin-in-paste”) is a technique of using conventional through-hole
components in a reflow soldering process. The receptacles are placed into plated through-holes in the
circuit board (solder paste has previously been screen printed on pads adjacent to the holes) and the
board is reflowed in the same pass as other SMT components. Solder will fill the plated through-holes and achieve solder joints as reliable as wave soldering.
The OFP® barrier prevents solder paste from being picked-up inside the contact during pick ‘n place assembly. “Overprinting” paste on the solder mask can be used
to adjust the volume of paste required to fill each hole.
4428
4428-0-XX-XX-04-XX-10-0
5359
Solder mount in
Ø
.032” max. PTH
#04
Contact for
Ø
.008” - .013” pins
Also available on
16mm
wide
carrier
tape:
3,400 parts per
13”
reel
5359-0-XX-XX-10-XX-10-0
0577
Solder mount in
Ø
.043”
±
.003” PTH
#10
Contact for
Ø
.012” - .017” pins
Also available on
16mm
wide
carrier
tape:
3,000 parts per
13”
reel
.048 DIA.
0577-0-XX-XX-21-XX-10-0
4015
Solder mount in
Ø
.045”
±
.003” PTH
#21
Contact for
Ø
.015” - .022” pins
Also available on
12mm
wide
carrier
tape:
3,000 parts per
13”
reel
.058 DIA.
4015-0-XX-XX-30-XX-10-0
Solder mount in
Ø
.057”
±
.003” PTH
#30
Contact for
Ø
.015” - .025” pins
Also available on 8mm wide
carrier
tape:
5,500
parts per
13”
reel
.068 DIA.
.034 DIA.
.028 DIA.
.013
.055 .064
.038 DIA.
.010
.060
.071
.025
.086
.020
.089
.100
.040 DIA.
.052 DIA.
.100
.0205 DIA.
.006
.028 DIA.
.009
.031 DIA.
.009
.043 DIA.
.009
PAGE 196 | PIN RECEPTACLES
SPECIFICATIONS:
Shell Material:
Brass Alloy 360,
1/2
Hard
Contact Material:
Beryllium Copper Alloy
172,
HT
Solder Barrier:
Organic Fibre Plug
®
Dimensions: Inches
Tolerances On:
Lengths:
±
.005
Diameters: ±
.002
Angles:
±
2
°
RoHS - 2
2011/65/EU
ORDER CODE: XXXX - 0 - XX - XX -
XX
- XX - XX - 0
BASIC PART #
SPECIFY CONTACT FINISH:
SPECIFY PACKAGING:
27
30 ”
GOLD
OVER
NICKEL
(RoHS)
43
Discrete
Receptacles
02
100
”
TIN/LEAD
OVER
NICKEL
67
Supplied on
13”
Reels
84
200 ”
TIN
OVER
NICKEL
(RoHS)
SPECIFY SHELL FINISH:
01
200 ”
TIN/LEAD
OVER
NICKEL
80
200 ”
TIN
OVER
NICKEL
(RoHS)
CONTACT:
#04, #10, #21 or #30
CONTACT (DATA ON PAGES 250, 251 & 253)
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com
PIN
RECEPTACLES
PIN RECEPTACLES
WITH ORGANIC FIBRE PLUG
®
SOLDER BARRIER
(SEE SPECIFIC CONTACT RANGE ON PAGES 254 - 262)
0337
0337-0-XX-XX-15-XX-10-0
.020
.078 DIA.
.058 DIA.
Solder mount in
Ø
.066”
±
.003” PTH
#15
Contact for
Ø
.020” - .032” pins
Also available on 8mm wide
carrier
tape:
6,000 parts per
13”
reel
4280
4280-0-XX-XX-16-XX-10-0
Solder mount in
Ø
.067”
±
.003” PTH
#16
Contact for
Ø
.022” - .034” pins
Also available on 8mm wide
carrier
tape:
6,000 parts per
13”
reel
.078 DIA.
.062 DIA.
5280
5280-0-XX-XX-16-XX-40-0
Solder mount in
Ø
.067”
±
.003” PTH
#16
Contact for
Ø
.022” - .034” pins
Also available on
16mm
wide
carrier
tape:
2,200 parts per
13”
reel
0332
0332-0-XX-XX-18-XX-10-0
.018
Solder mount in
Ø
.079”
±
.003” PTH
#18
Contact for
Ø
.037” - .043” pins
Also available on
16mm
wide
carrier
tape:
2,200 parts per
13”
reel
.020
.089
.085 DIA.
.100
.045
.089
.100
.090 DIA.
.072 DIA.
.062
.105
.088 .100
.056 DIA.
.062 DIA.
.056 DIA.
.047 DIA.
.009
.051 DIA.
.009
.051 DIA.
.009
.061 DIA.
.009
0479
0479-0-XX-XX-34-XX-10-0
0375
Solder mount in
Ø
.077”
±
.003” PTH
#34
Contact for
Ø
.032” - .046” pins
Also available on
16mm
wide
carrier
tape:
2,200 parts per
13”
reel
.018
.090 DIA.
0375-0-XX-XX-02-XX-10-0
0353
Solder mount in
Ø
.087”
±
.003” PTH
#02
Contact for
Ø
.040” - .050” pins
Also available on
12mm
wide
carrier
tape:
4,500 parts per
13”
reel
.030
.100 DIA.
0353-0-XX-XX-03-XX-10-0
0384
Solder mount in
Ø
.106”
±
.003” PTH
#03
Contact for
Ø
.040” - .060” pins
Also available on
12mm
wide
carrier
tape:
1,300
parts per
13”
reel
.030
.125 DIA.
0384-0-XX-XX-23-XX-10-0
Solder mount in
Ø
.105”
±
.003” PTH
#23
Contact for
Ø
.045” - .065” pins
Also available on
12mm
wide
carrier
tape:
2,000 parts per
13”
reel
.028
.122 DIA.
.072 DIA.
.140
.079 DIA.
.107 .120
.098 DIA.
.178 .192
.097 DIA.
.124
.140
.064 DIA.
.009
.068 DIA.
.009
.078 DIA.
.009
.088 DIA.
.009
0376
0376-0-XX-XX-07-XX-10-0
.030
.140 DIA.
.125 DIA.
Solder mount in
Ø
.133”
±
.003” PTH
#07
Contact for
Ø
.065” - .082” pins
Also available on
16mm
wide
carrier
tape:
1,500
parts per
13”
reel
0321
0321-0-XX-XX-08-XX-10-0
.030
.156 DIA.
3435
.072 DIA.
.064 DIA.
.061 DIA.
Solder mount in
Ø
.144”
±
.003” PTH
#08
Contact for
Ø
.084” - .102” pins
Also available on
16mm
wide
carrier
tape:
1,700
parts per
13”
reel
3435-0-XX-XX-47-XX-04-0
Solder mount in
Ø
.046”
±
.003” PTH
#47
Contact for
Ø
.025” - .036” and
.025” square pins
.030
.088
.130
.210
.156 .181
.136 DIA.
.143 .165
.043 DIA.
.107 DIA.
.018
.122 DIA.
.018
.036 DIA.
.009
SPECIFICATIONS:
Shell Material:
Brass Alloy 360,
1/2
Hard
Contact Material:
Beryllium Copper Alloy
172,
HT
Solder Barrier:
Organic Fibre Plug
®
Dimensions: Inches
Tolerances On:
Lengths:
±
.005
Diameters: ±
.002
Angles:
±
2
°
RoHS - 2
2011/65/EU
ORDER CODE: XXXX - 0 - XX - XX -
XX
- XX - XX - 0
BASIC PART #
SPECIFY CONTACT FINISH:
SPECIFY PACKAGING:
27
30 ”
GOLD
OVER
NICKEL
(RoHS)
43
Discrete
Receptacles
02
100
”
TIN/LEAD
OVER
NICKEL
67
Supplied on
13”
Reels
84
200 ”
TIN
OVER
NICKEL
(RoHS)
SPECIFY SHELL FINISH:
01
200 ”
TIN/LEAD
OVER
NICKEL
80
200 ”
TIN
OVER
NICKEL
(RoHS)
CONTACT:
#02, #07, #08, #15, #16, #18, #23, #34 or #47
CONTACT (DATA ON PAGES 254 - 262)
PAGE 197 | PIN RECEPTACLES
京公网安备 11010802033920号
EEWORLD
