I'm working on the virtual serial port of stm32 recently. I downloaded the program to the chip, but after running it, it prompts that the USB device cannot be recognized. I know this is because the dr...
A Sine Wave Inverter Based on Sliding Mode ControlAbstract: A new sine wave inverter based on sliding mode control is proposed. The inverter adopts two sets of symmetrical Buck circuits and takes adva...
He Xiaoqing I recently attended the 2010 China Internet of Things Conference held by the China Electronics Society. It was an unprecedented event. The Internet of Things is developing rapidly in Chi...
When I first started learning STM32, I was always worried about where the various library files were. After various debugging, I collected all the libraries used under KEIL and now I have no problem u...
Please help, what are the advantages of using msp430 compared to 51 or stm32? I also want to use some sensors such as temperature, pressure or tension to start working and timing when a person puts on...
In recent years, as energy consumption and environmental protection issues have attracted people's attention, my country's solar photovoltaic power generation industry has shown a rapid development...[Details]
When talking about Chinese chips, Ni Guangnan is indispensable. Let’s learn more about the relevant content with the embedded editor.
Since he co-founded Lenovo in 1985, Ni Guangnan has been s...[Details]
Profit growth of 85% in 2017, target revenue of 12.5 billion yuan in 2018: The company released its 2017 annual report, achieving revenue of 8.886 billion yuan, a year-on-year increase of 48.01%; prof...[Details]
China Energy Storage Network News:
According to reports, in order to reduce carbon emissions, a group of Japanese technology and energy companies are launching a pilot project that aims to al...[Details]
Serial Port: 一. USART_ITConfig(USART1, USART_IT_TXE, ENABLE): As long as the transmit register is empty, there will always be an interrupt. Therefore, if you are not sending data, turn off the tran...[Details]
Different from 51, AVR and other single-chip microcomputers, the clock signal sources of msp430 include LFXT1, XT2 and DCO. 1. LFXT1: It can connect high-speed and low-speed crystal oscillators. In l...[Details]
In the project, CPLD is needed to complete part of the algorithm design. The parameters are given by AVR, so the communication between AVR and CPLD needs to be completed. Therefore, a test program is...[Details]
From small households to large enterprises, energy consumption has always been a concern for everyone. The energy consumption of Chinese enterprises has always been high, and the country has also wor...[Details]
As photovoltaic power stations come into people's view, people are paying more and more attention to them. Recently, some netizens asked me how to match the inverter and components of photovoltaic ...[Details]
At the beginning, I used the stdlib library. Recently, I found that the cube library is more and more widely used, so I started to use the cube library to complete the ADC multi-channel acquisition e...[Details]
I encountered a problem when debugging the STM32 system clock setting: TIM2 timing 1Ms, TIM2 interrupt service function time++, LED state changes when time=100. After the program runs, I found that t...[Details]
1. What is PWM What is PWM? Professionally speaking, it is pulse width modulation. In layman's terms, it is the continuous output of high and low levels. For example, the microcontroller outputs...[Details]
;Question: The 80C51 single-chip microcomputer has a fosc = 6MHz. It is required to use the T1 timer working mode 1 to perform a timing of 40ms. And P1.7 periodically outputs a rectangular wave with ...[Details]
Microcontroller programming: Find the maximum number and store it in the BIG unit. Assume that the internal RAM stores a group of unsigned numbers starting from the LIST unit, with the number of data...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
