MLV1206E3
www.vishay.com
Vishay BCcomponents
SMD 1206 Multilayer Varistor
FEATURES
• Surface mount multilayer surge suppressor
• Inherent bidirectional clamping
• Excellent energy/volume ratio
• Suitable for reflow soldering
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Over-voltage and transient voltage protection:
• Data lines and I/O port protection
• Protection against ESD transients
QUICK REFERENCE DATA
PARAMETER
Maximum continuous voltage
DC
AC
Maximum clamping voltage
at 1 A
Capacitance range
(at 1 kHz)
Maximum energy
(10/1000 μs)
Maximum peak current
(8/20 μs)
Operating temperature range
Weight
5.6 to 65.0
4.0 to 45.0
22.0 to 135.0
240 to 1500
0.5 to 1.1
100 to 200
-55 to 85
± 0.025
V
V
V
pF
VALUE
UNIT
• On-board protection of IC’s and transistors
• Modem protection
• LCD protection
DESCRIPTION
Size 1206 (M3216) multilayer chip varistor with NiSn
terminations.
PACKAGING
J
A
°C
g
Available in 8 mm embossed carrier tape, component pitch
4 mm on 180 mm reels containing 3000 pieces.
ELECTRICAL DATA AND ORDERING INFORMATION
WORKING VOLTAGE
V
RMS
V
4.0
11.0
14.0
20.0
25.0
30.0
35.0
40.0
45.0
V
DC
V
< 50 μA
5.6
14.0
18.0
26.0
30.0
38.0
45.0
56.0
65.0
BREAKDOWN
VOLTAGE
V
b
V
1 mA
7.0 to 10.0
16.2 to 19.8
21.6 to 26.0
31.0 to 38.0
37.0 to 46.0
42.3 to 51.7
50.4 to 61.6
61.0 to 77.0
73.8 to 90.2
CLAMPING
VOLTAGE
V
C
V
1 A, 8/20 μs
22.0
37.0
48.0
62.0
73.0
88.0
95.0
120.0
135.0
MAX. PEAK
CURRENT
I
p
A
8/20 μs
150
200
200
200
200
200
180
180
100
MAXIMUM
ENERGY
E
t
J
10/1000 μs
1.0
0.5
1.0
1.0
1.0
1.1
0.8
1.0
0.6
CAPACITANCE PART NUMBER
C
pF
1 kHz
3000
800
1300
900
550
500
550
380
240
0403T
1103T
1403T
2003T
2503T
3003T
3503T
4003T
4503T
SAP
MLV1206E3
Notes
• Sinusoidal voltage assumed as normal operating condition.
If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection.
• Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1.
• Parts are not recommended for automotive applications.
Revision: 30-Apr-15
Document Number: 29126
1
For technical questions, contact:
nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
