Premium Female/Female Jumper Wires - 20
x 3" (75mm)
PRODUCT ID: 1951
Description
These female-female premium jumper wires are handy for making wire harnesses or jumpering between
headers on PCB's. They're 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow
colors). They have 0.1" female header contacts on either end and fit cleanly next to each other on standard-
pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin ribbon cable. You can always pull the
ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire
harnesses.
We have tons of different Jumper Wires available, in all shapes and sizes!
Note:
The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these into a male header, have the sides with the 'silver latch bit' sticking
out since that side is a tiny bit wider than 0.1".