TMM-136-01-F-S-RE

In the war without gunpowder between China and the United States, ZTE has become a new victim. The seven-year chip ban by the United States has pushed this communications giant to a life-or...[Details]

1. Purpose         In actual product release, if the program stored in the MCU Flash is not protected, some illegal companies may read the program in the Flash through an emulator (J-Link, ST-Link, e...[Details]

Chip: STM32F107VCT6 Application Pin: THOUSANDS, RMII STM32CubeMX is very convenient to use ETH. The software comes with LWIP and configuration. This time, STM32F107VCT6+DP83848CVV is used. The MII a...[Details]

Serial Port:   一. USART_ITConfig(USART1, USART_IT_TXE, ENABLE): As long as the transmit register is empty, there will always be an interrupt. Therefore, if you are not sending data, turn off the tran...[Details]

China Energy Storage Network News: The State Grid Corporation of China, this elephant, is planning to turn around and enter the emerging power service market. The rallying cry for the tr...[Details]

The photovoltaic inverter is the core equipment of the photovoltaic system. Its main function is to convert the direct current generated by the photovoltaic modules into alternating current that meets...[Details]

　　Nowadays, everyone is saying that "technology is people-oriented". The essence of the development of technology is to serve the improvement of the quality of life of human beings. Automated driving...[Details]

In the project, CPLD is needed to complete part of the algorithm design. The parameters are given by AVR, so the communication between AVR and CPLD needs to be completed. Therefore, a test program is...[Details]

sprintf is a function in the C language library that converts data types. There is a situation where In 51 MCU, define unsigned char temp; Then I want to use the serial port to print out temp in deci...[Details]

Use the STM32 timer input capture module to control 3-way ultrasonic sensors. The  ultrasonic sensor used this time is the common HC-SR04, which is often used in the obstacle avoidance system of smal...[Details]

6MHz crystal oscillator, using timer counter 1, using interrupt mode, through P1.0 to make a light emitting diode turn on for 100ms, turn off for 300ms, and repeat. Assembly programming is used to ac...[Details]

Circuit: Using AT89S52 single chip microcomputer. P3.0 to P3.3 are connected to four external buttons. P3.4 to P3.7 are the bit selection ports for controlling the four digital tubes, and P1 is the s...[Details]

#include "MSP430x24x.h" void main(void) {         // Stop watchdog timer to prevent time out reset         WDTCTL = WDTPW + WDTHOLD; //Watchdog            P4DIR = BIT0|BIT1|BIT2|BIT3; //Set to outpu...[Details]

/********************************************************************** **                                                        ** File : EEPROM.c | Eeprom write and read |                         ...[Details]

1. The host sends a read /****************************************************************** **                                                        **  File : SPI.c     | Master Send |            ...[Details]