(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specifications before ordering. product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the approval sheet for
R50E13.pdf 04.6.11
Trimmer Potentiometers
SMD Open Type 2mm Size PVZ2 Series
2.1
∗2
0.5
2.4 Dia.
∗1
0.4
Soldering Part
0.5
1
s
Features
1. Ultra-small and thin external dimensions of
2.1(W)x2.7(L)x0.85 max. (T)mm.
(PVZ2A_A04 Series)
2. Au plated termination achieves a high density
P.C.B. mounting.
3. Cross-shaped driver slot allows for in-process
automatic adjustment and it provides superior
adjustability.
4. Two-piece parts construction achieves low cost and
excellent quality.
5. Special resin substrate allows high peak temperature
for reflow soldering.
0.45±0.1
0.8
#2
1
4
1.3
2.2
2.7±0.3
#1
#3
0.55 0.7 0.55
#2
#1
CLOCKWISE
#3
PVZ2A
∗1
Driver Plate Rotation Area :
Please do not place any components
more than 0.7mm in height within this area.
∗2
PVZ2A_A01 : 0.9±0.1
in mm
PVZ2A_A04 : 0.8±0.05
Tolerance :
±0.2
(
2.1
0.8
#2
(1.0)
0.9
-0.2
+0.1
s
Applications
1. Pick-up module
3. Cellular-phone
5. Pager
7. Digital camera
2. LCD
4. PHS
6. DVC
8. Portable audio, etc.
0.45±0.1
2.4 Dia.
*1
(1.0)
Soldering
Part
#1
#3
0.65 0.6 0.65
#2
#1
CLOCKWISE
#3
PVZ2K
∗1.
Driver Plate Rotation Area :
Please do not place any components
more than 0.7mm in height within this area.
1.3
2.2
5.4
mm
(
Tolerancein
±0.2
)
:
Part Number
PVZ2p501A01
PVZ2p102A01
PVZ2p202A01
PVZ2p302A01
PVZ2p502A01
PVZ2p103A01
PVZ2p203A01
PVZ2p303A01
PVZ2p503A01
PVZ2p104A01
PVZ2p204A01
PVZ2p304A01
PVZ2p504A01
PVZ2p105A01
PVZ2p501A04
PVZ2p102A04
PVZ2p202A04
PVZ2p302A04
PVZ2p502A04
PVZ2p103A04
PVZ2p203A04
PVZ2p303A04
PVZ2p503A04
PVZ2p104A04
PVZ2p204A04
Power Rating
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
Soldering Method
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Number of Turns
(Effective Rotation Angle)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
Total Resistance Value
500ohm
±30%
1k ohm
±30%
2k ohm
±30%
3k ohm
±30%
5k ohm
±30%
10k ohm
±30%
20k ohm
±30%
30k ohm
±30%
50k ohm
±30%
100k ohm
±30%
200k ohm
±30%
300k ohm
±30%
500k ohm
±30%
1M ohm
±30%
500ohm
±30%
1k ohm
±30%
2k ohm
±30%
3k ohm
±30%
5k ohm
±30%
10k ohm
±30%
20k ohm
±30%
30k ohm
±30%
50k ohm
±30%
100k ohm
±30%
200k ohm
±30%
TCR
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
Continued on the following page.
0.5
)
5
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specifications before ordering. product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the approval sheet for
R50E13.pdf 04.6.11
Continued from the preceding page.
1
Part Number
PVZ2p304A04
PVZ2p504A04
PVZ2p105A04
Power Rating
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
Soldering Method
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Number of Turns
(Effective Rotation Angle)
1(240°±10°)
1(240°±10°)
1(240°±10°)
Total Resistance Value
300k ohm
±30%
500k ohm
±30%
1M ohm
±30%
TCR
±500ppm/°C
±500ppm/°C
±500ppm/°C
The blank column is filled with the code of adjustment direction A (top) or K (rear).
s
Construction
PVZ2A
s
Standard Land Pattern
PVZ2A
0.9
0.85
0.6
0.7
0.6
0.85
1.55
1.55
mm
(
Tolerancein
±0.1
)
:
s
Construction
PVZ2K
#2-Terminal
s
Standard Land Pattern
PVZ2K
0.9
Driver Plate
2.9
0.7 0.6
#3-Terminal
Resin Substrate
0.7
mm
(
Tolerancein
±0.1
)
:
0.7
2.9
Resistive
Element
3.4 Dia.
#1-Terminal
Wiper
s
Characteristics
Humidity Exposure
High Temperature
Exposure
Humidity Load Life
Load Life
Temperature Cycle
Temperature Coefficient
of Resistance
Rotational Life
Res. Change : +10, -2%
Res. Change : R
<
50kohm···+2, -10%
=
50kohm<R···+2, -15%
Res. Change :
±10%
Res. Change : R
<
50kohm···+2, -10%
=
50kohm<R···+2, -15%
Res. Change :
±5%
±500ppm/˚C
Res. Change :
±10%
(10 cycles)
6
0.7
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specifications before ordering. product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the approval sheet for
R50E13.pdf 04.6.11
PVZ2 Series Notice
s
Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
1
s
Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
4. If the trimmer potentiometer is used in DC and high
humidity conditions, please connect wiper (#2) for
plus and resistive element (#1 or #3) for minus.
s
Notice (Soldering and Mounting)
1. Soldering
(1) Reflow soldering and Soldering Iron are
available. Cannot be soldered using the flow
soldering method. If you use the flow soldering
method, the trimmer potentiometer may not
function.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of the
surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(3) Standard soldering condition
(a) Reflow soldering :
Refer to the standard temperature profile.
(b) Soldering iron:
>Temperature of tip 360 deg. C max.
>Soldering time
3 sec. max.
>Diameter
1mm max.
>Wattage of iron 30W max.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer potentiometer may deviate from the
specified characteristics.
(4) Apply the appropriate amount of solder paste.
The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the
dimension of land pattern used should be Murata's
standard land pattern at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
(5) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
2. Mounting
(1) Do not apply excessive force (preferably 4.9N
(Ref.; 500gf) max.), when the trimmer
potentiometer is mounted to the PCB.
(2) Do not warp and/or bend PC board to prevent
trimmer potentiometer from breakage.
(3) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 1.5-1.8mm dia. and inner dimension
1.3mm dia.
3. Cleaning
(1) In case there is flux on the resistive element,
clean sufficiently with cleaning solvents and
completely remove all residual flux.
(2) Isopropyl-alcohol and Ethyl-alcohol are
Continued on the following page.
7
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specifications before ordering. product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the approval sheet for
R50E13.pdf 04.6.11
1
PVZ2 Series Notice
Continued from the preceding page.
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
performance by your product.
s
Reflow Soldering Standard Profile
For reflow soldering
Pre-heating (in the air)
230
Temperature (°C)
200
Soldering
Gradual Cooling
(in the air)
100
0
60-120 sec.
30 sec. max.
(Melting zone)
Time
s
Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
PVZ2A_A01=Murata P/N : KMDR090
PVZ2A_A04=Murata P/N : KMDR150
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
3. Please use within the effective rotational angle.
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
4. When using a lock paint to fix slot position,
please consult with a Murata factory representative
prior to using to prevent corrosion and contact
intermittence.
s
Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
8
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specifications before ordering. product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the approval sheet for
R50E13.pdf 04.6.11
SMD Open Type and Test Methods
Specifications and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods
The tests and measurements should be conducted under the condition of 15 to 35°C of temperature, 25 to 75% of relative humidity and 86 to 106 kpa of
atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned
conditions, the tests and measurements should be conducted under the condition of 25±2°C of temperature and, 45 to 55% of relative humidity and 86 to
106 kpa of atmospheric pressure.
No.
Item
Test Methods
Measure total resistance between the resistance element and terminals (terminals #1 and #3) with the contact arm
positioned against a stop. The positioning of the contact arm and terminal should be the same for subsequent total
resistance measurements on the same device.
Use the test voltage specified in Table-1 for total resistance measurements. This voltage should be used whenever a
subsequent total resistance measurement is made.
1
Total Resistance
Total Resistance,
Nominal (ohm)
10VRV100
100FRV1k
1kFRV10k
10kFRV100k
100kFR
Maximum Test
Voltage (V)
1.0
3.0
10.0
30.0
100.0
Table 1: Total resistance test voltage
Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance
between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-
wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-
minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not
exceeded.
Contact resistance variation should be measured with the measuring circuit shown below, or its equivalent. The
operating wiper should be rotated in both directions through 90% of the actual effective-electrical travel for a total of
6 cycles.
The rate of rotation of the operating wiper should be such that the wiper completes 1 count in determining whether or
not a contact resistance variation is observed at least twice in the same location. The test current should follow the
value given in Table-2 unless otherwise limited by the power rating.
3
Contact Resistance
Standard Total
Resistance R (ohm)
100VRF10k
10kVRF100k
100kVR
Test Current
10mA max.
1mA max.
100µA max.
Constant Current
Source
(Test current
shown in Table 2)
#1
Rx
#2
Proofread
Resistence
AC
Amplifier
#3
Oscilloscope
2
Residual Resistance
Table 2: Test current for CRV
Rx : Trimmer Potentiometer
Oscilloscope bandwidth :100Hz to 50kHz
Figure 1: CRV measuring circuit
4
Humidity Exposure
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 40±2°C and 90 - 95% without loading for 500±12 hours.
The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 70±2°C without loading for 500±12 hours. The resistance value should be
measured after keeping the potentiometer in a room for 1.5±1/6 hours.
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 40±2°C and 90 - 95% with loading the 1/2 rated voltage between #1 and
#2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12hours.
The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 70±2°C (50±2°C for PVZ) with loading the 1/2 rated voltage between #1
and #2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12 hours. The resistance value should be
measured after keeping the potentiometer in a room for 1.5±1/6 hours.
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be subjected to Table 3,Table 4 temperature for 5 cycles. The resistance value should be measured
after keeping the potentiometer in a room for 1.5±10 minutes.
The receiving part of c51 seems to freeze when receiving! The data I sent in the serial assistant is: ０２０００１０２ The node number is 2. When sending, the interface originally displayed is: １. Input start...
I have basically completed the USB Mass Storage project based on CY7C68001, but there may be data inconsistency errors when transferring files over 30M. Although it is rare, it has already shown that ...
"The proliferation of connected car devices and the proliferation of advanced in-car infotainment systems require more ports and higher power supplies," said David Briggs, senior director of Qorvo's P...
How can I solve this problem? I have this error *** WARNING L1: UNRESOLVED EXTERNAL SYMBOL SYMBOL: ?ISD?CORE MODULE: ISD51.obj (ISD51_CONFIGURATION) Please help me analyze it! I am just learning....
1. Introduction
RFID (radio frequency identification) is a non-contact automatic identification technology that emerged in the 1990s. It uses the characteristics of radio frequency signal prop...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
Electronic systems are located at different points on the automotive power bus and therefore often need to operate under very stringent power requirements. These include load dump, cold crank, very lo...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
1 Introduction
As an emerging microfabrication technology, micro-electromechanical system (MEMS) technology has begun to be applied in various fields. It can integrate functions such as inform...[Details]
AD8205 is
a single-supply high-performance differential
amplifier
launched by
Analog
Devices of the United States
. The typical single-supply voltage is 5V, and its common-mode volta...[Details]
1. Overview
The Virtual CAN Interface (VCI) function library is an application program interface specifically provided for the use of ZLGCAN devices on PCs. The functions in the library ar...[Details]
Product series: PB-B-RS232/485 interface (hereinafter sometimes referred to as "interface") is a product in the PROFIBUS bus bridge series.
The main purpose of the bridge series ...[Details]
1. Project Introduction
Shandong Dezhou Xingtai Paper Co., Ltd. is a newly built high-end paperboard production enterprise with domestic leading level established by Shandong Zhaodongfang Pape...[Details]
1. Introduction
Testing the temperature of steel billets before rolling is an important measure to ensure the quality of steel. Traditional manual testing is difficult to ensure product qu...[Details]
Flooded Batteries
This battery developed in Germany can be used to power flashlights, strobe lights and toys as long as it is filled with water. This battery can be stored for 50 years and can...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
Introduction
Liquid crystal, as a display device, is widely used in low-power products such as instruments, meters, and electronic equipment with its unique advantages. In the past, the displ...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
