Moisture Barrier Bag 3370
This aluminized moisture barrier bag is designed to provide
protection to moisture and ESD sensitive items including outside
an ESD protected area. The bags are heat sealable and suitable
for vacuum packaging. Bags are printed the ESD protective and
moisture sensitive symbols and a lot code for traceability.
SCS Moisture Barrier Bags 3370 are manufactured from a laminate
of multiple layers of aluminized polyester and polyethylene. Polyester
provides puncture resistance. Metalized layer provides shielding
of Electrostatic Discharge (ESD) and minimizes the penetration of
electrostatic and electric
Top Bag
Open
fields.
ZipTop Bag
Physical
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541,
and Static Control Bag ANSI/ESD S11.4 Level 3 (except transparency)
Typical Value
0.028 grams/100 sq. in./24 hrs
7800 PSI, 54 MPa
20 lbs, 89 N
16 lbs, 71 N
3.6 mils, 0.0036" +/-15%
Pass
Typical Value
<10 nJ
1 x 10
4
to < 1 x 10
11
ohms
1 x 10
4
to < 1 x 10
11
ohms
Typical Value
Not Detected
150 µg/cm
2
7.1 µg/cm
2
CL .025 µg/cm
2
Testing Method
MIL-STD-3010C Method 3030
Moisture Vapor
Transmission Rate (MVTR)
Tensile Strength
Puncture Resistance
Seal Strength
Thickness
Marking Adhesion
Electrical
ESD Shielding
ASTM D882
MIL-STD-3010 Method 2065
ASTM D882
MIL-STD-3010 Method 1003
IPC-TM-650 2.4.1
Testing Method
ANSI/ESD STM11.31
Surface Resistance - Interior
Surface Resistance - Exterior
Cleanliness
Silicone
Tolerance: Width -0, +1/4"
Length +/- 1/8" Offset 0 to 1/4"
Seal width 3/8" with a tolerance of +/- 1/8"
ANSI/ESD STM11.11
ANSI/ESD STM11.11
Testing Method
FTIR
Outgassing
NVR
DHS
Hexane Extract
IC (Anions)
IC of DI Water Extract
IC of DI Water Extract
IC of DI Water Extract
Note: Standard bag markings shown
above are not to scale.
NO3 0.16 µg/cm
2
S04 not detected
Heat Sealing Conditions
Temperature
Typical Value
400°F, 204°C
0.6 – 4.5 seconds
Time
Pressure
30 – 70 PSI, 206 – 482 KPa
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250
free of amines, silicones and heavy metals.
Bag is
Seal width +/- 0.125
This product is intended for commercial use only. This product is not on the Qualified Product Listing
under the Defense Standardization Program.
NOTE:
The complete dry package concept of packaging for electronics requires three elements:
Moisture Barrier Bags
- To Protect
Desiccants
- To Absorb Moisture
Humidity Indicator Cards
- To Monitor Performance
RoHS 3, REACH, and Conflict Minerals Statement
None of the RoHS 3 restricted materials or REACH substances of very high concern as
of 2017/07/07, or Conflict Minerals are intentionally added in manufacturing this product.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See
SCS Warranty, Limitation of Liability and Remedies
Specifications and procedures subject to change without notice.
Made in the
United States of America
3370 SERIES MOISTURE BARRIER BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE:
StaticControl.com
PHONE (919) 718-0000
DRAWING
NUMBER
3370 Series
DATE
October
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
Buy&Sell
京公网安备 11010802033920号
EEWORLD
