JN5169-001-M0x-2
ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules
Rev. 3.0 — 19 September 2016
Product data sheet
1. General description
The JN5169-001-M0x-2 (with x = 0, 3 or 6) module family provides designers with a
ready-made component that provides a fully integrated solution for applications, using the
IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM frequency band, including ZigBee
3.0 and ZigBee PRO stack with Home Automation, Light Link and Smart Energy profiles.
The modules integrate all of the RF components required, removing the need to perform
expensive RF design and test. Products can be designed by simply connecting sensors
and switches to the module IO pins. The modules use NXP’s single chip IEEE802.15.4
wireless microcontroller, allowing designers to make use of the extensive chip
development support material. Hence, this range of modules allows designers to bring
wireless applications to market in the minimum time with significantly reduced
development effort and cost.
3 variants are available: JN5169-001-M00-2, JN5169-001-M03-2 and
JN5169-001-M06-2. All modules have FCC modular approval. The JN5169-001-M00-2
and JN5169-001-M03-2 are also CE-compliant and subject to a Notified Body Opinion.
The variants available are described in the
Table 1.
1.1 Regulatory Approvals
The JN5169-001-M00-2 and JN5169-001-M03-2 have been tested against the
requirements of the following European standards.
•
Radio EN 300 328 v 1.9.1
•
EMC, EN 301 489-17 v 2.2.1, EN 62479 2010, EN 301 489-1 v 1.9.2
•
Basic Safety Assessment (BSA) EN 60950-1:2006
A Notified Body statement of opinion for this standard is available on request.
The High-power module with M06 suffix is not approved for use in Europe.
Additionally, both module types have received FCC “Modular Approval”, in compliance
with CFR 47 FCC part 15 regulations and in accordance to FCC public notice DA00-1407.
The modular approvals notice and test reports are available on request.
The JN5169-001-M06-2 module is subject to user proximity restrictions under FCC
regulations; more specific information is available in
Section 13.1.2.
NXP Semiconductors
JN5169-001-M0x-2
ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules
2. Features and benefits
2.1 Benefits
Microminiature module solutions
Ready to use in products
Minimizes product development time
No RF test required for systems
Compliant with:
FCC 47CFR Part 15C
ETSI EN 300-328 V1.9
EN 301-489-17 V2.2.1
EN60950-1-2006
Temperature range:
40 C
to +85
C
Lead-free and RoHS compliant
2.2 Features: modules
2.4 GHz IEEE 802.15.4, ZigBee 3.0 and ZigBee PRO stack with Home Automation,
Light Link and Smart Energy compatible
JN5169-001-M00-2
Dimensions: 16 mm
30 mm
Integrated printed antenna
TX power 8.5 dBm/10 dBm
Receiver sensitivity –96 dBm
TX current 27.2 mA at 10 dBm
TX current 23.6 mA at 8.5 dBm
RX current 17.8 mA at maximum input level 10 dBm
RX current 16.2 mA at maximum input level 0 dBm
2.0 V/3.6 V operation
JN5169-001-M03-2
Dimensions: 16 mm
21 mm
Fl
connector
TX power 8.5 dBm/10 dBm
Receiver sensitivity –96 dBm
TX current 27.2 mA at 10 dBm
TX current 23.6 mA at 8.5 dBm
RX current 17.8 mA at maximum input level 10 dBm
RX current 16.2 mA at maximum input level 0 dBm
2.0 V/3.6 V operation
JN5169-001-M06-2
Dimensions: 16 mm
30 mm
Fl
connector
TX power 22 dBm
Receiver sensitivity –100 dBm
TX current 181 mA at 22 dBm
JN5169M0x
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2016. All rights reserved.
Product data sheet
Rev. 3.0 — 19 September 2016
2 of 27
NXP Semiconductors
JN5169-001-M0x-2
ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules
RX current 22.8 mA at maximum input level 10 dBm
2.0 V/3.6 V operation
2.3 Features: microcontroller
32-bit RISC CPU; 1 MHz to 32 MHz clock speed
Variable instruction width for high coding efficiency
Multi-stage instruction pipeline
512 kB Flash
32 kB RAM
4 kB EEPROM
Data EEPROM with guaranteed 100 k write operations
2-wire I
2
C-bus compatible serial interface; can operate as either master or slave
5
PWM (4 timers, 1 timer/counter)
2 low-power sleep counters
2 UARTs
SPI-bus Master and Slave port, 3 selects
Supply voltage monitor with 8 programmable thresholds
6-input 10-bit ADC, comparator
Battery and temperature sensors
Watchdog and Supply Voltage Monitor (SVM)
Up to 20 Digital IO (DIO) pins
3. Applications
Robust and secure low-power wireless applications
ZigBee Smart Energy networks
ZigBee Home Automation networks
Toys and gaming peripherals
Energy harvesting - for example, self-powered light switch
4. Overview
The JN5169-001-M0x-2 family is a range of ultra-low power, high performance surface
mount modules targeted at IEEE 802.15.4, ZigBee 3.0 and ZigBee Home Automation,
Light Link and Smart Energy networking applications, enabling users to realize products
with minimum time to market and at the lowest cost. They remove the need for expensive
and lengthy development of custom RF board designs and test suites. The modules use
NXP’s JN5169 wireless microcontroller to provide a comprehensive solution with large
memory, high CPU and radio performance and all RF components included. All that is
required to develop and manufacture wireless control or sensing products is to connect a
power supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
3 module variants are available: JN5169-001-M00-2 with an integrated printed antenna,
JN5169-001-M03-2 and JN5169-001-M06-2 with a
FL
antenna connector. The
JN5169-001-M06-2 also has a power amplifier and LNA for extended range.
JN5169M0x
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2016. All rights reserved.
Product data sheet
Rev. 3.0 — 19 September 2016
3 of 27
NXP Semiconductors
JN5169-001-M0x-2
ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules
5. Ordering information
Table 1.
Ordering information
Description
Standard power, integrated printed antenna
Standard power,
FL
connector
High power,
FL
connector
FCCID
XXMJN5169M0V2
XXMJN5169M3V2
XXMJN5169M6V2
Type number
JN5169-001-M00-2
JN5169-001-M03-2
JN5169-001-M06-2
For further details, refer to the Wireless Connectivity area of the NXP web site
Ref. 3.
6. Marking
aaa-022822
(1) With x = 0, 3 or 6.
Fig 1.
Table 2.
Line 1
Line 2
Line 3
Line 4
JN5169-001-M0x-2 package marking (top view)
Marking code
Marking code
NXP Logo: B&W outline logo - 2D barcode (internal NXP usage)
part ID: JN5169-001-M0x-2, with x the module type, 0, 3 or 6
serial number: NNNNN
Line number
•
•
•
•
•
Z: SSMC
b: SPIL
H: halogen free
Y: year
WW: week code
Line 5
Line 6
FFC ID = FCCID: XXMJN5169MxV2, with x the module type 0, 3 or 6
IC ID = IC: 8764A-JN5169Mx, with x the module type 0, 3 or 6
JN5169M0x
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2016. All rights reserved.
Product data sheet
Rev. 3.0 — 19 September 2016
4 of 27
NXP Semiconductors
JN5169-001-M0x-2
ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules
JN5169-001-M0x-2 modules meet the requirements of Directive 2002/95/EC of the
European Parliament and of the Council on the Restriction of Hazardous Substance
(RoHS) and of the Chinese RoHS requirements SJ/T11363-2006 which came into force
on 1 March 2007.
7. Block diagram
integrated
antenna
MATCHING
M00 option
2.4 GHz
RADIO
INCLUDING
DIVERSITY
WATCHDOG
TIMER
VOLTAGE
BROWNOUT
O-QPSK
MODEM
RAM
32 kB
FLASH
512 kB
SPI-BUS
MASTER AND SLAVE
2-WIRE SERIAL
(MASTER/SLAVE)
4 X PWM
PLUS TIMER
2 X UART
20 DIO
PLUS 2 DO
SLEEP
COUNTER
6 CHAN
10 BIT ADC
BATTERY AND
TEMP SENSORS
external
antenna
µFL
CONNECTOR
32-BIT
RISC CPU
MATCHING
M03 option
4kB
EEPROM
IEEE802.15.4
MAC
ACCELERATOR
external
antenna
µFL
CONNECTOR
PA/LNA
SE2431
MATCHING
M06 option
XTAL
POWER
MANAGEMENT
128-BIT AES
ENCRYPTION
ACCELERATOR
JN5169
POWER
aaa-022823
Fig 2.
Block diagram
JN5169M0x
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2016. All rights reserved.
Product data sheet
Rev. 3.0 — 19 September 2016
5 of 27
京公网安备 11010802033920号
EEWORLD
