Standard Frequencies – see Page 5 for developed frequencies.
* Check with factory for availability of frequencies not listed.
pplications
utomotive Electronics
Mobile Multimedia/Infotainment
Car Navigation Systems
Internet of Things [IoT, IIot]
Microcontrollers and FPG s
Wireless Communication
Ethernet/GbE/SyncE
Medical Electronics
Commercial Military & erospace
Description
CTS Model S 5 2 incorporates a low cost, high Q, small size quartz resonator specifically developed to operate
over extended temperature ranges for use in automotive electronics.
Ordering Information
Model
S 5 2
Frequency Code
[MHz]
X X X or X X X X
Mode of
Oscillation
F
Tolerance
@ +25°C
Temperature
Stability
5
Temperature
Range
G
Load
Capacitance
Packaging
T
Code
Frequency
Product Frequency Code
1
Code
1
X
2
5
Tolerance
±10ppm
±15ppm
±20ppm
± 0ppm
±50ppm
Code
I
G
H
N
P
M
Stability
±15ppm
±20ppm
± 0ppm
Code
5
6
7
Temp. Range
2
-40°C to +85°C
-40°C to +105°C
4
-40°C to +125°C
-40°C to +150°C
5
5
-55°C to +105°C
-55°C to +125°C
5
Packing
Code
1k pcs./reel
T
Code
F
T
Mode
Fundamental
rd Overtone
Code
X
2
Stability
±50ppm
±100ppm
±150ppm
Code Capacitance Code Capacitance
7pF
16pF
V
C
8pF
18pF
K
D
9pF
20pF
J
E
10pF
24pF
F
12pF
0pF
L
G
1 pF
Series
B
S
Notes:
1]
2]
]
4]
5]
Refer to document 016-1454-0, Frequency Code Tables. -digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
vailable with all stability codes.
vailable with stability codes , 5, 6 and 7.
vailable with stability codes 5, 6 and 7.
Stability codes 6 and 7. Contact factory for code 5 availability.
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
[font=微软雅黑][size=2]Singles’ Day is over, and New Year’s Eve is not far away[/size][/font][font=微软雅黑][size=2] [/size][/font] [font=微软雅黑][size=2]Let’s review what excellent courses are offered by Univer...
[i=s]This post was last edited by ltbytyn on 2014-7-5 15:24[/i] I am very happy to get the [color=rgb(102, 102, 102)][font=Tahoma,][url=https://bbs.eeworld.com.cn/thread-441192-1-1.html]ZRtech[/url][/...
[i=s]This post was last edited by tvman101 on 2020-10-16 19:23[/i]Schematic diagram:This is a bandwidth amplifier circuit.
1. The cutoff frequency of the low-pass filter circuit R1C1 and R2C2 is the u...
The previous article introduced the cross-compilation of FFmpeg and how to run ffmpeg commands to play videos on the embedded Linux platform.
In this article, we will design an RTSP video player throu...
The company asked me to do technical research and development related to the stm8 microcontroller, and asked me to jump directly from the user code to the UBC (user startup code) mode without resettin...
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
As cellular phones become more advanced, the power consumption of the system during operation and the power consumption during standby are also increasing. Therefore, the power management design of...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
General LED lighting has a current limiting resistor in the driving circuit, and the power consumed by the resistor has nothing to do with the LED light emission. In order to improve efficiency, a...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
Introduction
As the country increases its efforts to control the atmospheric environment, motorcycle emission regulations will become stricter year by year, and motorcycles that do not meet the...[Details]
The invention of the steam engine ushered in the first conversion of internal energy and mechanical energy for mankind, and the birth of the internal combustion engine at the end of the 19th centur...[Details]
1 Introduction to LED
With the development of science and technology, people have higher and higher requirements on automobile light sources. LED (Light Emitting Diode) has gradually attracted...[Details]
The production process of lithium batteries does not mention the previous processes such as material preparation, winding, liquid injection, and packaging, but only talks about the final formation ...[Details]