Basic information of LT1013CJG amplifier:
LT1013CJG is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8
LT1013CJG amplifier core information:
The minimum operating temperature of the LT1013CJG is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.05 µA Its maximum average bias current is 0.03 µA
The manufacturer's maximum slew rate for the LT1013CJG is 2.4 mA, while the minimum slew rate is 0.2 V/us. Its minimum voltage gain is 500000. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT1013CJG gain becomes 0.707 times the low-frequency gain is 700 kHz.
The nominal supply voltage of the LT1013CJG is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: 5/+-15 V. The input offset voltage of the LT1013CJG is 300 µV (input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)
Related dimensions of LT1013CJG:
The width of LT1013CJG is: 7.62 mm and the length is 9.6 mm. LT1013CJG has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8
LT1013CJG amplifier additional information:
LT1013CJG adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of LT1013CJG is: YES. Its temperature grade is: COMMERCIAL. It is a micropower amplifier.
The LT1013CJG is not Rohs certified. The corresponding JESD-30 code is: R-GDIP-T8. The packaging code of LT1013CJG is: DIP. The materials used in the LT1013CJG package are mostly CERAMIC and GLASS-SEALED. The package shape is RECTANGULAR.
The LT1013CJG package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.
Basic information of LT1013CJG amplifier:
LT1013CJG is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8
LT1013CJG amplifier core information:
The minimum operating temperature of the LT1013CJG is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.05 µA Its maximum average bias current is 0.03 µA
The manufacturer's maximum slew rate for the LT1013CJG is 2.4 mA, while the minimum slew rate is 0.2 V/us. Its minimum voltage gain is 500000. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT1013CJG gain becomes 0.707 times the low-frequency gain is 700 kHz.
The nominal supply voltage of the LT1013CJG is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: 5/+-15 V. The input offset voltage of the LT1013CJG is 300 µV (input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)
Related dimensions of LT1013CJG:
The width of LT1013CJG is: 7.62 mm and the length is 9.6 mm. LT1013CJG has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8
LT1013CJG amplifier additional information:
LT1013CJG adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of LT1013CJG is: YES. Its temperature grade is: COMMERCIAL. It is a micropower amplifier.
The LT1013CJG is not Rohs certified. The corresponding JESD-30 code is: R-GDIP-T8. The packaging code of LT1013CJG is: DIP. The materials used in the LT1013CJG package are mostly CERAMIC and GLASS-SEALED. The package shape is RECTANGULAR.
The LT1013CJG package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.
| Parameter Name | Attribute value |
| Is it Rohs certified? | incompatible |
| Parts packaging code | DIP |
| package instruction | 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8 |
| Contacts | 8 |
| Reach Compliance Code | not_compliant |
| ECCN code | EAR99 |
| Is Samacsys | N |
| Amplifier type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Maximum average bias current (IIB) | 0.03 µA |
| Maximum bias current (IIB) at 25C | 0.05 µA |
| frequency compensation | YES |
| Maximum input offset voltage | 300 µV |
| JESD-30 code | R-GDIP-T8 |
| length | 9.6 mm |
| low-dissonance | YES |
| micropower | YES |
| Nominal Negative Supply Voltage (Vsup) | -15 V |
| Number of functions | 2 |
| Number of terminals | 8 |
| Maximum operating temperature | 70 °C |
| Minimum operating temperature | |
| Package body material | CERAMIC, GLASS-SEALED |
| encapsulated code | DIP |
| Encapsulate equivalent code | DIP8,.3 |
| Package shape | RECTANGULAR |
| Package form | IN-LINE |
| Peak Reflow Temperature (Celsius) | NOT SPECIFIED |
| power supply | 5/+-15 V |
| Certification status | Not Qualified |
| Maximum seat height | 5.08 mm |
| minimum slew rate | 0.2 V/us |
| Maximum slew rate | 2.4 mA |
| Supply voltage upper limit | 11 V |
| Nominal supply voltage (Vsup) | 15 V |
| surface mount | NO |
| technology | BIPOLAR |
| Temperature level | COMMERCIAL |
| Terminal form | THROUGH-HOLE |
| Terminal pitch | 2.54 mm |
| Terminal location | DUAL |
| Maximum time at peak reflow temperature | NOT SPECIFIED |
| Nominal Uniform Gain Bandwidth | 700 kHz |
| Minimum voltage gain | 500000 |
| width | 7.62 mm |
| Base Number Matches | 1 |
Embedded System
ADI Reference Circuit
Linux and Android
Microcontroller MCU
Power technology
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
