— Data can be continuously read from one bank while
executing erase/program functions in another bank.
— Zero latency between read and write operations
Multiple Bank architecture
— Four bank architectures available (refer to Table
2).
Boot Sectors
— Top and bottom boot sectors in the same device
— Any combination of sectors can be erased
Manufactured on 0.13 µm process technology
SecSi™ (Secured Silicon) Sector: Extra 256 Byte
sector
—
Factory locked and identifiable:
16 bytes available for
secure, random factory Electronic Serial Number;
verifiable as factory locked through autoselect
function.
—
Customer lockable:
One-time programmable only.
Once locked, data cannot be changed
Zero Power Operation
— Sophisticated power management circuits reduce
power consumed during inactive periods to nearly
zero.
Compatible with JEDEC standards
— Pinout and software compatible with single-power-
supply flash standard
Ultra low power consumption (typical values)
— 2 mA active read current at 1 MHz
— 10 mA active read current at 5 MHz
— 200 nA in standby or automatic sleep mode
Cycling Endurance: 1 million cycles per sector
typical
Data Retention: 20 years typical
ADVANCE INFORMATION
Software Features
Supports Common Flash Memory Interface (CFI)
Erase Suspend/Erase Resume
— Suspends erase operations to read data from, or
program data to, a sector that is not being erased,
then resumes the erase operation.
Data# Polling and Toggle Bits
— Provides a software method of detecting the status of
program or erase cycles
Unlock Bypass Program command
— Reduces overall programming time when issuing
multiple program command sequences
Hardware Features
Ready/Busy# output (RY/BY#)
— Hardware method for detecting program or erase
cycle completion
Hardware reset pin (RESET#)
— Hardware method of resetting the internal state
machine to the read mode
WP#/ACC input pin
— Write protect (WP#) function protects the two
outermost boot sectors regardless of sector protect
status
— Acceleration (ACC) function accelerates program
timing
Sector protection
— Hardware method to prevent any program or erase
operation within a sector
— Temporary Sector Unprotect allows changing data in
protected sectors in-system
Package options
48-pin TSOP
Performance Characteristics
High performance
— Access time as fast as 55 ns
— Program time: 4 µs/word typical using accelerated
programming function
Publication Number
S29JL032H
Revision
A
Amendment
0
Issue Date
May 21, 2004
This document contains information on a product under development at FASL LLC. The information is intended to help you evaluate this product. FASL LLC reserves the
right to change or discontinue work on this proposed product without notice.
A D V A N C E
I N F O R M A T I O N
General Description
The S29JL032H is a 32 megabit, 3.0 volt-only flash memory device, organized as
2,097,152 words of 16 bits each or 4,194,304 bytes of 8 bits each. Word mode
data appears on DQ15–DQ0; byte mode data appears on DQ7–DQ0. The device
is designed to be programmed in-system with the standard 3.0 volt V
CC
supply,
and can also be programmed in standard EPROM programmers.
The device is available with an access time of 55, 60, 70, or 90 ns and is offered
in a 48-pin TSOP package. Standard control pins—chip enable (CE#), write en-
able (WE#), and output enable (OE#)—control normal read and write operations,
and avoid bus contention issues.
The device requires only a
single 3.0 volt power supply
for both read and write
functions. Internally generated and regulated voltages are provided for the pro-
gram and erase operations.
Simultaneous Read/Write Operations with Zero Latency
The Simultaneous Read/Write architecture provides
simultaneous operation
by dividing the memory space into separate banks (see Table
2).
Sector ad-
dresses are fixed, system software can be used to form user-defined bank
groups.
During an Erase/Program operation, any of the non-busy banks may be read
from. Note that only two banks can operate simultaneously. The device can im-
prove overall system performance by allowing a host system to program or erase
in one bank, then immediately and simultaneously read from the other bank, with
zero latency. This releases the system from waiting for the completion of program
or erase operations.
The S29JL032H can be organized as both a top and bottom boot sector
configuration.
S29JL032H Features
The
SecSi™ (Secured Silicon) Sector
is an extra 256 byte sector capable of
being permanently locked by FASL or customers. The SecSi Customer Indicator
Bit (DQ6) is permanently set to 1 if the part has been customer locked, perma-
nently set to 0 if the part has been factory locked, and is 0 if customer lockable.
This way, customer lockable parts can never be used to replace a factory locked
part.
Factory locked parts provide several options. The SecSi Sector may store a se-
cure, random 16 byte ESN (Electronic Serial Number), customer code
(programmed through Spansion programming services), or both. Customer Lock-
able parts may utilize the SecSi Sector as bonus space, reading and writing like
any other flash sector, or may permanently lock their own code there.
DMS (Data Management Software)
allows systems to easily take advantage
of the advanced architecture of the simultaneous read/write product line by al-
lowing removal of EEPROM devices. DMS will also allow the system software to
be simplified, as it will perform all functions necessary to modify data in file struc-
tures, as opposed to single-byte modifications. To write or update a particular
piece of data (a phone number or configuration data, for example), the user only
needs to state which piece of data is to be updated, and where the updated data
is located in the system. This is an advantage compared to systems where user-
written software must keep track of the old data location, status, logical to phys-
ical translation of the data onto the Flash memory device (or memory devices),
2
S29JL032H
S29JL032HA0 May 21, 2004
A D V A N C E
I N F O R M A T I O N
and more. Using DMS, user-written software does not need to interface with the
Flash memory directly. Instead, the user's software accesses the Flash memory
by calling one of only six functions.
The device offers complete compatibility with the
JEDEC 42.4 sin-
gle-power-supply Flash command set standard.
Commands are written to
the command register using standard microprocessor write timings. Reading data
out of the device is similar to reading from other Flash or EPROM devices.
The host system can detect whether a program or erase operation is complete by
using the device
status bits:
RY/BY# pin, DQ7 (Data# Polling) and DQ6/DQ2
(toggle bits). After a program or erase cycle has been completed, the device au-
tomatically returns to the read mode.
The
sector erase architecture
allows memory sectors to be erased and repro-
grammed without affecting the data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low V
CC
detector that automat-
ically inhibits write operations during power transitions. The
hardware sector
protection
feature disables both program and erase operations in any combina-
tion of the sectors of memory. This can be achieved in-system or via
programming equipment.
The device offers two power-saving features. When addresses have been stable
for a specified amount of time, the device enters the
Switching frequency optimizationGenerally speaking, the higher the switching frequency, the smaller the size of the output filter components L and CO. Therefore, the size of the power supply can be re...
High-speed digital signals are determined by the edge speed of the signal. It is generally believed that a rise time less than 4 times the signal transmission delay can be considered a high-speed sign...
The GPIO interface can be configured in general input and output mode (software mode is GPIO mode) or (hardware mode is peripheral mode). The GPIO interface mode is configured in software mode and can...
Before porting, here is a picture of the effect. I was really happy when the development board displayed this picture for the first time, because it was my first time to use emwin. The porting process...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
1. Principle of displacement angle sensor
The angle sensor is used to detect angles. It has a hole in its body that fits the LEGO axle. When connected to the RCX, the angle sensor counts once ...[Details]
1 Introduction
There have been many studies on the detection and protection of power grid short circuit and line fault. The short circuit, overload and overvoltage protectors on the market have ...[Details]
VP2188 is a color STN LCD module produced by Jingdian Pengyuan. This module is a dot matrix transmissive color STN display screen with a color scale of 65 k colors and white LED backlight. Its core...[Details]
Single-chip microcomputers are widely used because of their small size, powerful functions and low price. This article introduces the method of designing a micro electronic piano using the AT89C51 sin...[Details]
OC faults may be the most frequent and the most frequent of all faults in the inverter. They alarm during the startup process, during the shutdown process, during operation, and even when powered o...[Details]
Corelink Semiconductor has launched the CL1100-based 5-7W E27 LED lighting driver system solution DB2. This driver module meets the requirements of small size (L×W×H=5.1cm×2.1cm×1.8cm), low standby...[Details]
Preface
In recent years, white light LEDs have gradually replaced incandescent bulbs and fluorescent lamps because they have unparalleled advantages over traditional light sources in terms...[Details]
0 Introduction
With the rapid development of social economy and science and technology, electric locomotives, subways and electric vehicles will be widely used. The power conversion and cont...[Details]
With the rapid development of the national economy, lifting and hoisting operations are used more and more frequently and widely in various fields of economic construction. China has continuously expl...[Details]
Currently, high-frequency and high-efficiency DCDC converters are increasingly used in automotive electronic systems.
High switching frequency can use smaller power inductors and output filter...[Details]
IntroductionLED
billboards are a kind of information display terminal for the public, which has a wide range of civil and commercial values. However, the information displayed on most LED bil...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
