EEWORLDEEWORLDEEWORLD

Part Number

Search

B4CABCFREQ3

Description
Parallel - Fundamental Quartz Crystal, 26MHz Min, 32MHz Max, ROHS COMPLIANT, MINIATURE, SMD, 4 PIN
CategoryPassive components    Crystal/resonator   
File Size207KB,4 Pages
ManufacturerBliley Technologies Inc
Environmental Compliance  
Download Datasheet Parametric View All

B4CABCFREQ3 Overview

Parallel - Fundamental Quartz Crystal, 26MHz Min, 32MHz Max, ROHS COMPLIANT, MINIATURE, SMD, 4 PIN

B4CABCFREQ3 Parametric

Parameter NameAttribute value
Is it lead-free?Lead free
Is it Rohs certified?conform to
package instructionROHS COMPLIANT, MINIATURE, SMD, 4 PIN
Reach Compliance Codeunknown
Other featuresAT STRIP CRYSTAL
Ageing2 PPM/YEAR
Crystal/Resonator TypePARALLEL - FUNDAMENTAL
Drive level300 µW
frequency stability0.001%
frequency tolerance20 ppm
load capacitance12 pF
Installation featuresSURFACE MOUNT
Maximum operating frequency32 MHz
Minimum operating frequency26 MHz
Maximum operating temperature85 °C
Minimum operating temperature-40 °C
physical sizeL4.0XB2.5XH0.75 (mm)/L0.157XB0.098XH0.03 (inch)
Series resistance50 Ω
surface mountYES
Base Number Matches1
4.0 mm X 2.5 mm B4 series Crystal
Description
Miniature surface mount AT-
strip crystal optimized for
cellular handsets and blue
tooth applications. Standard
frequencies available for
Bluetooth chip sets.
Features:
Available in frequencies from 12
MHz to 32 MHz in the
fundamental mode
+/- 10 ppm available over temp.
Very compact and thin
Shock resistant
Designed for high-temp reflow
RoHS compliant
Frequency Range, Operating Temperature, and Frequency Stability:
Frequency Range
Operating
Temperature
-10 to +60°C
-20 to +70°C
-40 to +85°C
Product
Code
A
B
C
Temperature
Stability
+/- 10 ppm
+/- 20 ppm
+/- 30 ppm
+/- 50 ppm
+/-100 ppm
Product
Code
A
B
C
D
E
Frequency at
room
+/- 10 ppm
+/- 20 ppm
+/- 30 ppm
+/- 50 ppm
+/-100 ppm
Product
Code
A
B
C
D
E
12 MHz to 32
MHz
** Note: Not all combinations of temperature range, temperature stability, and frequency at room temperature
are available.
Aging ( at 25C ):
Frequency
All
Timeframe
Per Year
Aging
+/- 2.0 ppm
Crystal Electrical Parameters:
Effective Series Resistance:
Frequency Range ( MHz )
ESR ( Max )
12MHz to 19.999MHz
80 ohms
20MHz to 25.999MHz
70 ohms
>26MHz
50 ohms
Operating Capacitive Load:
Cload ( pF )
8.0
10.0
12.0
Product Code
A
B
C
Co and Drive Level:
Co ( pF ) Drive Level ( uW )
3.0 max.
300 max
www.bliley.com
2545 West Grandview Blvd Erie, PA. 16506
Page 1 of 4
Tel
(814) 838-3571
Rev 1.2
How to achieve over-damping control of constant temperature heating system, that is, the closer the temperature is to the set temperature, the slower the heating speed
Hello everyone, I want to make a constant temperature heating system. Using a single chip microcomputer to control a relay or a metal sheet temperature control switch can easily achieve the opening an...
flashtt Power technology
MSP430 external interrupt problem
I want to use external interrupt to detect whether the serial port has received data, but I checked the data sheet and found that the external interrupt can only be set to either rising edge or fallin...
两个人的烟火 Microcontroller MCU
View documentation in the micropython REPL online environment
I saw someone else write micropython offline documentation. Here are some other ways to view the documentation. First, download the micropython pdf document. It is about 200 pages. Second, use the onl...
allankliu MicroPython Open Source section
Find someone to attend the Embedded Linux training class (for a 10% discount)
Looking for someone to attend the Embedded Linux training class together (for a 10% discount) I used to work on MCU development and Bluetooth product development, and now I want to sign up for an Embe...
yyb0034 Linux and Android
Questions about dot matrix LCD display modules and character LCD display modules
What are the disadvantages of these two display modules? When should I use which module? What is the price difference?...
lzg123456 Embedded System
Weird problem with CCS 3.3 for OMAPL137
Today I wrote a piece of boot code. After initializing the various stacks in the working state, I encountered the following problem when establishing the interrupt vector table: The code is as follows...
huhuashen Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 536  1532  2667  2426  983  11  31  54  49  20 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号