NMA 2500 S
ERIES
D
UAL
B
IAS
N
OISE
M
ODULES
10 MH
Z TO
8.5 GH
Z
5V and 12V Bias
D
ESCRIPTION
REV
6.2008
NMA 2500 M
ODULES
MODEL
NMA2510
NMA2511
NMA2512
NMA2513
NMA2514
NMA2515
NMA2516
NMA2517
FREQUENCY
10MHz - 1.0GHz
10MHz - 1.5GHz
10MHz - 2.0GHz
10MHz - 4.0GHz
100MHz - 6.0GHz
30MHz - 3.0GHz
7.8GHz - 8.5GHz
2.0GHz - 8.0GHz
The NMA 2500 Dual Bias Noise
Module is a compact high power
noise source ideal for appliations
in jamming, dithering, built-in test
and calibration. The dual bias
voltage allows for greater flexibitli-
ty in system integration and lower
power consumption. The NMA
2500 is packaged in a sealed
housing for ease of integration
into a wide range of military and
commerical applications.
RF SPECIFICATIONS BY MODEL NUMBER
NOISE OUTPUT LEVEL
FLATNESS
*
(window)
dBm/BAND
(min)
dBm/Hz
(min)
ENR(dB)
(min)
S
PECIFICATIONS
84.0
82.2
81.0
78.0**
74.0
78.0
74.0
74.0
■
Operating Temperature:
-30 to +85
o
C
■
Storage Temperature:
-65 to +95
o
C
■
Supply Voltage: Dual Bias
+5.0 V Bias
- Voltage Range: +/- 3%
- Current Draw @ 300 mA max
+12 V Bias
- Voltage Range: +11.8 to 18.0 V
- Current Draw @ 25 mA max
■
Output Impedance: 50 ohm
■
Peak Factor: 5:1
specifications subject to change based
on technological advances
2.0dB
2.0dB
3.0dB
4.0dB
4.0dB
3.0dB
2.0dB
4.0dB
0
0
0
0
-3
-1
-11
-2
-90.0
-91.8
-93.0
-96.0
-100.0
-96.0
-100.0
-100.0
* Flatness is defined as the decibel ratio of the highest amplitude peak minus the lowest
across the frequency band.
**90 mA max.
P
ERFORMANCE
T
EST
D
ATA
Each unit ships standard with a spectrum analyzer plot of the noise output.
Upon special request, Micronetics can supply tabular data in text file format on CD-
ROM or floppy disk. The data points consist of power spectral density at discrete
frequency points across the frequency band.
A
PPLICATIONS
■
Frequency response built-in-test
(BIT) for communication receivers
■
Antenna/RF front end testing
■
70/140 MHz & L-Band modem
BER testing
■
Noise and interference simulation
■
Jamming / jamming simulation
■
Power distribution calibration of
multiple receiver systems
U
SEFUL
N
OISE
C
ONVERSIONS
0 dB ENR = -174 dBm/Hz
Power (dBm) = N0 +10
log
(BW)
where:
N0 = Noise spectral density in dBm/Hz
BW = Bandwidth in Hz
(equ 1)
(equ 2)
HOW TO ORDER
NMA-25XX-XX
Option
1 = Stnd
2 = TTL*
I
NSTALLATION
N
OTES
(1) Should be mounted to a thermally conductive baseplate
(2) Select style code T for mechanical clearance of
mating SMA (m) connector nut with respect to
thermally conductive baseplate
(3) Warning: when using a narrow band filter following the
noise module, use a 3 dB or reater pad to prevent
damage caused by refective power.
Package
S=Pkg Style S
*
T=Pkg Style T
* “1” noise on (internal pull-up)
“0” noise off
MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987
WEB: WWW.MICRONETICS.COM
京公网安备 11010802033920号
EEWORLD
