SR02 & S2 (Published)
Page 1 of 5
Precision Resistor Networks
SR02
& S2 Series
Description
The
SR02
& S2 Series resistor networks are precision-class metal film components featuring tight resistance
tolerance and low values of temperature coefficient of resistance (TCR). This resistor network package
provides both excellent resistance ratio and TCR tracking.
Electrical
Parameter
Resistance range
Resistance ratio
tolerance:
Power rating per
package
Operating
temperature
Storage temperature
Power Derating Curve
Tolerance Table
Resistance Value
Range
10Ω - <20Ω
20Ω - <100Ω
100Ω -<15KΩ
SR02
& S2 series
10Ω - 30KΩ
(See Tolerance Table below
for further details)
±0.02% (Q)
±0.05% (A)
0.70 watts @125°C
(refer to derating curve)
- 40 to +175°C
- 55 to +125°C
Abs.
Resistance
Tolerance
Available
±0.05% (A)
±0.10% (B)
±0.02% (Q)
±0.05% (A)
±0.10% (B)
±0.01% (T)
±0.02% (Q)
±0.05% (A)
±0.10% (B)
±0.01% (T)
±0.02% (Q)
±0.05% (A)
±0.10% (B)
Absolute TCR TCR Tracking
Tolerance
(ppm.°C)
(refer to note
Available
1& 2)
±25 ppm/°C
±5 (M)
(E)
±25 ppm/°C(E)
±2 (R)
±5 (M)
±5 ppm/°C (M)
±1 (X)
±2 (R)
±10 ppm/°C
±5 (M)
(Y)
±25 ppm/°C
(E)
±10 ppm/°C
±2 (R)
(Y)
±5 (M)
±25 ppm/°C
(E)
Note 1:
Ratio values greater
than 50:1 only available in ±5
ppm/°C TCR tracking
tolerance
Note 2 :
±1ppm/°C TCR
tracking only available for
identical resistance values.
15KΩ - Max
Mechanical
http://www.thin-film.com/web/tft.nsf/41acb363040f5be585256a7b001dcc4c/b48916af35... 10/23/2007
SR02 & S2 (Published)
Page 2 of 5
Marking
For Leaded Products (63Sn / 37 Pb
Terminals):
Marking shall be on the top (pattern) side of
the product and shall include:
The four digit series number
The TFT "Don't Stop" logo
A one digit monthly date code
The four digit resistance codes (XXXX/XXXX)
A pin one identifier
For Lead Free Products (100% Sn
Terminals):
Marking shall be on the top (pattern) side of
the product and shall include:
The two digit series number
The absolute resistance tolerance
The resistance tracking tolerance
The TFT "Don't Stop" logo
A one digit monthly date code
The four digit resistance codes (XXXX/XXXX)
A pin one identifier
Land Pattern
http://www.thin-film.com/web/tft.nsf/41acb363040f5be585256a7b001dcc4c/b48916af35... 10/23/2007
SR02 & S2 (Published)
Page 3 of 5
Packaging
http://www.thin-film.com/web/tft.nsf/41acb363040f5be585256a7b001dcc4c/b48916af35... 10/23/2007
SR02 & S2 (Published)
Page 4 of 5
Additional Comments:
All taping done in accordance with EIA 481 standards
Pieces taped with the green ( Marking )side up and showing through cover tape. The pin "1" identifier is
locate in the corner on the end of the piece closest to the sprocket hole in the carrier tape
Labels will contain the TFT part number and quantity of pieces taped
Carrier Tape - Part # CT00446-G-A0116
Part Number
For Leaded Products (63Sn / 37Pb Terminal Finish):
Form
Absolute
Factor Resistance
Tolerance
SR02
T = 0.01%
Q = 0.02%
A = 0.05%
B = 0.10%
C = 0.25%
D = 0.50%
F = 1.00%
Resistance
Ratio
Tolerance
Q = 0.02%
A = 0.05%
B = 0.10%
C = 0.25%
D = 0.50%
Z = NONE
Resistance Value
Absolute
TCR
Tolerance
(see note 4)
TCR
Tracking
Tolerance
(see note 2,3)
Packaging
(Tape and
Reel)
1 = 100
5 = 500
A = 1000
XXXX / XXXX
R1 Value R2 Value
The first 3 digits are
significant figures. The
last digit specifies the
number of zeros. For
values <100 ohms, R is
used to designate the
decimal position.
Multiple values are
separated by a slash (/).
e.g: 1001 = 1KΩ
75R0 = 75Ω
1001/1002 = 1KΩ/10KΩ
Y = 10 PPM/° X = 1 PPM/°C
R = 2 PPM/°C
C
E = 25 PPM/° M = 5 PPM/°C
C
For Lead Free Products (100% Sn Terminal Finish):
Form
Absolute
Factor Resistance
Tolerance
S2
T = 0.01%
Q = 0.02%
A = 0.05%
B = 0.10%
C = 0.25%
D = 0.50%
F = 1.00%
Resistance
Ratio
Tolerance
Q = 0.02%
A = 0.05%
B = 0.10%
C = 0.25%
D = 0.50%
Z = NONE
Resistance Value
Absolute
TCR
Tolerance
(see note 4)
TCR
Tracking
Tolerance
(see note 2,3)
Packaging
(Tape and
Reel)
1 = 100
5 = 500
A = 1000
XXXX / XXXX
R1 Value R2 Value
The first 3 digits are
significant figures. The
last digit specifies the
number of zeros. For
values <100 ohms, R is
Y = 10 PPM/° X = 1 PPM/°C
R = 2 PPM/°C
C
E = 25 PPM/° M = 5 PPM/°
C
C
http://www.thin-film.com/web/tft.nsf/41acb363040f5be585256a7b001dcc4c/b48916af35... 10/23/2007
SR02 & S2 (Published)
Page 5 of 5
used to designate the
decimal position.
Multiple values are
separated by a slash (/).
e.g: 1001 = 1KΩ
75R0 = 75Ω
1001/1002 = 1KΩ/10KΩ
Note 1: Refer to tolerance table above.
Note 2: 1 ppm/°C TCR tracking available only with identical resistances.
Note 3: Ratio values greater than 50:1 only available in ± 5 PPM/°C TCR tracking tolerance.
Note 4: Consult factory for ± 5 PPM/°C absolute TCR availability.
Examples:
SR02TQ1001/2001YRA
=
SR02
package, ±0.01% absolute resistance, ±0.02% resistance ratio, 1KΩ/2KΩ, ±10
absolute TCR, ±2 ppm/°C TCR tracking, 1000 piece tape and reel
S2QQ50R0/1001EM5-C
= S2 package, ±0.02% absolute resistance, ±0.02% resistance ratio, 50Ω/1KΩ, ±25 pp
TCR, ±5 ppm/°C TCR tracking, 500 piece tape and reel, lead free designator
1980 Commerce Drive, North Mankato, MN. 56001 (507) 625-8445
http://www.thin-film.com/web/tft.nsf/41acb363040f5be585256a7b001dcc4c/b48916af35... 10/23/2007
stm32/stm8
京公网安备 11010802033920号
EEWORLD
