TC1303A-NA2EUN datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Power/power management> The power supply circuit> TC1303A-NA2EUN

TC1303A-NA2EUN: Description0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10, PLASTIC, MO-187, MSOP-10; CategoryPower/power management The power supply circuit; File Size757KB，38 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

TC1303A-NA2EUN Overview

0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10, PLASTIC, MO-187, MSOP-10

TC1303A-NA2EUN Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	TSSOP
package instruction	TSSOP,
Contacts	10
Reach Compliance Code	compliant
ECCN code	EAR99
Other features	AUTOMATIC PWM TO PFM MODE
Analog Integrated Circuits - Other Types	SWITCHING REGULATOR
control mode	CURRENT-MODE
Control Technology	PULSE WIDTH MODULATION
Maximum input voltage	5.5 V
Minimum input voltage	2.7 V
Nominal input voltage	3.6 V
JESD-30 code	S-PDSO-G10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Maximum output current	0.5 A
Package body material	PLASTIC/EPOXY
encapsulated code	TSSOP
Package shape	SQUARE
Package form	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	1.1 mm
surface mount	YES
Switch configuration	BUCK
Maximum switching frequency	2400 kHz
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	3 mm

Preview

Download Datasheet

View All

TC1303A/TC1303B/

TC1303C/TC1304

500 mA Synchronous Buck Regulator,

+ 300 mA LDO with Power-Good Output

Features

• Dual-Output Regulator (500 mA Buck Regulator

and 300 mA Low-Dropout Regulator)

• Power-Good Output with 300 ms Delay

• Total Device Quiescent Current = 65 µA, Typical

• Independent Shutdown for Buck and LDO

Outputs (TC1303)

• Both Outputs Internally Compensated

• Synchronous Buck Regulator:

- Over 90% Typical Efficiency

- 2.0 MHz Fixed-Frequency PWM

(Heavy Load)

- Low Output Noise

- Automatic PWM to PFM mode transition

- Adjustable (0.8V to 4.5V) and Standard

Fixed-Output Voltages (0.8V, 1.2V, 1.5V,

1.8V, 2.5V, 3.3V)

• Low-Dropout Regulator:

- Low-Dropout Voltage = 137 mV Typical @

200 mA

- Standard Fixed-Output Voltages

(1.5V, 1.8V, 2.5V, 3.3V)

• Power-Good Function:

- Monitors Buck Output Function (TC1303A)

- Monitors LDO Output Function (TC1303B)

- Monitors Both Buck and LDO Output

Functions (TC1303C

and TC1304)

- 300 ms Delay Used for Processor Reset

• Sequenced Startup and Shutdown (TC1304)

• Small 10-pin 3x3 DFN or MSOP Package Options

• Operating Junction Temperature Range:

- -40°C to +125°C

• Undervoltage Lockout (UVLO)

• Output Short Circuit Protection

• Overtemperature Protection

Description

The

TC1303/TC1304

combines

500 mA

synchronous buck regulator and 300 mA Low-Dropout

Regulator (LDO) with a power-good monitor to provide

a highly integrated solution for devices that require

multiple supply voltages. The unique combination of an

integrated buck switching regulator and low-dropout

linear regulator provides the lowest system cost for

dual-output voltage applications that require one lower

processor core voltage and one higher bias voltage.

The 500 mA synchronous buck regulator switches at a

fixed frequency of 2.0 MHz when the load is heavy,

providing a low noise, small-size solution. When the

load on the buck output is reduced to light levels, it

changes operation to a Pulse Frequency Modulation

(PFM) mode to minimize quiescent current draw from

the battery. No intervention is necessary for smooth

transition from one mode to another.

The LDO provides a 300 mA auxiliary output that

requires a single 1 µF ceramic output capacitor,

minimizing board area and cost. The typical dropout

voltage for the LDO output is 137 mV for a 200 mA

load.

For the TC1303/TC1304, the power-good output is

based on the regulation of the buck regulator output, the

LDO output or the combination of both. The TC1304

features start-up and shutdown output sequencing.

The TC1303/TC1304 is available in either the 10-pin

DFN or MSOP package.

Additional protection features include: UVLO,

overtemperature and overcurrent protection on both

outputs.

For a complete listing of TC1303/TC1304 standard

parts, consult your Microchip representative.

Applications

•

Cellular Phones

Portable Computers

USB-Powered Devices

Handheld Medical Instruments

Organizers and PDAs

2008 Microchip Technology Inc.

DS21949C-page 1

Recommended Resources

Flashing wall light control circuit

Range hood detection control circuit

Ant SDR-63 electronic disinfection cabinet circuit diagram

Two-speed motor automatic acceleration control circuit diagram

Bipolar regulated power supply circuit with output of ±12V

C51 MCU: [color=#FF0000]***The first one[/color] Can anyone tell me how to learn C51? I haven’t learned digital circuits and analog circuits very well before. I can’t understand the diagrams in them and I can’...; bds489550896 Embedded System

Design of low-cost power supply solution for wireless modems: Zhou MinjieWith the increasing demand for mobile Internet access and3GWith the advent of the wireless network era , more and more end users are beginning to choose data access services based on wirele...; 敏捷 Power technology

Question about the capacitor on the VCAP of stm8s: The manual recommends a 470nF low ESR capacitor.This is not easy to find. What manufacturer and model do you all use?Is it possible to use a non-polar CBB?...; caiguo_zhang stm32/stm8

I don't understand the circuit that changes the positive voltage reference to the negative voltage reference: What is the function of R1 in the second picture? I don't understand the calculation formula. The accuracy of this resistor should not affect the input voltage, right? Can TI's REF50XX reference be us...; littleshrimp Analog electronics

Advice for middle-aged engineers: A few years ago, I wrote a series of articles entitled "Top Ten Advices for Young Engineers". Before I knew it, I had already entered middle age. I have been an engineer for more than ten years, and I...; new_sun Talking about work

The advantages and comparison between DSP and MCU: [b]Advantages and comparison between DSP and MCU[/b]1. DSP is a branch of MCU. It has special instructions required by FFT algorithm and pipeline instruction processing. It can perform calculations at...; sdjntl DSP and ARM Processors

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components