• Highly reliable multilayer electrode construction
• Compatible with all soldering process
Applications:
•
•
•
•
•
•
Telecommunication Equipments
Radio and Tape Recorders, TV Tuners
Digital Cameras, Watches, Pocket Calculators
Automotive Industry
Computers, Instruments
Medical and Military Equipment
Construction:
1
2
3
Alumina Substrate
Bottom Electrode (Ag)
Top Electrode (Ag-Pd)
4
5
6
Edge Electrode (NiCr)
Barrier Layer (Ni)
External Electrode (Sn)
7
8
9
Resistor Layer (RuO
2
/Ag)
Primary Overcoat (Glass)
Secondary Overcoat (Epoxy)
Dimensions
Size
(Inch)
0201
L
0.60±0.03
W
0.30±0.03
T
0.23±0.03
D1
0.15±0.05
D2
0.15±0.05
Unit: mm
Weight
(g)
(1,000pcs)
0.150
www.element14.com
www.farnell.com
www.newark.com
Page <1>
18/07/12
V1.0
0201
Thick Film Chip Resistor
Derating Curve
Standard Electrical Specifications
Item
Power Rating
at 70°C
Jumper
Rated Current
1/20W
1A
Resistance Range
Operating
Temp.
Range
Max.
Operating
Voltage
Max.
Overload
Voltage
±1%
1Ω - 10MΩ
0Ω (<50mΩ)
±5%
TCR
(PPM/°C)
Type
0201
Jumper
-55 ~ +125°C
25V
50V
±200
-
Soldering Condition
IR Reflow Soldering
Wave Soldering (Flow Soldering)
(1) Time of IR reflow soldering at maximum temperature point 260°C : 10s
(2) Time of wave soldering at maximum temperature point 260°C : 10s
(3) Time of soldering iron at maximum temperature point 410°C : 5s
www.element14.com
www.farnell.com
www.newark.com
Page <2>
18/07/12
V1.0
0201
Thick Film Chip Resistor
Environmental Characteristics
Requirement
Item
Temperature Coefficient
of Resistance (T.C.R.)
±1% and
Below
±5%
As Spec.
Jumper
Test Method
JIS-C-5201-1 4.8
IEC-60115-1 4.8
-55°C~+125°C, 25°C is the reference temperature
<50mΩ
JIS-C-5201-1 4.13
IEC-60115-1 4.13
RCWV*2.5 or Max. overload voltage for
5 seconds, 2 seconds for high power series
JIS-C-5201-1 4.6
IEC-60115-1 4.6
Max. overload voltage for 1 minute
JIS-C-5201-1 4.25
IEC-60115-1 4.25.1
<100mΩ
70±2°C, Max. working voltage for 1000 hrs with
1.5 hrs “ON” and 0.5 hrs “OFF”
JIS-C-5201-1 4.24
<100mΩ 40±2°C, 90~95% R.H. Max. working voltage for
1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”
<50mΩ
JIS-C-5201-1 4.23
IEC-60115-1 2.23.2
at +125/+155°C for 1000 hrs
JIS-C-5201-1 4.33
IEC-60115-1 4.33
Bending once for 5 seconds
2010, 2512 sizes : 2mm Other sizes : 3mm
JIS-C-5201-1 4.17
IEC-60115-1 4.17
245 ±5°C for 3 seconds
<50mΩ
JIS-C-5201-1 4.18
IEC-60115-1 4.18
260 ±5°C for 10 seconds
JIS-C-5201-1 4.7
IEC-60115-1 4.7
1.42 times RCWV (RMS) for 1 minute
JIS-C-5201-1 4.18
IEC-60068-2-58 8.2.1
260 ±5°C for 30 seconds
JIS-C-5201-1 4.18
IEC-60115-1 4.18
-55°C to +125/+155°C, 5 cycles
Short Time Overload
±(1.0%+0.05Ω)
±(2.0%+0.05Ω)
Insulation Resistance
≥10G
Endurance
±(1.0%+0.10Ω)
±(2.0%+0.10Ω)
Damp Heat with Load
±(1.0%+0.10Ω)
±(2.0%+0.10Ω)
Dry Heat
±(1.0%+0.05Ω)
±(1.5%+0.10Ω)
Bending Strength
±(1.0%+0.05Ω)
±(1.0%+0.05Ω)
<50mΩ
Solderability
Resistance to
Soldering Heat
Voltage Proof
95% min. coverage
±(0.5%+0.05Ω)
±(1.0%+0.05Ω)
No breakdown or flashover
Individual leaching area < 5%
=
Total leaching area < 10%
=
±(0.5%+0.05Ω)
±(1.0%+0.05Ω)
<50mΩ
Leaching
Rapid Change of
Temperature
Storage Temperature: 25±3°C; Humidity < 80%RH
www.element14.com
www.farnell.com
www.newark.com
Page <3>
18/07/12
V1.0
0201
Packaging
Thick Film Chip Resistor
Reel Specifications & Packaging Quantity
Unit: mm
Type
0201
Packaging Quantity
Paper
15K to 20K
Tape Width
8mm
Reel Diameter
7 inch
ΦA
178.5±1.5
ΦB
60
+1/-0
ΦC
13.0±0.2
W
9.0±0.5
T
12.5±0.5
Paper Tape Specifications
Unit: mm
Type
0201
A
0.38±0.05
B
0.68±0.05
W
8 ± 0.2
E
F
P
0
4 ±0.1
P
1
2±0.05
P
2
2±0.05
ΦD
0
1.5+0.1, -0
T
0.42±0.2
1.75±0.1 3.5±0.05
Part Number Table
Description
Resistor, 0201, 10M0, 1%
Resistor, 0201, 9M10, 1%
Resistor, 0201, 8M20, 1%
Resistor, 0201, 7M50, 1%
Resistor, 0201, 6M80, 1%
Resistor, 0201, 6M20, 1%
Resistor, 0201, 5M60, 1%
Part Number
MCRE000262
MCRE000261
MCRE000260
MCRE000259
MCRE000258
MCRE000257
MCRE000256
www.element14.com
www.farnell.com
www.newark.com
Page <4>
18/07/12
V1.0
0201
Thick Film Chip Resistor
Description
Resistor, 0201, 5M10, 1%
Resistor, 0201, 4M70, 1%
Resistor, 0201, 4M30, 1%
Resistor, 0201, 3M90, 1%
Resistor, 0201, 3M60, 1%
Resistor, 0201, 3M30, 1%
Resistor, 0201, 3M00, 1%
Resistor, 0201, 2M70, 1%
Resistor, 0201, 2M40, 1%
Resistor, 0201, 2M20, 1%
Resistor, 0201, 2M00, 1%
Resistor, 0201, 1M80, 1%
Resistor, 0201, 1M60, 1%
Resistor, 0201, 1M50, 1%
Resistor, 0201, 1M30, 1%
Resistor, 0201, 1M20, 1%
Resistor, 0201, 1M10, 1%
Resistor, 0201, 9R10, 1%
Part Number
MCRE000255
MCRE000254
MCRE000253
MCRE000252
MCRE000251
MCRE000250
MCRE000249
MCRE000248
MCRE000247
MCRE000246
MCRE000245
MCRE000244
MCRE000243
MCRE000242
MCRE000241
MCRE000240
MCRE000239
MCRE000238
Description
Resistor, 0201, 8R20, 1%
Resistor, 0201, 7R50, 1%
Resistor, 0201, 6R20, 1%
Resistor, 0201, 5R60, 1%
Resistor, 0201, 5R10, 1%
Resistor, 0201, 4R30, 1%
Resistor, 0201, 3R90, 1%
Resistor, 0201, 3R60, 1%
Resistor, 0201, 3R0, 1%
Resistor, 0201, 2R70, 1%
Resistor, 0201, 2R40, 1%
Resistor, 0201, 2R0, 1%
Resistor, 0201, 1R80, 1%
Resistor, 0201, 1R60, 1%
Resistor, 0201, 1R30, 1%
Resistor, 0201, 1R20, 1%
Resistor, 0201, 1R10, 1%
Resistor, 0201, 1R0, 1%
Part Number
MCRE000237
MCRE000236
MCRE000235
MCRE000234
MCRE000233
MCRE000232
MCRE000231
MCRE000230
MCRE000229
MCRE000228
MCRE000227
MCRE000226
MCRE000225
MCRE000224
MCRE000223
MCRE000222
MCRE000221
MCRE000220
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Guodian Technology has fully open-sourced MP3 hardware, including the GD5600 GD5800 GD5801 series minimum working system, which includes PCB, schematics, BOM, and datasheet. Users can directly import ...
[i=s] This post was last edited by littleshrimp on 2017-1-19 12:15 [/i] After the AD9102 DDS is configured, there is no output schematic. I modified it based on the official reference design and only ...
In China, there are many boasters, many experts and scholars, many plagiarists and copycats, and few people who really do things. Give everyone something new!!!...
[i=s]This post was last edited by xianxiaoxu on 2022-10-16 21:56[/i]Intelligent portable formaldehyde tester1. Introduction of the work (100-200 words)
The harm of formaldehyde is self-evident. It is ...
[align=center][b][font=宋体][color=#000000]Water suspension[/color][/font][/b][/align][align=left][font=宋体][color=#000000]The camera is a real-time image capture device invented to imitate the human eye...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
1 Introduction
As an emerging microfabrication technology, micro-electromechanical system (MEMS) technology has begun to be applied in various fields. It can integrate functions such as inform...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
A multi-point temperature control heating control system was designed using the SST89E564RC single-chip microcomputer and a new temperature measuring device. The heating system can be controlled in...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
my country is a big country in agriculture, grain production and consumption. Grains are a necessary condition for our nation to survive and develop. The flour processing industry will exist forever w...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
Flooded Batteries
This battery developed in Germany can be used to power flashlights, strobe lights and toys as long as it is filled with water. This battery can be stored for 50 years and can...[Details]
Many battery-powered systems require a visual indicator to show when the battery needs to be replaced. LEDs are commonly used for this purpose, but they consume at least 10mA of current. This con...[Details]