FC*: Straight plug, cable clamp and safety locking ring
2 keys (alpha=37.5, plug: female contacts, receptacle: male contacts)
Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
D15: 13.6 - 15 mm
Z : Nut for fitting a bend relief
114.07 g
Performance
Configuration
Insulator
Rated Current
L: PEEK (UL 94 / V-0/3.2, depends on material thickness)
4 Amps
Specifications
Contact Type: Solder
Test voltage (kV DC) 18
Test voltage (kV AC) 12.7
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
1/3
Creepage dist.(mm): 8
Others
Temp (min / max): -55°C / +250°C
Humidity (max): <=95% [at 60 deg C /140 F]
Vibration: 15 g [10 Hz - 2000 Hz]
Shock Resistance: 100 g [ 6 ms]
Salt Spray Corrosion: >1000 hr
Climatical Category: 50/175/21
Shielding (min): 75 dB (10 MHz)
Shielding (min): 40 dB (1 GHz)
IP Rating: 50
DRAWINGS
Draws
Dimensions
A
mm.
in.
25
0,98
L
75
2,95
M
57
2,24
S1
21
0,83
S2
20
0,79
RECOMMENDED BY LEMO
Tools
None
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
2/3
Cables
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
In the [size=4] project, a simple wheel is made using ADC + potentiometer to facilitate the setting of group number grp. Because there are more than 20 group numbers in total, it is too tiring to swit...
Now I am preparing for an electronic design competition, and I am working on an electronic dummy load. I have completed the constant current and constant voltage cross-resistance mode in the DC mode, ...
I am using LM3S 9B81 to do a project recently. I need to respond to the status query information of each port sent by the host computer at any time. If there is no data transmission or reception, how ...
Does VCOin need to add Vcc/2 bias voltage? I added bias voltage, center frequency f0 is 166KHZ, but added 300mV analog audio input (1KHz sine wave), no modulation waveform, still square wave, I wonder...
Hey guys, I am going to learn zigbee. In order to learn, I am going to buy a development board. Can an expert recommend which development board is good and has good information? Thank you:)...
Although a classmate uploaded the DHT11 program before, I found that the program was not easy to use. Haha, I also adjusted it at that time. Now I refer to that classmate's program, optimize the relev...
Renesas Electronics MCUs
京公网安备 11010802033920号
EEWORLD
