EEWORLDEEWORLDEEWORLD

Part Number

Search

AT73C224-E_14

Description
Activation of the Power Management Modules via Dedicated Enable Pin
File Size853KB,75 Pages
ManufacturerAtmel (Microchip)
Download Datasheet Compare View All

AT73C224-E_14 Overview

Activation of the Power Management Modules via Dedicated Enable Pin

Features
DC/DC Step-up Converter (BOOST) 3.3V to 5.2V, 1A, up to 90% Efficiency. Can be Used
as BUCK/BOOST in SEPIC Configuration
DC/DC Step-down (BUCK) Synchronous Converter 0.9V to 3.4V, 500mA, up to 90%
Efficiency, Pulse Skipping Capabilities for High Efficiency at Light Load Currents
Two Low-Drop-Out Regulators 1.3V, 1.5V to 1.8V, 2.5V to 2.8V (100 mV Step), 3.3V,
200 mA Maximum Load
Ultra-low Power Real-time Clock (RTC) and Backup Battery Management
– 2.6V RTC LDO for Backup Battery Charging
– 32 kHz Crystal RTC Oscillator (1 µA)
– RTC Circuit for Time and Date Information
Activation of the Power Management Modules via Dedicated Enable Pin
Automatic Start-up Sequences, POK Signal Indicating When Start-up is Completed
Activation and Control of the Power Management Modules in Dynamic Mode (via SPI or
TWI) or in Static Mode (On/Off of the Four Power Supplies)
ITB Signal Indicating Short-circuits in DC/DC Converters
Very Low Quiescent Current
Minimum External Components Count
Supply: from 2.8V to 5.25V (typ: Li-Ion Battery 3V to 4.2V)
Available in a 32-pin 5x5 QFN Package
Applications Include:
– WLAN Portable Devices
– Multimedia Devices
– Portable Music Players
Power
Management
and Analog
Companions
(PMAAC)
AT73C224-A
AT73C224-B
AT73C224-C
AT73C224-D
AT73C224-E
AT73C224-F
AT73C224-G
AT73C224-H
4x Channels
Power Supply:
DC/DC BOOST
DC/DC BUCK
.
2x LDOs
RTC
6266A–PMAAC–08-Sep-08
1. Description
The AT73C224-x is a family of ultra low cost Power Management Unit, available in a
small outline QFN 5x5mm package.
The AT73C224-x family is optimized for portable applications, typically powered by a
Li-Ion battery. The AT73C224-x device is also suitable to operate from a standard
3.3V to 5.25V voltage rail. It includes four power supplies and a very low power Real-
time Clock (RTC). In normal mode (main battery present), the backup battery is
recharged through a 2.6V RTC LDO.
The AT73C224-x series offer different automatic start-up sequences (with varying
orders of power-on and specific default output values) and different soft management
modes: dynamic (via SPI or TWI) with register access or static, with access to power
on/off of the four power supplies.
Each AT73C224-x device is equipped with a very low power bandgap reference, low
power 32 kHz and 1 MHz oscillators and an internal LDO used to generate the internal
supply (VINT) equal to 2.8V. Auxiliary cells, such as a power-on reset (POR) and a
voltage monitor are used to control the system power-on (battery plugged in) and
power-off (battery unplugged).
The four power supplies are named: BOOST1, BUCK2, LDO3 and LDO4.
Table 1-1
lists the different devices available in the AT73C224-x series.

AT73C224-E_14 Related Products

AT73C224-E_14 AT73C224-A_14 AT73C224-B_14 AT73C224-D_14 AT73C224-G_14 AT73C224-C_14 AT73C224-H_14
Description Activation of the Power Management Modules via Dedicated Enable Pin Ultra-low Power Real-time Clock (RTC) and Backup Battery Management Ultra-low Power Real-time Clock (RTC) and Backup Battery Management Ultra-low Power Real-time Clock (RTC) and Backup Battery Management Ultra-low Power Real-time Clock (RTC) and Backup Battery Management Ultra-low Power Real-time Clock (RTC) and Backup Battery Management Ultra-low Power Real-time Clock (RTC) and Backup Battery Management
Problems with the JTAG port of cyclone4
I have seen various versions online, some say that the JTAG port needs 3.3V, some say that it needs 2.5V. I have a USB_BLASTER downloader. I don't know how many volts it should use. Another question i...
平漂流 FPGA/CPLD
Release a batch of development boards, stm32 and TI official boards (already released)
[i=s]This post was last edited by flashtt on 2017-3-12 16:36[/i] First of all, I would like to express my apologies to the forum. Some of these boards were purchased during forum activities, but unfor...
flashtt Buy&Sell
Questions about AVR
Is there any expert who can help me explain the meaning of the statements with // in the following function? Thank you void init_devices(void) { CLI(); // port_init(); MCUCR = 0x00; // GICR = 0x00; //...
ruiquan765 Microchip MCU
eCAP collects pulse frequency without stopping
[color=#000]I would like to ask you, I use the eCAP module of F28335 to collect the frequency of pulses. When I stop sending pulses, the eCAP module always displays the frequency of the last pulse cap...
zhangrong Microcontroller MCU
Principles, applications and current status of piezoelectric materials
The piezoelectric effect was discovered by the Curie brothers when they were studying quartz more than 100 years ago. So, what is the piezoelectric effect?...
fighting Test/Measurement
Discussion on the configuration of the RL78G14 timer
I recently participated in the RL78G14 DIY activity on the forum and benefited a lot. Since I have never been exposed to Renesas chips before, some modules are unfamiliar to me, especially the timer m...
shower.xu Renesas Electronics MCUs

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 132  1210  1155  897  2237  3  25  24  19  46 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号