• Retainer clip option permits stability for mobile
and high vibration applications
• RoHS* compliant version (PG & PK plating
suffix) available
Date Modified: September 23, 2005
TS-0662-21
Sheet 1 of 4
Physical
Insulation
Material: Liquid Crystal Polyester (LCP)
Flammability: UL 94V-0
Color: Beige
Contact
Material: Copper Alloy
Plating
Underplating: 100
µ″
[ 2.54
µm
] Nickel
Wiping Area: Gold flash over 80/20 Palladium Nickel (see Ordering Information)
Solder Tails: 50
µ″
[ 1.27
µm
] 85/15 Tin Lead - or Gold Flash (see Ordering Information)
Electrical
Current Rating:
.5 A
9
8
Insulation Resistance:
>1
×
10
Ω
at 500 Vdc, >1
×
10
Ω
at 500 Vdc after Environmental
Conditioning
Withstanding Voltage:
500 Vrms at Sea Level
Environmental
Temperature Rating:
-55°C to +85°C
Process Rating:
Maximum 260°C (per J-STD-020C)
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
CompactFlash is a registered trademark of SanDisk Corporation.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
CF Card Header
CompactFlash Type I, Surface Mount
Pin Type
detect
general
power
Interface Dim A
3.50 [ .138 ]
4.25 [ .167 ]
5.00 [ .197 ]
7E50 Series
Pin No.
25, 26
all other pins
1, 13, 38 & 50
2X Ø
2.20
[ .087 ]
40.16
[ 1.581 ]
0.635 Typ
[ .0250 ]
Pin 1
Pin 50
Pin 25
Pin 26
Pin 13
Pin 38
A
2X 2.71
[ .107 ]
6.64
±
0.08
[ .261 ]
0.75
[ .030 ]
1.00
[ .039 ]
Ø1.50
[ .059 ]
2X 4.00
[ .157 ]
26.5
[ 1.04 ]
23.5
[ .93 ]
A
16.0
[ .63 ]
11.3
[ .44 ]
19.00
[ .748 ]
-A-
1.50
[ .059 ]
2X 2.00
[ .079 ]
35.9
[ 1.41 ]
46.6
[ 1.83 ]
2.54
[ .100 ]
-B-
1.8
[ .07 ]
0.64
[ .025 ]
-A-
1.40
±
0.05
[ .055 ]
(See note )
43.03
±
0.06
[ 1.694 ]
30.48 Ref
[ 1.200 ]
Pin 25
Pin 1
Pin 50
Pin 38
Pin 26
Pin 13
1.75
[ .069 ]
2.00
[ .079 ]
11.0
[ .43 ]
9.50
[ .374 ]
A
3.50
[ .138 ]
1.27 Typ
[ .050 ]
40.16
[ 1.58 ]
mm
[Inch]
Tolerance Unless Noted
.0
mm
±
.3
.00
±
.15
.000
.79
±
0.05
[ .031 ]
(See note)
2X .89
±
0.05
[ .035 ]
4.5
[ .18 ]
2.5
[ .098 ]
3.50
±
0.08
[ .138 ]
5.00
[ .197 ]
Section A-A
[ ] Dimensions for
Reference only
Note: Normal ( Option “7" ) style shown. For Inverse style rotate polarization keys and pin call outs 180°.
Ordering Information
N7E50-X516XX-20
Options: CF Card Polarization
7 = Normal
A = Inverse
Plating
VU = Au Flash over 25µ″ [ 0.64µm ] PdNi with Sn-Pb
PG = Au Flash over 25u" [.64um] PdNi with Au Flash tails
(RoHS compliant)
PK = Au Flash over 20 u" [0.5um] PdNi with Au flash tails
TS-0662-21
(RoHS compliant)
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
CF Card Header
CompactFlash Type I, Surface Mount
7E50 Series
2X 3.00
±
0.15
[ .118 ]
46.13
±
0.15
[ 1.816 ]
40.16
±
0.10
[ 1.581 ]
Detail A
3.50
±
0.05
[ .138 ]
3.00
±
0.10
[ .118 ]
7.55
±
0.05
[ .297 ]
2X 5.0
±
0.15
[ .197 ]
2X Ø2.20
±
0.05
[ .087 ]
( Through for M2 )
2X Ø1.70
±
0.03
[ .067 ]
( Through for locating Boss )
2.00
±
0.15
[ .079 ]
40.16
±
0.05
[ 1.581 ]
20.5 Min
[ .81 ]
The End of P.C. Board
The Direction of Inserting Card
Recommended PCB Solder Pad Pattern
31.11
±
0.05
[ 1.225 ]
0.635
±
0.030 Typ
[ .0250 ]
0.40
±
0.03 Typ
[ .016 ]
Pin 26
Pin 1
( Normal )
Pin 26
Pin 1
( Inverse )
Detail A
TS-0662-21
Sheet 3 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
CF Card Header
CompactFlash Type I, Surface Mount
Right Button Ejector 3M Part
D7E50-7316-03
( Order Separately - See note )
7E50 Series
Centerline of Header
26.5
[ 1.04 ]
7.0 Ref
[ .28 ]
for sliding length
4.0
[ .16 ]
Ejecting Length
43.9 Ref
[ 1.73 ]
17.4 Ref
[ .69 ]
7.0 [ .28 ]
Pushing Length
23.82 Ref
[ .938 ]
52.1
[ 2.05 ]
25.81 Ref
[ 1.016 ]
Marking Area
0.75 Ref
[ .030 ]
4.0
[ .16 ]
5.5
[ .22 ]
Material
Holder: Glass Filled LCP
Button: PBT
Plate: Stainless Steel
7.1 [ .28 ]
Installed height
CF Card Retainer Clip 3M Part
3505-34
( Order Separately - See note )
2X 4.6
[ .18 ]
38.9
[ 1.53 ]
18.0
[ .71 ]
47.0 Ref
[ 1.85 ]
34.8
[ 1.37 ]
Material: 1.0mm Dia, Type 302 Stainless
Steel wire per ASTM A-313
6.38
[ .251 ]
2X 7.16
[ .282 ]
2X 4.42
[ .174 ]
Note: Use of either an ejector or a retainer clip excludes the use of the other.
TS-0662-21
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product.
Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
I received a free trial of the eZ430-RF2500 board today. It is a very fine board. I didn't upload any pictures because it doesn't have a camera. I will upload them another day. Now I have to learn 430...
1. Selection of pull-up resistor for MCU You can see that when the resistor R1=10k in the reset circuit, RST is high level, and when R1=50, RST is low level. It is obvious that when R1=10k, it is wro...
Added startup code in keilZSorry I don't know much about assemblyIMPORT SystemInitIMPORT __mainLDR R0, =SystemInitBLX R0LDR R0, =__mainBX R0ENDPWhat does this entrance mean?One more question
//RCC-CR=...
Personalized book printing, starting from one copy is the goal of MrPrint.cn, the largest personal book publishing website. To celebrate the launch of the "One-click blog book" system, now you can get...
I have been troubled by a problem recently. My driver will blue screen when I use createFile to access it~~ The first parameter of my CreateFile is the symbolic link name + pipe number: \\.\\\\SymLink...
Traditional sensing technologies have been used to solve challenging problems such as people counting, motion detection, industrial area scanning, and robotics to detect objects and avoid collisions.A...
1. Introduction
At present, with the continuous development of modern medical devices, especially electronic instruments directly connected to the human body, in addition to the increasingly high...[Details]
The circuit shown in the figure is a three-digit tachometer used to measure low frequency signals with a repetitive time interval of 0.235 to 15 seconds. The tachometer has a speed range of 4 to 255 r...[Details]
Human body information monitoring is an emerging field. People envision developing wireless electroencephalogram (EEG) monitoring equipment to diagnose epilepsy patients. Wearable wireless EEG can ...[Details]
Blood pressure is one of the important physiological parameters of the human body. Accurate measurement of it is conducive to early detection and identification of hypertension types, and to the pro...[Details]
As a branch of signal and information processing, digital signal processing has penetrated into various fields of scientific research, technological development, industrial production, national defens...[Details]
Controller Area Network (CAN) is a type of fieldbus. It is a serial communication network that effectively supports distributed control or real-time control and is recognized as one of the most pro...[Details]
Engineers who are new to wireless design and wireless product development need to master the basics of
RF measurement
. In many cases, this process is to enable engineers who have been engag...[Details]
0 Introduction
Today, with the rapid development of electronic technology and the emergence of new multifunctional electric energy meters, the choice of memory in the electric energy m...[Details]
1 Introduction
The intelligent meter reading system is a system that reads the data of multiple user meters in a centralized manner through the transmission media by the master station. It...[Details]
When using GPS for positioning, it will be affected by various factors. The factors that affect the accuracy of GPS positioning can be divided into the following four categories (see the figure be...[Details]
Semiconductor devices used in high-end computing (advanced microprocessors) and consumer electronics (graphics and gaming chipsets) devices generally provide data rates up to 6.4Gbps through hig...[Details]
In a Class D audio power amplifier, the preamplifier is a relatively important module. It is located at the front of the entire topology and completes the processing of the input signal source,...[Details]
Electrocardiogram is an important means of diagnosing heart disease. However, due to various reasons, it is difficult to capture abnormal electrocardiograms with ordinary electrocardiographs. Although...[Details]
The microwave multifunctional therapeutic device uses microwave radiation for heating treatment, which can achieve the effects of sterilization and blood circulation. Using microwaves to directly c...[Details]
Abstract:
This paper introduces the excitation system designed for 3/3 phase double winding induction generator, which is composed of DSP and FPGA. The interface circuit of the control sys...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
