• Retainer clip option permits stability for mobile
and high vibration applications
• RoHS* compliant version (PG & PK plating
suffix) available
Date Modified: September 23, 2005
TS-0662-21
Sheet 1 of 4
Physical
Insulation
Material: Liquid Crystal Polyester (LCP)
Flammability: UL 94V-0
Color: Beige
Contact
Material: Copper Alloy
Plating
Underplating: 100
µ″
[ 2.54
µm
] Nickel
Wiping Area: Gold flash over 80/20 Palladium Nickel (see Ordering Information)
Solder Tails: 50
µ″
[ 1.27
µm
] 85/15 Tin Lead - or Gold Flash (see Ordering Information)
Electrical
Current Rating:
.5 A
9
8
Insulation Resistance:
>1
×
10
Ω
at 500 Vdc, >1
×
10
Ω
at 500 Vdc after Environmental
Conditioning
Withstanding Voltage:
500 Vrms at Sea Level
Environmental
Temperature Rating:
-55°C to +85°C
Process Rating:
Maximum 260°C (per J-STD-020C)
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
CompactFlash is a registered trademark of SanDisk Corporation.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
CF Card Header
CompactFlash Type I, Surface Mount
Pin Type
detect
general
power
Interface Dim A
3.50 [ .138 ]
4.25 [ .167 ]
5.00 [ .197 ]
7E50 Series
Pin No.
25, 26
all other pins
1, 13, 38 & 50
2X Ø
2.20
[ .087 ]
40.16
[ 1.581 ]
0.635 Typ
[ .0250 ]
Pin 1
Pin 50
Pin 25
Pin 26
Pin 13
Pin 38
A
2X 2.71
[ .107 ]
6.64
±
0.08
[ .261 ]
0.75
[ .030 ]
1.00
[ .039 ]
Ø1.50
[ .059 ]
2X 4.00
[ .157 ]
26.5
[ 1.04 ]
23.5
[ .93 ]
A
16.0
[ .63 ]
11.3
[ .44 ]
19.00
[ .748 ]
-A-
1.50
[ .059 ]
2X 2.00
[ .079 ]
35.9
[ 1.41 ]
46.6
[ 1.83 ]
2.54
[ .100 ]
-B-
1.8
[ .07 ]
0.64
[ .025 ]
-A-
1.40
±
0.05
[ .055 ]
(See note )
43.03
±
0.06
[ 1.694 ]
30.48 Ref
[ 1.200 ]
Pin 25
Pin 1
Pin 50
Pin 38
Pin 26
Pin 13
1.75
[ .069 ]
2.00
[ .079 ]
11.0
[ .43 ]
9.50
[ .374 ]
A
3.50
[ .138 ]
1.27 Typ
[ .050 ]
40.16
[ 1.58 ]
mm
[Inch]
Tolerance Unless Noted
.0
mm
±
.3
.00
±
.15
.000
.79
±
0.05
[ .031 ]
(See note)
2X .89
±
0.05
[ .035 ]
4.5
[ .18 ]
2.5
[ .098 ]
3.50
±
0.08
[ .138 ]
5.00
[ .197 ]
Section A-A
[ ] Dimensions for
Reference only
Note: Normal ( Option “7" ) style shown. For Inverse style rotate polarization keys and pin call outs 180°.
Ordering Information
N7E50-X516XX-20
Options: CF Card Polarization
7 = Normal
A = Inverse
Plating
VU = Au Flash over 25µ″ [ 0.64µm ] PdNi with Sn-Pb
PG = Au Flash over 25u" [.64um] PdNi with Au Flash tails
(RoHS compliant)
PK = Au Flash over 20 u" [0.5um] PdNi with Au flash tails
TS-0662-21
(RoHS compliant)
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
CF Card Header
CompactFlash Type I, Surface Mount
7E50 Series
2X 3.00
±
0.15
[ .118 ]
46.13
±
0.15
[ 1.816 ]
40.16
±
0.10
[ 1.581 ]
Detail A
3.50
±
0.05
[ .138 ]
3.00
±
0.10
[ .118 ]
7.55
±
0.05
[ .297 ]
2X 5.0
±
0.15
[ .197 ]
2X Ø2.20
±
0.05
[ .087 ]
( Through for M2 )
2X Ø1.70
±
0.03
[ .067 ]
( Through for locating Boss )
2.00
±
0.15
[ .079 ]
40.16
±
0.05
[ 1.581 ]
20.5 Min
[ .81 ]
The End of P.C. Board
The Direction of Inserting Card
Recommended PCB Solder Pad Pattern
31.11
±
0.05
[ 1.225 ]
0.635
±
0.030 Typ
[ .0250 ]
0.40
±
0.03 Typ
[ .016 ]
Pin 26
Pin 1
( Normal )
Pin 26
Pin 1
( Inverse )
Detail A
TS-0662-21
Sheet 3 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
CF Card Header
CompactFlash Type I, Surface Mount
Right Button Ejector 3M Part
D7E50-7316-03
( Order Separately - See note )
7E50 Series
Centerline of Header
26.5
[ 1.04 ]
7.0 Ref
[ .28 ]
for sliding length
4.0
[ .16 ]
Ejecting Length
43.9 Ref
[ 1.73 ]
17.4 Ref
[ .69 ]
7.0 [ .28 ]
Pushing Length
23.82 Ref
[ .938 ]
52.1
[ 2.05 ]
25.81 Ref
[ 1.016 ]
Marking Area
0.75 Ref
[ .030 ]
4.0
[ .16 ]
5.5
[ .22 ]
Material
Holder: Glass Filled LCP
Button: PBT
Plate: Stainless Steel
7.1 [ .28 ]
Installed height
CF Card Retainer Clip 3M Part
3505-34
( Order Separately - See note )
2X 4.6
[ .18 ]
38.9
[ 1.53 ]
18.0
[ .71 ]
47.0 Ref
[ 1.85 ]
34.8
[ 1.37 ]
Material: 1.0mm Dia, Type 302 Stainless
Steel wire per ASTM A-313
6.38
[ .251 ]
2X 7.16
[ .282 ]
2X 4.42
[ .174 ]
Note: Use of either an ejector or a retainer clip excludes the use of the other.
TS-0662-21
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product.
Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
[font=微软雅黑]Using modelsim-altera to simulate the frequency multiplication of a PLL core, sometimes the output is normal, sometimes the frequency multiplication is not achieved, and sometimes there is ...
Application technology of POWERPCB in printed circuit board design【Source: SMT Expert Network】【Author: admin】【Time: 2005-12-27 9:11:15】【Click: 1211】Printed circuit board (PCB) is the support for circu...
TI Embedded Live Month: In-depth exploration of new applications of embedded products in industry and automobiles. Registration for prize live broadcast is open~Click here to registerAre you intereste...
Today, I was busy with testing, and my colleague asked me to sign for the express delivery. I was still depressed at the time. I didn't buy anything recently, so where did the express delivery come fr...
Project Overview
The micro urine analyzer we designed can detect ten parameters of urine, including white blood cells, nitrite, urobilinogen, protein, pH value, occult blood, specific g...[Details]
Embedded systems are the replacement products of computer technology, communication technology, semiconductor technology, microelectronics technology, voice and image data transmission technology, and...[Details]
Medicines are special commodities. If patients are given the wrong medicine, fake medicine, inferior medicine or expired medicine, it will pose a threat to people's health and lives.
In recent...[Details]
As a branch of signal and information processing, digital signal processing has penetrated into various fields of scientific research, technological development, industrial production, national defens...[Details]
Many medical applications require portable, self-powered devices that do not require external power and data cables. The most obvious example is a portable data logger that patients carry with them to...[Details]
With the rapid development of digital technology, various digital display screens have emerged, including LED, LCD, DLP, etc. There are various control systems for various digital large screens, in...[Details]
Signal sources have developed to a very wide range today. We can classify them according to the frequency range: ultra-low frequency (0.1m～1kHz), audio (20Hz～20kHz), video (20kHz～10MHz), radio fre...[Details]
As microcontrollers become less expensive and more powerful, electrical designers are finding it more cost-effective to use multiple small controllers in both single-board and multi-board systems. ...[Details]
0 Introduction
Today, with the rapid development of electronic technology and the emergence of new multifunctional electric energy meters, the choice of memory in the electric energy m...[Details]
When using GPS for positioning, it will be affected by various factors. The factors that affect the accuracy of GPS positioning can be divided into the following four categories (see the figure be...[Details]
Preface
In the analog era, due to the unchanged specifications and relatively simple device connections, as well as users' low requirements for image quality, the relatively simple environment...[Details]
Fetal monitoring is an important means to ensure the safety of perinatal mothers and fetuses and achieve eugenics. Intelligent fetal monitoring is a monitoring method that analyzes the health stat...[Details]
Introduction
The home ECG and blood pressure monitoring system consists of a data acquisition and recording device and a host computer electronic medical record management system. Therefor...[Details]
0Introduction
As a service robot in the field of medical care, the application of smart wheelchairs makes extensive use of mobile robot technology. The key technologies involved in the researc...[Details]
l Introduction
Traditional human-computer communication is achieved through keyboard or mouse. The speed of information exchange is relatively slow, and the operator is required to have certain...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
