P5-613323 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> P5-613323

P5-613323: DescriptionPushbutton Switch, SPDT, On-on, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount-threaded; CategoryMechanical and electronic products switch; File Size696KB，2 Pages; ManufacturerOTTO; Websitehttp://www.ottoexcellence.com

Download Datasheet Parametric View All

P5-613323 Overview

Pushbutton Switch, SPDT, On-on, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount-threaded

P5-613323 Parametric

Parameter Name	Attribute value
Maker	OTTO
Reach Compliance Code	unknown
ECCN code	EAR99
Actuator angle
Actuator length	0.312 inch
Actuator material	NYLON
Actuator stroke	4.572 mm
Actuator type	PUSHBUTTON
Other features	ORANGE, WATERPRF BLK BEZ
body height	20.66 mm
Body length or diameter	22.23 mm
Nozzle length	0.437 inch
Casing type	5/8-24
Center contact plating	SILVER
Contact (AC) maximum rated load I	5A@115VAC
Contact (AC) maximum rated load M	3A@115VAC
Contact (AC) maximum rated R load	10A@115VAC
Maximum contact current (AC)	10 A
Maximum contact current (DC)	10 A
Contact (DC) maximum rated R load	10A@28VDC
Contact function	ON-ON
contact time	SNAP ACTION
Maximum contact voltage (AC)	115 V
Maximum contact voltage (DC)	28 V
Dielectric withstand voltage	1050VRMS V
Electrical life	25000 Cycle(s)
End contact plating	SILVER
Shell material	ALUMINUM ALLOY
JESD-609 code	e4
Manufacturer's serial number	P5
Installation features	PANEL MOUNT-THREADED
Maximum operating force	17.79 N
seal	EPOXY TERMINAL SEALED; IP68
surface mount	NO
Switch action	ALTERNATE
switch function	SPDT
Switch type	PUSHBUTTON SWITCH
Terminal surface	GOLD/SILVER
Terminal length	0.156 inch
Termination type	SOLDER

Preview

Download Datasheet

View All

ALTERNATE

ACTION

ALTERNATE ACTION PUSHBUTTONS

SEALED AGAINST DUST & MOISTURE

The P5 Alternate Action switches match the P1, P3 and P8

Momentary Action Pushbutton models for mixed function

with common panel appearance. Now you can design panels

with both alternate and momentary action switches and have

uniform panel appearance. The P5 features alternate action

in the same pushbutton and housing configuration as the

momentary P1 and P3 and as a bonus, the P5 requires less

behind the panel space than the P1 and P3 momentary versions.

Push and the P5 switch turns “on.” Push again and the P5 switch

turns “off.” Positive tactile feedback is featured so the operator

is clearly aware the switch mode has been executed. The button

returns to the original position after each actuation.

To guard against front panel splash and dirt, the P5 series

is sealed at the button with OTTO’s patented “rolling

sleeve”principle. The terminals are sealed with epoxy, providing

a seal against flux during wiring and behind panel dirt and

moisture. The combination of sealing provides smooth operation

over a wide temperature range. Watertight sealing to IP68S is

available.

A vandal resistant style is available in the P5-V series. Custom

housings, shrouded buttons, contact configurations and

materials are available to suit your application requirements. We

also provide custom button engraving with epoxy ink backfill,

watertight versions and other special characteristics.

, Push O

“Push On

ff” action

Style P5-4

Style P5-3

Style P5-6

Style P5-1

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load

Resistive

Inductive

Lamp

Motor

DWV

Low Level

Electrical Life:

Mechanical Life:

Seal:

Operating Force:

Total Travel:

Overtravel:

Sea Level @ 28VDC

or 115VAC, 60/400Hz

10A

1050Vrms

10mA @ 30mV

25,000 cycles

1,000,000 cycles

IP64 & MIL-PRF-8805 Design 2 or IP68S

3.0 lbs. +1/-0.5 lb.

0.180 inches max

0.012 inches min

Features:

• Button sealed with patented “rolling sleeve” principle

• Contact area sealed at case & terminals

• Moistureproof & dusttight to IP64 & MIL-PRF-8805

Design 2 or watertight to IP68S

• Less than 25mΩ contact resistance

• Handles low level up to 10 amps

• Variety of mounting styles

• Engraved buttons available

• Choice of 9 button & 3 bezel colors

• Panel appearance matches most other OTTO

momentary pushbutton switches

• Unsealed construction also available

• RoHS/WEEE/Reach compliant

Operating Temp Range:

-55°C to +85°C

MATERIALS:

Case:

Button:

Terminals:

Terminal Hardware:

Mounting Hardware:

Anodized aluminum alloy

Thermoplastic

Brass, silver plate or gold plate for low level

Terminal lugs, lockwasher and screw for screw terminal option

Hex nut, lockwasher and panel seal on watertight switches

119

OTTO Full Line Catalog

Specifications Subject To Change Without Notice

Recommended Resources

Farmland irrigation automatic control circuit a

Automatic switching circuit for motor Y-△ connection

High performance antenna amplifier circuitb

Infrared detector amplifier circuit

Temperature upper limit animal whine alarm and automatic ventilation and cooling control circuit

Circuit diagram: schematic diagram of 5402 controlling 8019

Why is there a 2 in the denominator when calculating the baud rate of the serial port communication of the 51 single-chip microcomputer? I have always wondered why it is divided by 2: Why is there a 2 in the denominator when calculating the baud rate of the serial port communication of the 51 single-chip microcomputer? I have never understood why it is divided by 2. As shown in the...; 一沙一世 stm32/stm8

[Ask] Questions about using IAR: When I was using ez430-RF2500, after installing the built-in IAR environment on the CD, when I openedthe project file in the built-in eZ430-RF2500 Wireless Sensor Monitor IAR Source v1.02 in IAR,the f...; hjy109 Microcontroller MCU

Coherent multiprocessing on a single chip (Figure): [b]With the advent of SoC design elements such as the MIPS32 1004K Coherent Processing System (CPS), on-chip symmetric multiprocessing (SMP) with a single operating system has become a real design cho...; 黑衣人 MCU

Power Supply Reference Design for Altera Stratix IV EP4SGX70 and EP4SGX110 Devices: The Altera Stratix IV FPGA EP4SGX70 and EP4SGX110 reference design showcases the TI Power Distribution System plug-in power module....; 莫妮卡 Analogue and Mixed Signal

The BH1750 light sensor networking experiment doesn't work, but it works alone. Please help.: I am working on my graduation project, which involves using CC2530 to communicate with the BH1750 light sensor to get the light intensity. It works when there is only one CC2530, but it doesn't work w...; 为何InSomNia RF/Wirelessly

About M4's printf()......: Today I used the serial port of launchpad. After initialization, I used its built-in UARTCharPut() to print characters. Then I thought the printf function in C language is very useful, so I wanted to ...; 住你家 Microcontroller MCU

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components