CompactPCI
®
SYSTEM POWER SUPPLIES
CPCI SERIES
150 to 350 Watts, Ac Input with PFC
DCPI SERIES
150 to 350 Watts, 48 Vdc Input
FEATURES:
•
EXECUTIVE MEMBER
•
•
•
•
•
•
150 W and 200 W in 3U x 8HP, 350 W in 6U x 8HP
Fully compliant with PICMG
CompactPCI
®
specifications
Current sharing and internal OR-ing diodes for N+1 redundancy
High current 5 V and 3.3 V outputs
CompactPCI
®
package requires only 15 cfm of external cooling air
Universal ac input versions with power factor correction
48 Vdc input versions
The CPCI series (ac input) and DPCI series (dc input) are highly reliable
power supplies for CompactPCI systems, which are increasingly used
in communications, industrial, military/aerospace, and other applications.
These power supplies offer high power density in plug-in modules
that meet the requirements of the PICMG
®
power interface specification
for CompactPCI systems.
These units may be used as a single power supply for a CompactPCI
system, or multiple units may be used in parallel for higher power capabil-
ity as needed. In addition, all units include current sharing, internal
OR-ing diodes, and a hot plug input/output connector to offer full hot
swap capability and N+1 redundancy. Also, compatible ac and dc input
units offer standardization on a single power supply series for a system
mechanical configuration.
3U x 8 HP
6U x 8 HP
Connector
47 Pin Modular
Input
Ac
Dc
Power
150 W
200 W
150 W
200 W
150 W
200 W
150 W
200 W
Model No.
CPCI-154-1203
CPCI-204-1203
DPCI-154-1203
DPCI-204-1203
CPCI-154-1203M
CPCI-204-1203M
DPCI-154-1203M
DPCI-204-1203M
Connector
47 Pin Modular
38 Pin Modular
Input
Ac
Dc
Ac
Dc
Power
350 W
350 W
350 W
350 W
Model No.
CPCI-354T-1203
DPCI-354T-1203
CPCI-354-1203
DPCI-354-1203
DIN “M”
Ac
Dc
Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
CompactPCI
®
SYSTEM POWER SUPPLIES
CPCI SERIES
150 to 350 WATTS, AC INPUT WITH PFC, QUAD OUTPUT, HOT SWAP
SPECIFICATIONS
AC INPUT:
90-264 Vac continuous range, 47 to 63 Hz.
POWER FACTOR:
0.99 typical at full load. Meets EN61000-3-2.
INRUSH:
CPCI-154, 204 MODELS:
Cold start ac current is less than 15 A at
115 Vac, and 30 A at 230 Vac. Limited by thermistor.
CPCI-354 MODELS:
Cold start ac current is less than 30 A at
115 Vac, and 60 A at 230 Vac. Limited by thermistor.
BROWNOUT PROTECTION:
Holds regulation to 85 Vac
(30 seconds maximum)
HOLDUP TIME:
16 ms minimum after removal of power at full load.
10 ms minimum for CPCI 200s.
EFFICIENCY:
70% typical.
EMI: CONDUCTED RFI
Meets FCC Part 15, Subpart J, class B;
EN55022 class A; CISPR 22 class B.
All 150 W and 200 W models class A
FAIL# SIGNAL:
TTL compatible signal. Signal goes low
under the following conditions:
CPCI-154 & CPCI-204 Models (all connector types):
Outputs #1 or #2 fail; an overcurrent condition on outputs
#1, #2, or #3; an overtemperature shutdown; an overvoltage
shutdown; or an ac input failure (5ms warning before outputs
shutdown).
CPCI-354 & CPCI-354T Models:
Any of 4 outputs fail; an overtemperature shutdown; an
overvoltage shutdown; or an ac input failure (5ms warning
before outputs shut down).
Min. Load Maximum Output
on V1*
From V1 & V2
2.5 A
2.5 A
3.0 A
2.5 A
5.0 A
5.0 A
25 A
25 A
35 A
35 A
65 A
65 A
AC INPUT
Model
CPCI-154-1203
CPCI-154-1203M
CPCI-204-1203
CPCI-204-1203M
CPCI-354-1203
CPCI-354T-1203
Power
150 W
150 W
200 W
200 W
350 W
350 W
Output 1
5.0 V @ 25A
5.0 V @ 25 A
5.0 V @ 25 A
5.0 V @ 25 A
5.0 V @ 50 A
5.0 V @ 50 A
Output 2
3.3 V @ 20 A
3.3 V @ 20 A
3.3V @ 30 A
3.3 V @ 25 A
3.3 V @ 40 A
3.3 V @ 40 A
Output 3
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 12 A
12 V @ 12 A
Output 4
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 4 A
-12 V @ 4 A
*
For full output current capability on V2, V3, V4.
DPCI SERIES
150 to 350 WATTS, QUAD OUTPUT, 48 VDC INPUT, HOT SWAP
SPECIFICATIONS
DC INPUT:
36-72 Vdc
EFFICIENCY:
75% typical
FAIL# SIGNAL:
TTL compatible signal. Signal goes low under
the following conditions: Any of 4 outputs fail; an overtemperature
shutdown; or an overvoltage shutdown.
48 VDC INPUT
Model
DPCI-154-1203
DPCI-154-1203M
DPCI-204-1203
DPCI-204-1203M
DPCI-354-1203
DPCI-354T-1203
Power
150 W
150 W
200 W
200 W
350 W
350 W
Output 1
5 V @ 25 A
5 V @ 25 A
5 V @ 25 A
5 V @ 25 A
5 V @ 50 A
5 V @ 50 A
Output 2
3.3 V @ 20 A
3.3 V @ 20 A
3.3 V @ 30 A
3.3 V @ 25 A
3.3 V @ 40 A
3.3 V @ 40 A
Output 3
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 12 A
12 V @ 12 A
Output 4
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 4 A
-12 V @ 4 A
Min. Load Maximum Output
on V1*
From V1 & V2
2.5 A
2.5 A
3.0 A
2.5 A
5.0 A
5.0 A
25 A
25 A
35 A
35 A
65 A
65 A
*
For full output current capability on V2, V3, V4.
Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
CompactPCI
®
SYSTEM POWER SUPPLIES
GENERAL SPECIFICATIONS
OUTPUT
LINE & LOAD REGULATION:
± 2% over input range and 0 to 100% load change.
RIPPLE & NOISE
1% p-p or 50 mV, whichever is greater.
Measured at mating connector with 20 µF
REMOTE SENSE
Open sense lead protection
TEMPERATURE COEFFICIENT
(Outputs #1 and 2): 0.03% per degree centigrade
STABILITY
0.1% over 8 hours after 30 minutes warm-up.
TRANSIENT RESPONSE
(Outputs #1 and 2): Output voltage returns to within 1%
in less than 1 ms for a 50% load change. Peak transient
does not exceed 5%.
OVERVOLTAGE PROTECTION
(Outputs #1 and #2): Protects load against power supply
induced overvoltage. Trip-point is factory set so that
output voltage cannot exceed 136% of nominal. Input
power must be recycled to reset.
OVERLOAD PROTECTION
All outputs are protected against overload and short
circuit, Automatic recovery upon removal of fault.
DEG# SIGNAL :
TTL compatible signal. Signal goes low 20ºC before an
overtemperature shutdown.
FAIL LED :
Amber LED illuminates upon a failure condition as per
the CPCI and DPCI series specifications.
STATUS LED :
Green LED illuminates with no presence of any
failure condition.
REMOTE ENABLE
Contact closure to common turns on dc outputs.
Recessed pin for “make last, break first” connection.
REMOTE INHIBIT
Contact closure to the negative sense line or a TTL
level “0” turns off dc outputs.
REDUNDANCY
Built-in ORing diodes, slope program current sharing on
all outputs, and self aligning connector provide hot swap
and N+1 capabilities. Current sharing remains within
10% of the unit’s full output rating while units are in
thermal equilibrium.
REVERSE VOLTAGE
Protected against reverse voltage up to supply
current rating. except for reverse voltage on output #4
on CPCI-200.
ENVIRONMENTAL
COOLING
15 cfm, 400 lfm airflow required for cooling.
OUTPUT ISOLATION
Isolated from ground 50 Vdc (leakage current <20 µA)
THERMAL PROTECTION
Shuts down power supply if overheated.
Automatic recovery.
TEMPERATURE RANGE
0 to 40º centigrade at full ratings; derate 2.5%
per degree centigrade from 40º to 70º centigrade.
Unit will start up at -20º centigrade.
MISCELLANEOUS
SAFETY AGENCY APPROVALS
Models are approved to UL1950; CSA 22.2 #234;
IEC 950 and TUV EN60950, Class 1 SELV.,
CE 72/23/EEC/93/68EEC (low voltage directive).
GUARANTEED FOR 2 YEARS
Two year guarantee includes labor and parts.
Guarantee applies to operation at full published
specifications at the end of 2 years.
OPTIONS
LOW LEAKAGE
(CPCI Models only)
“L” option: Leakage current less than 0.5 mA per unit. Will
require additional filtering for compliance to EMI specifica-
tions.
MECHANICAL DIMENSIONS
CPCI-154, CPCI-204, DPCI-154 & DPCI-204 Models:
3U H x 8HP W, 160 mm board depth (see outline drawing).
Utilizes a 47 pin modular connector in accordance with
PICMG
®
Power Interface Specification 2.11.
CPCI-154M, CPCI-204M, DPCI-154M &
DPCI-204M Models:
3U H x 8HP W, 160 mm board depth (see outline drawing).
Utilizes a DIN “M” connector as referenced in the PICMG
®
Power Interface Specification 2.11.
CPCI-354, DPCI-354 Models:
6U H x 8HP W, 160 mm board depth (see outline drawing).
Utilizes a 38 pin modular connector as referenced in the
PICMG
®
Power Interface Specification 2.11.
CPCI-354T, DPCI-354T Models:
6U H x 8HP W, 160 mm board depth (see outline drawing).
Utilizes a 47 pin modular connector in accordance with
PICMG
®
Power Interface Specification 2.11.
Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
CompactPCI
®
SYSTEM POWER SUPPLIES
POWER SUPPLY PIN ASSIGNMENTS
Model: CPCI-354-1203
Connector: Positronics PCI38M400A1
Mating Connector: PCI38F300A1
Pin No.
Designation
Pin No.
1
+5 V
20
2
+5 V
21
3
+5 V
22*
4
+5 V
23
5
GND
24
6
GND
25*
7
GND
26
8
GND
27
9
GND
28*
10
GND
29
11
GND
30
12
GND
31
13
+3.3 V
32
14
+3.3 V
33
15
+3.3 V
34
16
+3.3 V
35
17
GND
36**
18
+12 V
37
19
Not Used
38
* Pins 22,25, and 28 are last mate, first break pins.
** Pin 36 is a first mate, last break pin.
Designation
Not Used
-12 V
GND
GND
+5 V Sense
Enable
Sense Return
+3.3 V Sense
Not Used
DEG#
+12 V Sense
Inhibit
Not Used
Not Used
Not Used
Fail #
Safety Ground
Ac Neutral
Ac Line
Model: DPCI-354-1203
Connector: Positronics PCI38M400A1
Mating Connector: PCI38F300A1
Pin No.
Designation
Pin No.
Designation
1
+5 V
20
Not Used
2
+5 V
21
-12 V
3
+5 V
22*
GND
4
+5 V
23
GND
5
GND
24
+5 V Sense
6
GND
25*
Enable
7
GND
26
Sense Return
8
GND
27
+3.3 V Sense
9
GND
28*
Not Used
10
GND
29
DEG#
11
GND
30
+12 V Sense
12
GND
31
Inhibit
13
+3.3 V
32
Not Used
14
+3.3 V
33
Not Used
15
+3.3 V
34
Not Used
16
+3.3 V
35
Fail #
17
GND
36**
Safety Ground
18
+12 V
37
-48 Vdc Input Return
19
Not Used
38
-48 Vdc Input
* Pins 22, 25, and 28 are last mate, first break pins.
** Pins 36 is a first mate, last break pin.
Model: CPCI-354T-1203
CPCI-154-1203
CPCI-204-1203
Connector: Positronics PCI47M400A1
Mating Connector: PCI47F300A1
Pin No.
Designation
Pin No.
1
+5 V
25
2
+5 V
26
3
+5 V
27*
4
+5 V
28
5
GND
29
6
GND
30
7
GND
31
8
GND
32
9
GND
33
10
GND
34
11
GND
35
12
GND
36
13
+3.3 V
37
14
+3.3 V
38
15
+3.3 V
39
16
+3.3 V
40
17
+3.3 V
41
18
+3.3 V
42
19
GND
43
20
+12 V
44
21
-12 V
45**
22
GND
46
23
Not Used
47
24
GND
* Pin 27 is a last mate, first break pin.
** Pin 45 is a first mate, last break pin.
Designation
Not Used
Not Used
Enable
Not Used
Not Used
+5 V Sense
Not Used
Not Used
+3.3 V Sense
Sense Return
Not Used
+12 V Sense
Not Used
DEG#
Inhibit
Not Used
Not Used
Fail #
Not Used
Not Used
Safety Ground
Ac Neutral
Ac Line
Model: DPCI-354T-1203
DPCI-154-1203
DPCI-204-1203
Connector: Positronics PCI47M400A1
Mating Connector: PCI47F300A1
Pin No.
Designation
Pin No.
1
+5 V
25
2
+5 V
26
3
+5 V
27*
4
+5 V
28
5
GND
29
6
GND
30
7
GND
31
8
GND
32
9
GND
33
10
GND
34
11
GND
35
12
GND
36
13
+3.3 V
37
14
+3.3 V
38
15
+3.3 V
39
16
+3.3 V
40
17
+3.3 V
41
18
+3.3 V
42
19
GND
43
20
+12 V Output
44
21
-12 V Output
45**
22
GND
46
23
Not Used
47
24
GND
* Pin 27 is a last mate, first break pin.
** Pin 45 is a first mate, last break pin.
Designation
Not Used
Not Used
Enable
Not Used
Not Used
+5 V Sense
Not Used
Not Used
+3.3 V Sense
Sense Return
Not Used
+12 V Sense
Not Used
DEG#
Inhibit
Not Used
Not Used
Fail #
Not Used
Not Used
Safety Ground
-48 Vdc Input Return
-48 Vdc Input
Model: CPCI-154-1203M
CPCI-204-1203M
Male Connector: DIN 41612 Type “M”
Mating Connector: ERNI #914374 or AMP#148370
Pin No.
A13
A14
A15
A16
A17
A18
A19
A20
B2
B5
B8
B11
B13
B14
B15
B16
Designation
Not Used
Inhibit
Not Used
Sense Return
+5 V Sense
+3.3 V Sense
+12 V Output
-12 V Output
Ac Line
Ac Neutral
Not Used
Chassis Ground
+3.3 V
+3.3 V
+3.3 V
+3.3 V
Pin No.
B17
B18
B19
B20
B22
B25
B28
B31
C13
C14
C15
C16
C17
C18
C19
C20
Designation
+3.3 V
+3.3 V
+12 V Output
-12 V Output
+5 V
GND
Not Used
Not Used
Enable
DEG#
Fail #
+3.3 V
+3.3 V
+3.3 V
+12 V Ouput
-12 V Ouput
Model: DPCI-154-1203M
DPCI-204-1203M
Male Connector: DIN 41612 Type “M”
Mating Connector: ERNI #914374 or AMP#148370
Pin No.
A13
A14
A15
A16
A17
A18
A19
A20
B2
B5
B8
B11
B13
B14
B15
B16
Designation
Not Used
Inhibit
Not Used
Sense Return
+5 V Sense
+3.3 V Sense
+12 V Output
-12 V Output
Not Used
Not Used
Not Used
Chassis Ground
+3.3 V
+3.3 V
+3.3 V
+3.3 V
Pin No.
B17
B18
B19
B20
B22
B25
B28
B31
C13
C14
C15
C16
C17
C18
C19
C20
Designation
+3.3 V
+3.3 V
+12 V Output
-12 V Output
+5 V
GND
-48 Vdc Input Return
-48 Vdc Input
Enable
DEG#
Fail #
+3.3 V
+3.3 V
+3.3 V
+12 V Output
-12 V Output
Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
CompactPCI
®
SYSTEM POWER SUPPLIES
MECHANICAL SPECIFICATIONS:
150-200 Watts
150-200 Watts
Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
京公网安备 11010802033920号
EEWORLD
