19-5376; Rev 2; 11/11
71M6541D/F/G and 71M6542F/G
Energy Meter ICs
DATA SHEET
GENERAL DESCRIPTION
The 71M6541D/71M6541F/71M6541G/71M6542F/71M6542G are
Teridian™ 4th-generation single-phase metering SoCs with a 5MHz
8051-compatible MPU core, low-power RTC with digital temperature
compensation, flash memory, and LCD driver. Our Single Converter
Technology® with a 22-bit delta-sigma ADC, three or four analog
inputs, digital temperature compensation, precision voltage reference,
and a 32-bit computation engine (CE) supports a wide range of
metering applications with very few external components.
The 71M6541/2 devices support optional interfaces to the Teridian
71M6x01 series of isolated sensors, which offer BOM cost reduction,
immunity to magnetic tamper, and enhanced reliability. Other
features include an SPI interface, advanced power management,
ultra-low-power operation in active and battery modes, 3/5KB shared
RAM and 32/64/128KB of flash memory that can be programmed in
the field with code and/or data during meter operation and the ability
to drive up to six LCD segments per SEG driver pin. High
processing and sampling rates combined with differential inputs offer
a powerful metering platform for residential meters.
A complete array of code development tools, demonstration code,
and reference designs enable rapid development and certification of
meters that meet all ANSI and IEC electricity metering standards
worldwide.
NEUTRAL
FEATURES
•
0.1% Accuracy Over 2000:1 Current Range
•
Exceeds IEC 62053/ANSI C12.20 Standards
•
Two Current Sensor Inputs with Selectable
Differential Mode
•
Selectable Gain of 1 or 8 for One Current Input to
Support Shunts
•
High-Speed Wh/VARh Pulse Outputs with
Programmable Width
•
32KB Flash, 3KB RAM (71M6541D)
•
64KB Flash, 5KB RAM (71M6541F/42F)
•
128KB Flash, 5KB RAM (71M6541G/42G)
•
Up to Four Pulse Outputs with Pulse Count
•
Four-Quadrant Metering
•
Digital Temperature Compensation:
-
Metrology Compensation
-
Accurate RTC for TOU Functions with
Automatic Temperature Compensation for
Crystal in All Power Modes
•
Independent 32-Bit Compute Engine
•
46-64Hz Line Frequency Range with the Same
Calibration
•
Phase Compensation (±10°)
•
Three Battery-Backup Modes:
-
Brownout Mode (BRN)
-
LCD Mode (LCD)
-
Sleep Mode (SLP)
•
Wake-Up on Pin Events and Wake-On Timer
•
1µA in Sleep Mode
•
Flash Security
•
In-System Program Update
BATTERY
Shunt
LOAD
LINE
Shunt
Note:
This system is referenced to LINE
NEUTRAL
LINE
POWER SUPPLY
Resistor Divider
TERIDIAN
71M6xx1
MUX and ADC
IAP
IAN
Pulse
Trans-
former
VA
IBP
IBN
VREF
SERIAL PORTS
V3P3A V3P3SYS GNDA GNDD
PWR MODE
CONTROL
LINE
TERIDIAN
71M6541D/F
WAKE-UP
REGULATOR
VBAT
VBAT_RTC
BATTERY
MONITOR
RTC
BATTERY
•
8-Bit MPU (80515), Up to 5 MIPS
•
Full-Speed MPU Clock in Brownout Mode
•
LCD Driver:
- Up to 6 Commons/Up to 56 Pins
•
5V LCD Driver with DAC
•
Up to 51 Multifunction DIO Pins
•
Hardware Watchdog Timer (WDT)
2
•
I C/MICROWIRE® EEPROM Interface
TEMPERATURE
SENSOR
RAM
COMPUTE
ENGINE
FLASH
MEMORY
COM0...5
SEG
SEG/DIO
LCD DRIVER
DIO, PULSES
DIO
LCD DISPLAY
AMR
TX
RX
MODUL- RX
ATOR TX
POWER FAULT
COMPARATOR
8888.8888
PULSES,
DIO
I
2
C or µWire
EEPROM
32 kHz
IR
MPU
RTC
TIMERS
ICE
V3P3D
OSCILLATOR/
PLL
XIN
XOUT
HOST
SPI INTERFACE
•
SPI Interface with Flash Program Capability
•
Two UARTs for IR and AMR
•
IR LED Driver with Modulation
•
Industrial Temperature Range
•
64-Pin (71M6541D/F/G) and 100-pin
(71M6542F/G) Lead(Pb)-Free LQFP Package
11/5/2010
Teridian is a trademark and Single Converter Technology is a registered trademark of
Maxim Integrated Products, Inc.
MICROWIRE is a registered trademark of National Semiconductor Corp.
Rev 2
1
71M6541D/F/G and 71M6542F/G Data Sheet
Table of Contents
1
2
Introduction ................................................................................................................................. 10
Hardware Description .................................................................................................................. 11
2.1 Hardware Overview............................................................................................................... 11
2.2 Analog Front End (AFE) ........................................................................................................ 12
2.2.1 Signal Input Pins ....................................................................................................... 14
2.2.2 Input Multiplexer ........................................................................................................ 15
2.2.3 Delay Compensation ................................................................................................. 19
2.2.4 ADC Pre-Amplifier ..................................................................................................... 20
2.2.5 A/D Converter (ADC) ................................................................................................. 20
2.2.6 FIR Filter ................................................................................................................... 20
2.2.7 Voltage References ................................................................................................... 20
2.2.8 71M6x01 Isolated Sensor Interface (Remote Sensor Interface).................................. 22
2.3 Digital Computation Engine (CE) ........................................................................................... 24
2.3.1 CE Program Memory ................................................................................................. 24
2.3.2 CE Data Memory ....................................................................................................... 24
2.3.3 CE Communication with the MPU .............................................................................. 25
2.3.4 Meter Equations ........................................................................................................ 25
2.3.5 Real-Time Monitor (RTM) .......................................................................................... 25
2.3.6 Pulse Generators ...................................................................................................... 27
2.3.7 CE Functional Overview ............................................................................................ 28
2.4 80515 MPU Core .................................................................................................................. 31
2.4.1 Memory Organization and Addressing ....................................................................... 31
2.4.2 Special Function Registers (SFRs) ............................................................................ 33
2.4.3 Generic 80515 Special Function Registers ................................................................ 34
2.4.4 Instruction Set ........................................................................................................... 36
2.4.5 UARTs ...................................................................................................................... 36
2.4.6 Timers and Counters ................................................................................................. 39
2.4.7 WD Timer (Software Watchdog Timer) ...................................................................... 40
2.4.8 Interrupts................................................................................................................... 40
2.5 On-Chip Resources............................................................................................................... 48
2.5.1 Physical Memory ....................................................................................................... 48
2.5.2 Oscillator ................................................................................................................... 50
2.5.3 PLL and Internal Clocks............................................................................................. 50
2.5.4 Real-Time Clock (RTC) ............................................................................................. 51
2.5.5 71M654x Temperature Sensor .................................................................................. 56
2.5.6 71M654x Battery Monitor........................................................................................... 57
2.5.7 UART and Optical Interface ....................................................................................... 58
2.5.8 Digital I/O and LCD Segment Drivers......................................................................... 59
2.5.9 EEPROM Interface .................................................................................................... 70
2.5.10 SPI Slave Port ........................................................................................................... 73
2.5.11 Hardware Watchdog Timer ........................................................................................ 78
2.5.12 Test Ports (TMUXOUT and TMUX2OUT Pins)........................................................... 78
Functional Description ................................................................................................................ 80
3.1 Theory of Operation .............................................................................................................. 80
3.2 Battery Modes....................................................................................................................... 81
3.2.1 BRN Mode ................................................................................................................ 83
3.2.2 LCD Mode ................................................................................................................. 83
3.2.3 SLP Mode ................................................................................................................. 84
Rev 2
3
2
71M6541D/F/G and 71M6542F/G Data Sheet
3.3
Fault and Reset Behavior ...................................................................................................... 85
3.3.1 Events at Power-Down .............................................................................................. 85
3.3.2 IC Behavior at Low Battery Voltage ........................................................................... 86
3.3.3 Reset Sequence ........................................................................................................ 86
3.3.4 Watchdog Timer Reset .............................................................................................. 86
3.4 Wake Up Behavior ................................................................................................................ 87
3.4.1 Wake on Hardware Events ........................................................................................ 87
3.4.2 Wake on Timer .......................................................................................................... 90
3.5 Data Flow and MPU/CE Communication ............................................................................... 91
Application Information ............................................................................................................... 92
4.1 Connecting 5 V Devices ........................................................................................................ 92
4.2 Direct Connection of Sensors ................................................................................................ 92
4.3 71M6541D/F/G Using Local Sensors..................................................................................... 93
4.4 71M6541D/F/G Using 71M6x01and Current Shunts .............................................................. 94
4.5 71M6542F/G Using Local Sensors ........................................................................................ 95
4.6 71M6542F/G Using 71M6x01 and Current Shunts................................................................. 96
4.7 Metrology Temperature Compensation.................................................................................. 97
4.7.1 Voltage Reference Precision ..................................................................................... 97
4.7.2 Temperature Coefficients for the 71M654x ................................................................ 97
4.7.3 Temperature Compensation for VREF with Local Sensors ......................................... 98
4.7.4 Temperature Compensation for VREF with Remote Sensor ....................................... 99
4.8 Connecting I
2
C EEPROMs .................................................................................................. 100
4.9 Connecting Three-Wire EEPROMs ..................................................................................... 101
4.10 UART0 (TX/RX) .................................................................................................................. 101
4.11 Optical Interface (UART1) ................................................................................................... 101
4.12 Connecting the Reset Pin.................................................................................................... 102
4.13 Connecting the Emulator Port Pins ...................................................................................... 102
4.14 Flash Programming ............................................................................................................. 104
4.14.1 Flash Programming via the ICE Port ........................................................................ 104
4.14.2 Flash Programming via the SPI Port ........................................................................ 104
4.15 MPU Firmware Library ........................................................................................................ 104
4.16 Crystal Oscillator ................................................................................................................. 104
4.17 Meter Calibration................................................................................................................. 104
Firmware Interface ..................................................................................................................... 105
5.1 I/O RAM Map –Functional Order ......................................................................................... 105
5.2 I/O RAM Map – Alphabetical Order ..................................................................................... 111
5.3 CE Interface Description ..................................................................................................... 125
5.3.1 CE Program ............................................................................................................ 125
5.3.2 CE Data Format ...................................................................................................... 125
5.3.3 Constants ................................................................................................................ 125
5.3.4 Environment ............................................................................................................ 126
5.3.5 CE Calculations....................................................................................................... 126
5.3.6 CE Front End Data (Raw Data)................................................................................ 127
5.3.7 FCE Status and Control ........................................................................................... 127
5.3.8 CE Transfer Variables ............................................................................................. 129
5.3.9 Pulse Generation..................................................................................................... 132
5.3.10 Other CE Parameters .............................................................................................. 134
5.3.11 CE Calibration Parameters ...................................................................................... 135
5.3.12 CE Flow Diagrams .................................................................................................. 136
Electrical Specifications ............................................................................................................ 138
3
4
5
6
Rev 2
71M6541D/F/G and 71M6542F/G Data Sheet
Absolute Maximum Ratings ................................................................................................. 138
Recommended External Components ................................................................................. 139
Recommended Operating Conditions .................................................................................. 139
Performance Specifications ................................................................................................. 140
6.4.1 Input Logic Levels ................................................................................................... 140
6.4.2 Output Logic Levels................................................................................................. 140
6.4.3 Battery Monitor ........................................................................................................ 141
6.4.4 Temperature Monitor ............................................................................................... 141
6.4.5 Supply Current ........................................................................................................ 142
6.4.6 V3P3D Switch ......................................................................................................... 143
6.4.7 Internal Power Fault Comparators ........................................................................... 143
6.4.8 2.5 V Voltage Regulator – System Power ................................................................ 143
6.4.9 2.5 V Voltage Regulator – Battery Power ................................................................. 144
6.4.10 Crystal Oscillator ..................................................................................................... 144
6.4.11 Phase-Locked Loop (PLL) ....................................................................................... 144
6.4.12 LCD Drivers ............................................................................................................ 145
6.4.13 VLCD Generator...................................................................................................... 146
6.4.14 VREF ...................................................................................................................... 148
6.4.15 ADC Converter ........................................................................................................ 149
6.4.16 Pre-Amplifier for IAP-IAN ......................................................................................... 150
6.5 Timing Specifications .......................................................................................................... 151
6.5.1 Flash Memory ......................................................................................................... 151
6.5.2 SPI Slave ................................................................................................................ 151
6.5.3 EEPROM Interface .................................................................................................. 151
6.5.4 RESET Pin .............................................................................................................. 152
6.5.5 RTC ........................................................................................................................ 152
6.6 Package Outline Drawings .................................................................................................. 153
6.6.1 64-Pin LQFP Outline Package Drawing ................................................................... 153
6.6.2 100-Pin LQFP Package Outline Drawing ................................................................. 154
6.7 Package Markings .............................................................................................................. 155
6.8 Pinout Diagrams ................................................................................................................. 156
6.8.1 71M6541D/F/G LQFP-64 Package Pinout ............................................................... 156
6.8.2 71M6542F/G LQFP-100 Package Pinout ................................................................. 157
6.9 Pin Descriptions .................................................................................................................. 158
6.9.1 Power and Ground Pins........................................................................................... 158
6.9.2 Analog Pins ............................................................................................................. 159
6.9.3 Digital Pins .............................................................................................................. 160
6.9.4 I/O Equivalent Circuits ............................................................................................. 162
7
Ordering Information ................................................................................................................. 163
7.1 71M6541D/F/G and 71M6542F/G ....................................................................................... 163
8
Related Information ................................................................................................................... 163
9
Contact Information ................................................................................................................... 163
Appendix A: Acronyms ..................................................................................................................... 164
Appendix B: Revision History ........................................................................................................... 165
6.1
6.2
6.3
6.4
4
Rev 2
71M6541D/F/G and 71M6542F/G Data Sheet
Figures
Figure 2. 71M6541D/F/G AFE Block Diagram (Local Sensors) ............................................................... 12
Figure 3. 71M6541D/F/G AFE Block Diagram with 71M6x01.................................................................. 13
Figure 4. 71M6542F/G AFE Block Diagram (Local Sensors) .................................................................. 13
Figure 5. 71M6542F/G AFE Block Diagram with 71M6x01 ..................................................................... 14
Figure 6: States in a Multiplexer Frame (MUX_DIV[3:0] = 3) .................................................................. 17
Figure 7: States in a Multiplexer Frame (MUX_DIV[3:0] = 4) .................................................................. 17
Figure 8: General Topology of a Chopped Amplifier ............................................................................... 21
Figure 9: CROSS Signal with
CHOP_E
= 00........................................................................................... 21
Figure 10: RTM Timing .......................................................................................................................... 26
Figure 11: Timing relationship between ADC MUX, CE, and RTM Serial Transfer .................................. 26
Figure 12. Pulse Generator FIFO Timing ............................................................................................... 28
Figure 13: Accumulation Interval ............................................................................................................ 29
Figure 14: Samples from Multiplexer Cycle (MUX_DIV[3:0] = 3)............................................................. 30
Figure 15: Samples from Multiplexer Cycle (MUX_DIV[3:0] = 4)............................................................. 30
Figure 16: Interrupt Structure ................................................................................................................. 47
Figure 17: Automatic Temperature Compensation ................................................................................. 54
Figure 18: Optical Interface.................................................................................................................... 58
Figure 19: Optical Interface (UART1) ..................................................................................................... 59
Figure 20: Connecting an External Load to DIO Pins ............................................................................. 60
Figure 21: LCD Waveforms ................................................................................................................... 68
Figure 22: 3-wire Interface. Write Command, HiZ=0. ............................................................................. 72
Figure 23: 3-wire Interface. Write Command, HiZ=1 .............................................................................. 72
Figure 24: 3-wire Interface. Read Command. ........................................................................................ 72
Figure 25: 3-Wire Interface. Write Command when CNT=0 ................................................................... 73
Figure 26: 3-wire Interface. Write Command when HiZ=1 and WFR=1. ................................................. 73
Figure 27: SPI Slave Port - Typical Multi-Byte Read and Write operations.............................................. 75
Figure 28: Voltage, Current, Momentary and Accumulated Energy......................................................... 80
Figure 29: Operation Modes State Diagram ........................................................................................... 81
Figure 30: MPU/CE Data Flow ............................................................................................................... 91
Figure 31: Resistive Voltage Divider (Voltage Sensing) .......................................................................... 92
Figure 32. CT with Single-Ended Input Connection (Current Sensing) .................................................... 92
Figure 33: CT with Differential Input Connection (Current Sensing) ........................................................ 92
Figure 34: Differential Resistive Shunt Connections (Current Sensing)................................................... 92
Figure 35. 71M6541D/F/G with Local Sensors ....................................................................................... 93
Figure 36: 71M6541D/F/G with 71M6x01 isolated Sensor ...................................................................... 94
Figure 39: I
2
C EEPROM Connection.................................................................................................... 101
Figure 40: Connections for UART0 ...................................................................................................... 101
Figure 41: Connection for Optical Components .................................................................................... 102
Figure 42: External Components for the RESET Pin: Push-Button (Left), Production Circuit (Right) ......... 102
Figure 43: External Components for the Emulator Interface ................................................................. 103
Figure 44: CE Data Flow: Multiplexer and ADC .................................................................................... 136
Figure 45: CE Data Flow: Scaling, Gain Control, Intermediate Variables .............................................. 136
Figure 46: CE Data Flow: Squaring and Summation Stages ................................................................. 137
Figure 47: 64-pin LQFP Package Outline ............................................................................................. 153
Figure 48: 100-pin LQFP Package Outline ........................................................................................... 154
Figure 49. Package Markings (Examples) ............................................................................................ 155
Figure 50: Pinout for the 71M6541D/F/G (LQFP-64 Package) .............................................................. 156
Figure 52: I/O Equivalent Circuits......................................................................................................... 162
Rev 2
5
ARM Technology
京公网安备 11010802033920号
EEWORLD
