PIC16F724T-I/P datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> PIC16F724T-I/P

PIC16F724T-I/P: Description8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP40; CategoryThe embedded processor and controller Microcontrollers and processors; File Size3MB，282 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

PIC16F724T-I/P Overview

8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP40

PIC16F724T-I/P Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	DIP
package instruction	0.600 INCH, ROHS COMPLIANT, PLASTIC, DIP-40
Contacts	40
Reach Compliance Code	compli
Has ADC	YES
Address bus width
bit size	8
maximum clock frequency	20 MHz
DAC channel	NO
DMA channel	NO
External data bus width
JESD-30 code	R-PDIP-T40
JESD-609 code	e3
length	51.7525 mm
Number of I/O lines	36
Number of terminals	40
On-chip program ROM width	14
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	DIP
Package shape	RECTANGULAR
Package form	IN-LINE
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Certification status	Not Qualified
RAM (bytes)	192
rom(word)	4096
ROM programmability	FLASH
Maximum seat height	6.35 mm
speed	20 MHz
Maximum supply voltage	5.5 V
Minimum supply voltage	2.3 V
Nominal supply voltage	3.3 V
surface mount	NO
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	MATTE TIN
Terminal form	THROUGH-HOLE
Terminal pitch	2.54 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	NOT SPECIFIED
width	15.24 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

Preview

Download Datasheet

View All

PIC16(L)F722/3/4/6/7

28/40/44-Pin Flash Microcontrollers with XLP Technology

Devices Included In This Data Sheet:

PIC16F722/3/4/6/7 Devices:

• PIC16F722

• PIC16F723

• PIC16F724

PIC16LF722/3/4/6/7 Devices:

• PIC16LF722

• PIC16LF723

• PIC16LF724

• PIC16LF726

• PIC16LF727

• PIC16F726

• PIC16F727

Extreme Low-Power Management

PIC16LF722/3/4/6/7 with XLP:

• Sleep Mode: 20 nA

• Watchdog Timer: 500 nA

• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:

• A/D Converter:

- 8-bit resolution and up to 14 channels

- Conversion available during Sleep

- Selectable 1.024/2.048/4.096V voltage

reference

• On-chip 3.2V Regulator (PIC16F722/3/4/6/7

devices only)

High-Performance RISC CPU:

• Only 35 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 20 MHz oscillator/clock input

- DC – 200 ns instruction cycle

• Up to 8K x 14 Words of Flash Program Memory

• Up to 368 Bytes of Data Memory (RAM)

• Interrupt Capability

• 8-Level Deep Hardware Stack

• Direct, Indirect and Relative Addressing modes

• Processor Read Access to Program Memory

• Pinout Compatible to other 28/40-pin PIC16CXXX

and PIC16FXXX Microcontrollers

Peripheral Highlights:

• Up to 35 I/O Pins and One Input-only Pin:

- High-current source/sink for direct LED drive

- Interrupt-on-pin change

- Individually programmable weak pull-ups

• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

• Enhanced Timer1:

- Dedicated low-power 32 kHz oscillator

- 16-bit timer/counter with prescaler

- External Gate Input mode with Toggle and

Single Shot modes

- Interrupt-on-gate completion

• Timer2: 8-Bit Timer/Counter with 8-Bit Period

• Two Capture, Compare, PWM (CCP) Modules:

- 16-bit Capture, max. resolution 12.5 ns

- 16-bit Compare, max. resolution 200 ns

- 10-bit PWM, max. frequency 20 kHz

• Addressable Universal Synchronous

Asynchronous Receiver Transmitter (AUSART)

• Synchronous Serial Port (SSP):

- SPI (Master/Slave)

- I

C (Slave) with Address Mask

• mTouch

Sensing Oscillator Module:

- Up to 16 input channels

Special Microcontroller Features:

• Precision Internal Oscillator:

- 16 MHz or 500 kHz operation

- Factory calibrated to ±1%, typical

- Software tunable

- Software selectable ÷1, ÷2, ÷4 or ÷8 divider

• 1.8V-5.5V Operation – PIC16F722/3/4/6/7

• 1.8V-3.6V Operation – PIC16LF722/3/4/6/7

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Brown-out Reset (BOR):

- Selectable between two trip points

- Disable in Sleep option

• Programmable Code Protection

• In-Circuit Serial Programming

(ICSP

) via Two

Pins

• Multiplexed Master Clear with Pull-up/Input Pin

• Industrial and Extended Temperature Range

• High-Endurance Flash Cell:

- 1,000 write Flash endurance (typical)

- Flash retention: > 40 years

• Power-Saving Sleep mode



2007-2015 Microchip Technology Inc.

DS40001341F-page 1

Recommended Resources

CMOS line receiver

Torque motor driving welding electrode circuit

Huicheng FS-40 floor fan circuit diagram

Negative voltage to positive voltage conversion circuit diagram 1

Connect a circuit that lights 6 LEDs sequentially

Automatic air freshener circuit

Why does the Quartus II 10.1 synthesis result use 0 cells?: Why does the result of Quartus II 10.1 synthesis use 0 units? There is no error, I can see the RTL view and the synthesized network device has been selected. There is a prompt saying that the clock is...; ssawee FPGA/CPLD

ADI Experimental Circuit CN0197 Battery Management System Based on AD7280A Phase II Report: It has been more than a week since I last reported on the progress of my work. During this week, the first surprise was the delivery of the samples. The sample AD7280A I applied for is difficult to bu...; sjl2001 ADI Reference Circuit

DM642 audio port McASP problem: I recently learned about TMS320DM642 and used the McASP audio port to send data to the data port of TLV320AIC23B. There was no error in the process of configuring the register of AIC23B through the I2...; RenYbin DSP and ARM Processors

Using LM2903 to complete 3.3V and 5V level conversion [Figure]: The OC gate structure of LM2903 is used to complete the level conversion circuit between 3.3V and 5V. The 3.3V DSP serial port needs to communicate with the 5V CMOS device (camera), and a level conver...; 呱呱 MCU

One design for many systems: Reinvented ultrasound system design: [i=s]This post was last edited by dontium on 2015-1-23 13:18[/i]By Xiaochen Xu , Harish Venkataraman and Anand Udupa , Texas InstrumentsKeywords: Ultrasound, Medical, Analog Front End, AFE , AFE5805 ,...; 德州仪器 Analogue and Mixed Signal

Draw a process flow chart for the production of a DC regulated power supply.: [i=s]This post was last edited by Electronic Xiaobai 2 on 2020-3-25 09:34[/i]Please help me draw a process flow chart for the production of DC regulated power supply....; 电子小白2 Integrated technical exchanges

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components