(for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering.
R50E12.pdf 02.9.5
Trimmer Potentiometers
SMD Sealed Type 3mm Size PVG3 Series
3.6
s
Features
1. Sealed construction protects the internal from dust
and liquid, which achieves stable performance.
2. Driver plate with cross-slot is suitable for
automatic adjustment.
3. Rotor with large diameter and deep groove improves
driver insertion.
4. Regarding the terminal shape, both J-lead and gull
wing type are available as standard ones.
5. 3mm and 4mm land pattern can be used without change.
(Gull wing is suitable for 4mm size land pattern.)
6. Heat resistance performance enables high
temperature peak re-flow soldering.
7. The lead terminals are plated with Sn, which
achieves Pb free.
#2
0.45
0.4 Depth
2.2 Dia.
2.0
3.4
0.1 Min.
#3
2.3
#1
0.6
1.00±0.15
3.6
2.7
#2
#1
CLOCKWISE
0.75±0.15
mm
(
Tolerancein
±0.3
)
:
#3
PVG3A
3.6
0.45
0.4 Depth
2.2 Dia.
2.0
4
#2
3.4
0.1 Min.
s
Applications
1. Small sensors
2. Optical Transceiver Module
3. Copier
4. Printer
5. Compact Power Supply 6. Wireless Radio module
PVG3G
#3
2.3
#1
1.00±0.15
4.5
2.7
#2
#1
CLOCKWISE
0.75±0.15
mm
(
Tolerance in
±0.3
)
:
#3
3.6
1.1
#2
0.1 min. 0.1 min.
2.8
2.2Dia.
0.5
(2.5)
2.0
5.6
2.8
3.4
#3
0.8±0.2
2.3
#2
#1
#1
0.5
0.55 Depth
0.5
0.5
#3
PVG3K
CLOCKWISE
mm
(
Tolerance in
±0.3
)
:
Part Number
PVG3p100A01
PVG3p200A01
PVG3p500A01
PVG3p101A01
PVG3p201A01
PVG3p501A01
PVG3p102A01
PVG3p202A01
PVG3p502A01
PVG3p103A01
PVG3p203A01
PVG3p503A01
Power Rating
(W)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
Soldering Method
Reflow
Reflow
Reflow
Reflow
Reflow
Reflow
Reflow
Reflow
Reflow
Reflow
Reflow
Reflow
Number of Turns
(Effective Rotation Angle)
1(210°±10°)
1(210°±10)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
Total Resistance Value
10ohm
±20%
20ohm
±20%
50ohm
±20%
100ohm
±20%
200ohm
±20%
500ohm
±20%
1k ohm
±20%
2k ohm
±20%
5k ohm
±20%
10k ohm
±20%
20k ohm
±20%
50k ohm
±20%
TCR
(ppm/°C)
±250
±250
±250
±250
±100
±100
±100
±100
±100
±100
±100
±100
Continued on the following page.
24
Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering.
R50E12.pdf 02.9.5
Continued from the preceding page.
Part Number
PVG3p104A01
PVG3p204A01
PVG3p504A01
PVG3p105A01
PVG3p205A01
Power Rating
(W)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
Soldering Method
Reflow
Reflow
Reflow
Reflow
Reflow
Number of Turns
(Effective Rotation Angle)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
Total Resistance Value
100k ohm
±20%
200k ohm
±20%
500k ohm
±20%
1M ohm
±20%
2M ohm
±20%
TCR
(ppm/°C)
±100
±100
±100
±100
±100
The blank column is filled with the code of adjustment direction and lead type A (top, J-hook), G (top, gull-wing), or K (rear).
s
Construction
PVG3A/PVG3G
Rotor
Cover
Rotor
PVG3K
#2-Terminal
Case
2
M
Cover
#2-Terminal
2
Case
M
#3-Terminal
#3-Terminal
Wiper
Ceramic
Substrate
#1-Terminal
O-Ring
Resistive
Element
Wiper
Ceramic
Substrate
#1-Terminal
O-Ring
Resistive
Element
4
s
Standard Land Pattern
PVG3A
0.9
1.4
PVG3G
1.3
1.4
2.1
2.1
0.9
1.1
1.2
1.1
mm
(
Tolerancein
±0.1
)
:
1.1
1.2
1.1
1.3
mm
(
Tolerancein
±0.1
)
:
Continued on the following page.
.2.5
.2.5
25
Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering.
R50E12.pdf 02.9.5
Continued from the preceding page.
s
Standard Land Pattern
PVG3K
1.5
1.0
1.2
1.1
1.2
mm
(
Tolerance in
±0.1
)
:
s
Characteristics
Temperature Cycle
∆TR
∆TR
±2%
±2%
10Mohm min.
±1%
±1%
±3%
or 3ohm max.,
whichever is greater
∆V.S.S ±1%
Low Temperature Exposure
High Temperature Exposure
Rotational Life (50cycles)
∆TR
∆TR
∆TR
±2%
±3%
±3%
or 2ohm max.,
whichever is greater
∆TR
: Total Resistance Change
∆V.S.S
: Voltage Setting Stability
IR
: Insulation ResistanceR
∆V.S.S ±1%
∆V.S.S ±1%
IR
∆TR
∆TR
∆TR
4
Humidity
Vibration (20G)
Shock (100G)
∆V.S.S ±1%
∆V.S.S ±1%
Temperature Load Life
∆V.S.S ±2%
∆V.S.S ±2%
26
1.0
3.1
3.1
Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering.
R50E12.pdf 02.9.5
PVG3 Series Notice
s
Notice (Operating and Storage Conditions)
1. Store that the temperature is -10 to +40deg. C and
the relative humidity is 30-85%RH.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. The trimmer potentiometer should not be used under
the following environmental conditions:
If you use the trimmer potentiometer in an
environment other these listed below, please
consult with Murata factory representative prior to
using.
(1) Corrosive gaseous atmosphere.
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxie gas, etc.)
(2) In liquid.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere.
(4) Direct sunlight.
(5) Static voltage nor electric/magnetic fields.
(6) Direct sea breeze.
(7) Other variations of the above.
s
Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depend on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P•R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
4
s
Notice (Soldering and Mounting)
1. Soldering
(1) Standard soldering condition
(a) Reflow soldering :
Refer to the standard temperature profile.
(b) Soldering iron
Temperature of tip : 260deg. C max.
Soldering time
: 3sec. max.
Diameter of tip
: 2mm dia. max.
Wattage of iron
: 30W max.
Before using other soldering conditions more
than those listed above, please consult with
Murata factory representative prior to using.
If the soldering conditions are not
suitable,e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
(2) Can not be soldered using the flow soldering
method. If you use the flow soldering method,
the trimmer potentiometer may not function.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
(4) Apply the appropriate amount of solder paste.
If the amount of solder paste applied to the
land is insufficient, the required adhesive
strength cannot be obtained. If an excessive
amount of solder paste is applied, solder
bridging or flux overflow to the resistive
element surface can occur.
2. Mounting
(1) Use our standard land dimension. Excessive land
area causes displacement due to effect of the
surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(2) Do not apply excessive force (preferable 4.9N
(Ref.; 500gf) max.), when the trimmer
potentiometer is mounted to the PCB.
(3) Do not warp and/or bend PC board to prevent
trimmer potentiometer from breakage.
(4) In chip placers, the size of the cylindrical
pick-up nozzle should be outer dimension
2.5-2.8mm dia. and inner dimension
2.0-2.5mm dia..
3. Cleaning
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvent for cleaning. If you use any
other types of solvents, please consult with
Murata factory representative prior to using.
(2) Less than 3 minutes of total cleaning time by
dipping, vapor and ultra-sonic method.
(3) In case of ultra-sonic cleaning method, cleaning
condition should be as follows.
(a) Power
: 600W (67lit.) max.
(b) Frequency : 28kHz
(c) Temperature : Ambient temperature
Due to ultra-sonic cleaning equipment peculiar
self resonance point and cleaning compatibility
usually depends on the jig construction and/or
Continued on the following page.
27
Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering.
R50E12.pdf 02.9.5
PVG3 Series Notice
Continued from the preceding page.
the cleaning condition such as the depth of
immersion, please check the cleaning equipment
to determine the suitable conditions.
If the condition is not suitable, the trimmer
potentiometer may deviate from specified
characteristics.
s
Reflow Soldering Standard Profile
For reflow soldering
Pre-heating(in the air)
230
Temperature (°C)
200
Soldering
Gradual Cooling
(in the air)
100
0
60~120 sec.
30 sec. max.
(Melting zone)
Time
4
s
Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
* Recommended screwdriver for manual adjustment
TORAY INDUSTRIES, INC. : SA-2225
(Murata P/N : KMDR070)
* Recommended screwdriver bit for automatic
adjustment
TORAY INDUSTRIES, INC. : JB-2225
(Mutata P/N : KMBT070)
We can supply above screwdrivers.
If you place order, please nominate Murata P/N.
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
and stress after mounted onto PCB to prevent
contact intermittence.
3. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401series").
s
Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
Answer: Since the RS-232-C interface standard appeared earlier, it is inevitable that there are some shortcomings, mainly the following four points: (1) The signal level value of the interface is high...
I am from the Cyclone Digital Department. Our website is http://www.cyclone.com.cn . It has not been established for a long time. I would like to make a cross-link with your website to promote each ot...
The parallel port emulator should be set up in the working mode of the computer parallel port.Please find a good board to compare the operation, it is easier to find the problem.If there are still pro...
May I ask where you guys have your boards SMTed? Are there any SMT factories in the Pearl River Delta that specialize in making prototypes and small batches? They can process small-size BGA (0.5 pitch...
[i=s]This post was last edited by littleshrimp on 2015-6-18 13:29[/i] [size=3]I have encountered the situation where the DCO program of MSP430FR5969 runs wild if it is configured as 16MHz before. I en...
introduction
Since the beginning of the 21st century, the world of information has changed rapidly. Maybe a high-tech product will be released today and a better similar product will be releas...[Details]
Microchip's PIC18F46J50 is a low-power, high-performance 8-bit USB microcontroller (MCU) using nanoWatt XLP technology. The current in deep sleep mode can be as low as 13nA, the operating voltage i...[Details]
1 Introduction
The high temperature tester is mainly used for temperature tracking measurement and data acquisition during the heating process. By systematically analyzing the test data, the...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
1 Introduction
With the acceleration of the pace of urban modernization, society has higher requirements for urban road lighting and urban lighting projects. The state has clearly required tha...[Details]
Two simple circuits are implemented to drive two LEDs from a battery powered microprocessor.
This design is based on a circuit that uses three resistors and a microprocessor I/O pin as an input h...[Details]
1. Introduction
With the gradual automation and modernization of industrial control systems, fieldbus control systems have received more and more attention and application. CAN bus is currentl...[Details]
Microcalorimetry
is used to determine energy relationships. Microcalorimetry techniques are often required when performing calorimetric experiments with small sample sizes or slow heating rat...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
1 Introduction
The Third Steel Plant of Jigang Group is a key investment project of Jigang Group during the "15th Five-Year Plan". It has introduced first-class domestic and foreign advanced eq...[Details]
This week, Microsoft held its 2012 Microsoft Worldwide Partner Conference (WPC) in Toronto, Canada. At the conference, Microsoft showed its new products and services to partners around the world. A...[Details]
Today, with energy becoming increasingly scarce, the utilization of natural energy has become the focus of people's attention. Among various natural energies, the endless solar energy is highly fav...[Details]
introduction
LEDs continue to gain popularity in automotive applications, thanks to their long lifespan and the flexibility they offer for body styling and interior design. Some may be surpris...[Details]
store
To prevent moisture, LEDs should be stored in a dry and ventilated environment with a storage temperature of -40°C to +100°C and a relative humidity below 85%.
The LED should be use...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
