Flash, 512MX1, PDSO16, 300 MIL, LEAD FREE, MS-013AA, SOIC-16
S70FL512SAGMFI010 Parametric
Parameter Name
Attribute value
Maker
SPANSION
Parts packaging code
SOIC
package instruction
SOP,
Contacts
16
Reach Compliance Code
unknow
ECCN code
EAR99
Maximum clock frequency (fCLK)
133 MHz
JESD-30 code
R-PDSO-G16
length
10.3 mm
memory density
536870912 bi
Memory IC Type
FLASH
memory width
1
Number of functions
1
Number of terminals
16
word count
536870912 words
character code
512000000
Operating mode
SYNCHRONOUS
Maximum operating temperature
85 °C
Minimum operating temperature
-40 °C
organize
512MX1
Package body material
PLASTIC/EPOXY
encapsulated code
SOP
Package shape
RECTANGULAR
Package form
SMALL OUTLINE
Parallel/Serial
SERIAL
Programming voltage
3 V
Maximum seat height
2.65 mm
Maximum supply voltage (Vsup)
3.6 V
Minimum supply voltage (Vsup)
2.7 V
Nominal supply voltage (Vsup)
3 V
surface mount
YES
technology
CMOS
Temperature level
INDUSTRIAL
Terminal form
GULL WING
Terminal pitch
1.27 mm
Terminal location
DUAL
width
7.5 mm
S70FL512SAGMFI010 Preview
S70FL512S
512 Mbit (64 Mbyte)
MirrorBit
®
Flash Non-Volatile Memory
CMOS 3.0-Volt Core Serial Peripheral Interface with Multi-I/O
Data Sheet
(Advance Information)
S70FL512S Cover Sheet
Notice to Readers:
This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See
Notice On Data Sheet Designations
for definitions.
Publication Number
S70FL512S_00
Revision
01
Issue Date
September 8, 2011
D a t a
S h e e t
( A d va n c e
I n fo r m a t i o n )
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or V
IO
range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
2
S70FL512S
S70FL512S_00_01 September 8, 2011
S70FL512S
512 Mbit (64 Mbyte)
MirrorBit
®
Flash Non-Volatile Memory
CMOS 3.0-Volt Core Serial Peripheral Interface with Multi-I/O
Data Sheet
(Advance Information)
Features
Density
– 512 Mbits (64 Mbytes)
Security features
– One Time Program (OTP) array of 1024 bytes
– Block Protection:
– Status Register bits to control protection against program or
erase of a contiguous range of sectors.
– Hardware and software control options
– Advanced Sector Protection (ASP)
– Individual sector protection controlled by boot code or password
Serial Peripheral Interface (SPI)
– SPI Clock polarity and phase modes 0 and 3
– Extended Addressing: 24- or 32-bit address options
– Serial Command set and footprint compatible with S25FL-A,
S25FL-K, and S25FL-P SPI families
– Multi I/O Command set and footprint compatible with
S25FL-P SPI family
READ Commands
– Normal, Fast, Dual, and Quad
– AutoBoot - power up or reset and execute a Normal or Quad read
command automatically at a preselected address
– Common Flash Interface (CFI) data for configuration information.
Spansion
®
65 nm MirrorBit Technology with Eclipse
™
Architecture
Core Supply Voltage: 2.7V to 3.6V
Temperature Range:
– Industrial (-40
°
C to +85
°
C)
Programming (1.5 Mbytes/s)
– 256 or 512 Bytes Page Programming buffer options
– Quad-Input Page Programming (QPP) for slow clock systems
Packages (all Pb-free)
– 16-lead SOIC (300 mil)
– BGA-24 6 x 8 mm
– 5 x 5 ball (FAB024) configuration
Erase (0.5 to 0.65 Mbytes/s)
– Uniform sector configuration - always erase 256-kbytes blocks for
software compatibility with higher density and future devices.
– 100,000 Program-Erase Cycles on any sector typical
– 20 Year Data Retention typical
General Description
This document contains information for the S70FL512S device, which is a dual die stack of two S25FL256S die. For detailed
specifications, please refer to the discrete die data sheet:
Document
S25FL128S and S25FL256S Data Sheet
Publication Identification Number (PID)
S25FL128S_256S_00
Publication Number
S70FL512S_00
Revision
01
Issue Date
September 8, 2011
This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in
this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.
[i=s]This post was last edited by cjwmusic on 2022-6-21 04:09[/i]OverviewSuccessive approximation method
12-bit resolution (configurable to 12, 10, 8, 6 bits)
Watchdog detection
16 external channels, ...
As the first person to post in the Hercules section, I have to post some information! Here's some introductory content, because many people probably don't know what it is. [b]What is Hercules?[/b]Herc...
I would like to ask all the experts, how can I use DeviceEmulatorBSP.msi to make the SDK I need and include the simulator? I found some information on the Internet, but the SDK I made cannot pop up th...
[font=微软雅黑][size=4]Newspapers are on sale, newspapers are on sale, the list of winners of the Keysight Technology registration lucky draw is here. [/size][/font][font=微软雅黑][size=4]During the event, on...
1. Overview1.1 Analysis of ZigBee stack architectureThe ZigBee stack is built on the IEEE 802.15.4 standard, which defines the MAC and PHY layers of the protocol. ZigBee devices should include the PHY...
Guangdong Traffic Regulation No. 355
To all municipal transportation bureaus (commissions) above the prefecture level, provincial transportation groups, Guangdong Power Grid Compa...[Details]
Recently, the Provincial Development and Reform Commission and the Provincial Poverty Alleviation Office jointly organized the application for a number of centralized photovoltaic poverty alleviation ...[Details]
I have always wanted to write some posts and blogs, but I just couldn't bear to do it as I just graduated. After some preparation, I decided to write down some of the things I learned in the past few...[Details]
1. Determination of STM32 ADC sampling frequency 1. First, read some information to determine the ADC clock: (1) The ADCCLK clock provided by the clock controller is synchronized with the PCLK2 (A...[Details]
According to MEMS Consulting, Japan's
Toshiba
will further develop its automotive
LiDAR
(laser radar) semiconductor business, mainly focusing on: (1)
light receiving elements use...[Details]
Time flies. Since the beginning of 2018, news related to home appliance companies have repeatedly made headlines, and competition in the home appliance market continues to intensify. In order to be...[Details]
According to foreign media reports, the 2018 GMC Terrain Denali is equipped with multiple collision detection systems, and a recent test verified the safety of the system. Even when driving in a bu...[Details]
I am going to do a project recently, which requires counting the frequency and duty cycle of the external PWM signal. The chip used is STM32F207 Looking at the datasheet, I found that one of the ma...[Details]
The watchdog timer is used to prevent the program from running away due to strong interference noise caused by power supply, space electromagnetic interference or other reasons. Many microcontrollers...[Details]
Kevin Jensen ams Semiconductor
Sensors
and lighting expert. Let's learn more about the relevant content with the network communication editor.
Everything is becoming "smart" these ...[Details]
As the brain of a mobile phone, the mobile phone processing chip is of great importance. Xiaomi, which started out as the MIUI company, has long been keenly aware of the gap between China and devel...[Details]
In 1949, after three years of civil war, the Nationalist government was defeated and retreated to Taiwan. The political and academic circles launched a large-scale reflection on why they failed in ...[Details]
Making a digital sampling oscilloscope has been my long-standing wish, but after all, this goal is quite difficult, and there are too many aspects involved, such as analog front-end circuit, high-spe...[Details]
When STM32 uses JTMS (PA13) and JTCK (PA14) as normal I/O ports, add the following code before initialization (the order cannot be reversed): RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); G...[Details]
The code for using timer 0 to implement a running light in a 51 MCU is as follows. The LED light is connected to port P1. The code is annotated below, so I won't explain it in detail. My English is n...[Details]
GD32 MCU
京公网安备 11010802033920号
EEWORLD
