C&K Connector Specification CS FR022, amendment to the ESCC Generic Specification n° 3401, for low cost products manufactured :
- in the same ESA qualified site
- through the same manufacturing and control processes
- with the same piece parts
- with lighter controls, documentation and traceability
Applications : Engineering models, ground equipments, testing, some flight equipments (no need for high requirements).
The connectors and accessories, supplied according to these 2 quality levels, are totally compatible, interchangeable, and intermateable, as they are
manufactured with the same piece parts (except the cables), in the same ESA qualified site.
Connector Styles
Description of the 3 Connector Styles proposed for the Space applications (Combinations of Configurations and Quality Levels).
Connector Style
Space ESA
Space FR022
Standard FR022
Configuration
ESA
ESA
Standard
Quality Level
ESA
FR022
FR022
Configuration characteristics.
Accessories
Cavity filled with epoxy
Guide Posts
Polarization key
Latching (even number of cavities)
Latching (odd number of cavities)
Configuration ESA
1 & N (mandatory)
2 & N-1 (mandatory)
3 to N-2 (option)
N/2 (option)
N/2 – 1 (option)
Configuration Standard
N.A.
1 & N (option)
1 to N (option)
N/2 (option)
N/2 – 1 (option)
Dimensions are shown in mm (inch)
Dimensions subject to change
137
Microminiature Connectors Type MTB1 Space
Performance Specifications
Operating Temperature range
Storage Temperature range
Working Voltage
(between contacts and contact and shell)
Rated Current
Insulation Resistance (500 V DC)
Voltage Proof
Contact Retention in insert
Engagement / Separation Forces
(Male Contacts)
-55°C / +125°C (-67°F / +257°F)
-55°C / +125°C (-67°F / +257°F)
Sea level
150 Vrms
33000 m (108240 feet) altitude
100 Vrms
AWG 26 Wire
2,5 A max.
AWG 28 Wire
1,5 A max.
Solid uninsulated Wire
2,5 A max.
5000 M
min.
600 Vrms / 2.0 mA max. leakage current
22,25 N max. / No contact axial displacement allowed
Gauge Fixture
Max.
Min.
Separation Force (N min.)
Inner diameter
min. / max.
0,559 (.0220) / 0,564 (.0222)
0,582 (.0229) / 0,587 (.0231)
0,137
Engagement Force (N max.)
1,667
Mating / Unmating Forces (per contact)
Mechanical Endurance
Contact Resistance
Mating : 2.2 N max.
Unmating : 0.14 N min. / 2.2 N max.
500 cycles mating/unmating
Low level current (10 mA / 20 mV DC) : 6.0 m
Rated current : 5.0 m max.
Nb of Contacts per Connector
2 to 4
5 to 14
15 and over
max.
AWG 26 Wire
2,0 A max.
1,8 A max.
1,4 A max.
AWG 28 Wire
1,4 A max.
1,2 A max.
0,9 A max.
Maximum Rated Current
Solid uninsulated Wire
2,0 A max.
1,8 A max.
1,4 A max.
Maximum Weight
Male Contact
Female contact
Plug Insulator
Receptacle Insulator
Guide Posts (pair)
Latching Plug part
Latching Receptacle part
Solid Uninsulated Wire
Insulated Cable AWG26 (ESCC 390101302B)
Insulated Cable AWG28 (ESCC 390101301B)
20000 Gamma max. (NM)
0.020 g
0.020 g
0.021 g / cavity
0.006 g / cavity
0.035 g
0.030 g
0.040 g
1.60 g / m
2.30 g / m
1.80 g / m
Residual Magnetism Level
Dimensions are shown in mm (inch)
Dimensions subject to change
138
Microminiature Connectors Type MTB1 Space
Contact Design
Welded tip
Sleeve
Wire
Crimp area
Wire crimp
The high-performance and reliable contact characteristics are obtained by the Micropin
TM
contact system.
The flexible "twist-pin" spring contact consists of 7 strands of 0,127 (.005) diameter beryllium copper wire helically wound around a core of 3 strands
0,09 (.0035) diameter soft copper wire.
This wire bundle is crimped into a sleeve at one end. The other end is terminated with a hemispherically shaped weld.
The wire bundle is compressed to create a bulge with a diameter slightly larger than the socket inside diameter.
The pin elongates and twists when it enters the socket. Electrical contact is maintained along 7 spiral lines.
The socket is a precision-made tube with a chamfered lead-in.
Normal mating conditions
Severe misalignment
Twist-pin contacts will mate even under severe misalignment.
The flexible twist-pin is recessed into the insulator and the rigid socket is exposed, reversing the traditional positions of pin and socket.
During mating, the socket is guided into the pin insulator by the lead-in chamfer.
The pin is kept from flexing beyond the socket capture radius by the walls of the cavity.
The hemispherical weld of controlled radius at the tip of the pin combines with the lead-in chamfers of the socket contact and the pin insulator to
cam the pin into alignment.
By controlling the welding process and the dimensions of the socket contact and the insulators, it is impossible for the recessed pin to escape the
socket capture radius.
Dimensions are shown in mm (inch)
Dimensions subject to change
139
Microminiature Connectors Type MTB1 Space
Terminations
Harness type insulated cables : AWG 26 to AWG 28, 7 strand, single-core cables.
I want to use PIC16F1783 to realize the self-transmission and self-reception of the serial port, and use a 16M crystal oscillator as the external crystal oscillator. The program is as follows: #includ...
(10ppm error means 0.8 seconds error per day) If the error is found to reach 1 second per day when using a single-chip microcomputer as an electronic clock, how can the software be used to reduce this...
EP9315 CPU, previously used K9F1208U0B, read and write normally, after changing to K9F1208U0C, read and write can also be read and written, but always need to go through ECC check to correct the read ...
After seeing the laser engraving machine on the forum before, I suddenly felt that this thing could be used for drawing, and it could remove a lot of structural support parts to achieve the effect of ...
1. Consider transmission attenuation: When the floor is very high and far from the monitoring center, the transmission attenuation problem should be carefully considered. When choosing cables, everyon...
With the rapid development of technology, automotive intelligence is increasing at an unprecedented rate. This not only enhances vehicle functionality and comfort, but also places higher deman...[Details]
"We have successfully launched the first version of our dedicated chip for EMB brake-by-wire. Second-generation samples have also been successfully completed, and we are actively planning a third-g...[Details]
My career has been closely tied to the semiconductor industry. From product management to content marketing, I've provided countless forecasts and predictions across a variety of roles. Whethe...[Details]
Inverter power supplies on the market can generally be divided into two categories: sine wave inverters and square wave inverters. Some engineers also like to categorize pure sine wave inverters as...[Details]
Puttshack's Trackaball uses the Nordic nRF54L15 system-on-chip (SoC) to monitor sensors and enable Bluetooth low energy connectivity, while the nPM2100 power management integrated circuit (PMIC) ...[Details]
From time to time, I see some audiophiles spending a lot of money or a lot of time to DIY speakers, but the results are not what they want. Below I list some of the small experiences I summarized b...[Details]
Facial recognition, a biometric technology that uses facial features to authenticate identity, has rapidly become a global market hotspot in recent years as the technology has entered practical use...[Details]
On August 20, it was reported that the specifications of Intel's upcoming Panther Lake mobile processor appeared on the Intel GFX CI website, which mainly focuses on Intel's open source Linux drive...[Details]
Keysight Technologies reported strong third-quarter results, with revenue and earnings per share exceeding expectations and steady order growth. The company, driven by strong growth across multiple...[Details]
The consumer electronics, appliance, industrial, and automotive markets are experiencing increasing demand for sophisticated motor control solutions. Depending on the application, a variety of moto...[Details]
The Importance of Intelligent Motion Control in Smart Manufacturing
Intelligent motion control is a core building block of smart manufacturing, enabling highly flexible and efficient manufactu...[Details]
Annual increases in global carbon emissions are leading to global warming and melting polar glaciers, necessitating urgent environmental solutions. Countries around the world are seeking better sol...[Details]
Shock absorbers, as the name implies, are responsible for cushioning and absorbing shocks in a car. So how much do you know about shock absorbers and how to replace them in electric cars?
...[Details]
A graphics processor (GPU), also known as a display core, visual processor, or display chip, is a microprocessor specialized for image processing on personal computers, workstations, game consoles,...[Details]
Samsung Display has recently signed a contract with Tesla (US) to supply OLED (organic light-emitting diode) panels for the facial display of Tesla's humanoid robot, Optimus Prime. According to Pho...[Details]
Microchip MCU
京公网安备 11010802033920号
EEWORLD
