M
www.vishay.com
Vishay Dale Thin Film
High Reliability Thick Film Resistor,
Surface-Mount Chip
FEATURES
• High purity alumina substrate for high power
dissipation (2 W max.)
Available
Actual
Size
0502
Utilizing proven expertise in thick and thin film resistors to
satisfy your manufacturing needs, Vishay provides a high rel
chip with the same reliability and stability found in military
grade resistors. These chips are available in the widest
range of sizes, values, and performance characteristics. And
manufactured on the MIL-PRF-55342 qualified controlled
production line. All product is 100 % electrical tested for
tolerance and after thermal shock testing and typically meet
the requirements of group A in MIL-PRF-55342
performance.
• Wraparound terminations featuring a thin film
adhesion layer covered with a leach resistant
nickel barrier layer for +150 °C operating
conditions
• High speed laser trimming for high volume
requirements
• Ruthenium based cermet
dependable performance
• Fired-on glass passivation
thick
film
for
Available
Available
Available
• Tape and reel packaging standard; static-free waffle pack
available
• Active trim and 0
chips
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
CONSTRUCTION
Resistor
Overglaze
Alumina
Substrate
Inner Electrode
Nickel Barrier
Plated
Solder
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
100
1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Ruthenium
1
to 25 M
± 100 ppm/°C to ± 300 ppm/°C
± 0.5 % to ± 10 %
R
± 0.15 %
-
-
30 V to 200 V
-65 °C to +155 °C
-65 °C to +155 °C
< -35 dB (typical)
-
CONDITIONS
-
-
-55 °C to +125 °C
-
-
-
-
-
-
-
-
-
Revision: 21-Apr-2021
Document Number: 60031
1
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
WORKING VOLTAGE
(V)
30
RESISTANCE RANGE
()
1 to 10
10 to 25M
10 to 10M
1 to 10
10 to 25M
10 to 10M
1 to 10
10 to 25M
10 to 10M
1 to 10
10 to 25M
10 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
1 to 6
6 to 25M
5.62 to 10M
TOLERANCE
(± %)
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
2, 5, 10
1, 2, 5, 10
0.5
TCR
(± ppm/°C)
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
200, 300
100, 200, 300
100, 200, 300
COMPONENT RATINGS
CASE SIZE
(1)
POWER RATING
(mW)
100
0402
0502
100
40
0504
125
40
0505
125
50
0603
150
50
0705
200
70
0805
200
70
1005
250
100
1010
500
100
1206
330
100
1505
350
125
2010
1000
200
2208
750
200
2512
2000
200
Notes
• Consult factory for nominals above 25 M
(1)
0705 and 0805 are the same (only use 0805 when ordering)
Revision: 21-Apr-2021
Document Number: 60031
2
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS
in inches
D
T
E
L
W
CASE SIZE
0402
0502
0504
0505
0603
0705, 0805
(1)
1005
1010
1206
1505
2010
2208
2512
L
0.042 ± 0.006
0.055 ± 0.005
0.055 ± 0.005
0.055 ± 0.006
0.064 ± 0.006
0.080 ± 0.006
0.105 ± 0.007
0.105 ± 0.007
0.126 ± 0.008
0.155 ± 0.007
0.197 ± 0.006
0.230 ± 0.007
0.250 ± 0.006
W
0.022 ± 0.005
0.025 ± 0.005
0.040 ± 0.005
0.050 ± 0.005
0.032 ± 0.005
0.050 ± 0.005
0.050 ± 0.005
0.100 ± 0.005
0.063 ± 0.005
0.050 ± 0.005
0.098 ± 0.005
0.075 ± 0.005
0.124 ± 0.005
T
0.010 to 0.033
0.020 max.
0.020 ± 0.005
0.012 to 0.033
0.010 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
D
0.010 ± 0.005
0.010 ± 0.005
0.010 ± 0.005
0.010 ± 0.005
0.012 ± 0.005
0.015 ± 0.005
0.020 ± 0.005
0.015 ± 0.005
0.020 + 0.005 / - 0.010
0.020 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 ± 0.005
E
0.010 ± 0.005
0.015 ± 0.005
0.010 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 ± 0.005
0.015 ± 0.005
0.020 + 0.005 / - 0.010
0.020 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 ± 0.005
Note
(1)
0705 and 0805 are the same (only use 0805 when ordering)
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST
Thermal Shock
Short Term Overload
Low Temperature Operation
Resistance to Solder Heat
Moisture Resistance
High Temperature Exposure
10
R
± (%)
0.02
0.02
0.03
0.06
0.10
0.02
100 k
R
± (%)
0.03
0.02
0.04
0.02
0.08
0.02
DERATING CURVE
Axis Title
100
10000
80
2nd line
Rated Power (%)
1000
1st line
2nd line
100
20
10
0
70
125
155
Ambient Temperature (°C)
60
40
0
Revision: 21-Apr-2021
Document Number: 60031
3
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M-1206K5001GBT1
M
GLOBAL
MODEL
-
1
CASE
SIZE
0402
0502
0504
0505
0603
0805
1005
1010
1206
1505
2010
2208
2512
2
0
6
K
5
0
0
1
G
B
T
1
TCR
CHARACTERISTIC
K
= 100 ppm/°C
L
= 200 ppm/°C
M
= 300 ppm/°C
X
= 0
jumper
RESISTANCE
First 3 digits are
significant figures
and the last digit
specifies
the
number of zeros
to follow. “R”
designates
the
decimal point.
Example:
10R0 = 10
1002 = 10 k
TOLERANCE
D
= ± 0.5 %
F
=±1%
G
=±2%
J
=±5%
K
= ± 10 %
N
= not
trimmed
TERMINATION
B
= wraparound
nickel barrier
with plated
tin / lead solder
S
= wraparound
nickel barrier
with plated
matte tin
lead (Pb)-free
solder
G
= epoxy
bondable
P
= wraparound
palladium silver
PACKAGING
BS
= BULK
100 min., 1 mult.
WS
= WAFFLE
100 min., 1 mult.
TAPE AND REEL
T0
= 100 min., 100 mult.
T1
= 1000 min., 1000 mult.
(1)
T3
= 300 min., 300 mult.
T5
= 500 min., 500 mult.
TF
= full reel
TP
= 100 min., 1 mult.
(package unit single lot
date code)
TS
= 100 min., 1 mult.
TI
= 100 min., 1 mult.
(sales order item single lot
date code)
M-
= high rel
cermet
thick film
wraparound
Historical Part Number Example: M0505K1003JBT (for reference purposes only)
M
STYLE
0505
CASE SIZE
K
TCR
CHARACTERISTIC
1003
OHMIC VALUE
J
TOLERANCE
B
TERMINATION
T
PACKAGING
Note
(1)
Preferred packaging code
Revision: 21-Apr-2021
Document Number: 60031
4
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
