If I want TIM1 to be the master timer to send one pulse, use TIM2 as the slave timer to count the number of pulses sent by TIM1, and at the same time let TIM2 send another pulse, and let TIM1 be the s...
KEY1 to KEY8 are connected to 8 pins of FPGA, and the LED lights are lit by the high and low levels of these 8 pins; S1 is pressed, KEY1 is low level, S1 is disconnected, KEY1 is high level. [color=#f...
Light-emitting diode (LED) is an electroluminescent photoelectric device. As early as 1907, people discovered that diodes made of certain semiconductor materials have the physical phenomenon of emitti...
[i=s]This post was last edited by Aguilera on 2019-1-6 09:52[/i] [size=4] [/size][color=rgb(34, 34, 34)][font=Verdana]The non-inverting input of IC1A and the inverting input of IC1B are connected to t...
1. Basic format of PIC microcontroller program First introduce two pseudo instructions: EQU - label assignment pseudo instruction ORG - address definition pseudo instruction After RESET, the in...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
In recent years, lighting has become an important area that countries around the world are targeting to promote energy conservation and environmental protection. According to statistics, about 20% ...[Details]
With the rapid development of urban economy, elevators are increasingly used as a vertical transportation tool. However, elevator fault detection and maintenance, especially the role of elevator remot...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
LED is the abbreviation of light emitting diode, which is an electric light source made of semiconductor technology. The core part of LED is a chip composed of P-type semiconductor and N-type semi...[Details]
With the rapid development of intelligent control technology, computers and information technology, the trend of information appliances IA (Information Application), computers and communications integ...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
In today's body control module (BCM) designs, savvy engineers are moving away from electromechanical relays whenever possible. Their next step is to eliminate fuses. But is eliminating fuses a nece...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
It is well known to automotive suppliers that automakers are demanding more from their supply base. For connector suppliers, this means stricter requirements for product performance, stability and ...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
