All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
NOTE: KYOCERA AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
42
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
041520
–
high reliability tantalum capacitors
–
TBJ SERIES
CWR11 - MIL-PRF-55365/8 Established Reliability,
COTS-Plus & Space Level
RATING & PART NUMBER REFERENCE
CWR11 P/N
CWR11K^156*@+
CWR11M^104*@+
CWR11M^154*@+
CWR11M^224*@+
CWR11M^334*@+
CWR11M^474*@+
CWR11M^684*@+
CWR11M^105*@+
CWR11M^155*@+
CWR11M^225*@+
CWR11M^335*@+
CWR11M^475*@+
CWR11M^685*@+
CWR11N^104*@+
CWR11N^154*@+
CWR11N^224*@+
CWR11N^334*@+
CWR11N^474*@+
CWR11N^684*@+
CWR11N^105*@+
CWR11N^155*@+
CWR11N^225*@+
CWR11N^335*@+
CWR11N^475*@+
COTS-Plus P/N
TBJ D 156 * 025 C
# @ 0 ^ ++
TBJ A 104 * 035 C
# @ 0 ^ ++
TBJ A 154 * 035 C
# @ 0 ^ ++
TBJ A 224 * 035 C
# @ 0 ^ ++
TBJ A 334 * 035 C
# @ 0 ^ ++
TBJ B 474 * 035 C
# @ 0 ^ ++
TBJ B 684 * 035 C
# @ 0 ^ ++
TBJ B 105 * 035 C
# @ 0 ^ ++
TBJ C 155 * 035 C
# @ 0 ^ ++
TBJ C 225 * 035 C
# @ 0 ^ ++
TBJ C 335 * 035 C
# @ 0 ^ ++
TBJ D 475 * 035 C
# @ 0 ^ ++
TBJ D 685 * 035 C
# @ 0 ^ ++
TBJ A 104 * 050 C
# @ 0 ^ ++
TBJ B 154 * 050 C
# @ 0 ^ ++
TBJ B 224 * 050 C
# @ 0 ^ ++
TBJ B 334 * 050 C
# @ 0 ^ ++
TBJ C 474 * 050 C
# @ 0 ^ ++
TBJ C 684 * 050 C
# @ 0 ^ ++
TBJ C 105 * 050 C
# @ 0 ^ ++
TBJ D 155 * 050 C
# @ 0 ^ ++
TBJ D 225 * 050 C
# @ 0 ^ ++
TBJ D 335 * 050 C
# @ 0 ^ ++
TBJ D 475 * 050 C
# @ 0 ^ ++
Parametric Specifications by Rating per MIL-PRF-55365/8
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
NOTE: KYOCERA AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
The circuit is shown in the figure above. The transistor is 9012, the microcontroller is powered by 3.3V, the rated voltage of the relay is 5V, the rated current is 21.1mA, and the coil resistance is ...
Contact all those who are interested in BIOS and boot area technology, focus on the combination of theory and practice, exchange technical information and practical experience, and give cash and other...
To make an open CNC milling machine system, the PC host microcontroller is the lower computer, and the basic interpolation function of the CNC system must be realized... Now the idea is to build a hum...
I am so depressed. I have been working on DS18B20 for a whole day. First, the initialization of 18B20 failed. After sending a low level, it was released. I couldn't detect the low level response of DS...
[i=s]This post was last edited by qwqwqw2088 on 2014-5-21 08:47[/i] [align=left][font=Arial, 宋体, Verdana, sans-serif][size=3][color=#a0522d] With the development of ARM microprocessor technology and f...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
As a wireless broadband metropolitan area network standard, WiMAX technology has greater advantages than previous 3.5GHz MMDS products in terms of non-line-of-sight transmission and spectrum utiliz...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Do you often have to add brake fluid to your car's brakes? The fact that you need to pump out the brake fluid to make sure there is no gas in the brake fluid line may not be done by the car owner h...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
For a long time, due to the limitation of hardware conditions, the display devices of traditional small handheld devices such as PDA are usually monochrome LCD, and the user interface is very simpl...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
1 Introduction
PROFIBUS is an international, open, and manufacturer-independent fieldbus standard. It is widely used in manufacturing automation, process industry automation, and automatio...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
0 Introduction
Under normal circumstances, the three-phase power in the power system is symmetrical, and they meet certain amplitude and phase conditions; but when the load changes, the syst...[Details]
Abstract: In order to realize wireless automatic alarm and monitoring of major safety places, based on the basic principle of pyroelectric infrared sensing, a detector for receiving infrared radia...[Details]