All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
NOTE: KYOCERA AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
42
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
041520
–
high reliability tantalum capacitors
–
TBJ SERIES
CWR11 - MIL-PRF-55365/8 Established Reliability,
COTS-Plus & Space Level
RATING & PART NUMBER REFERENCE
CWR11 P/N
CWR11K^156*@+
CWR11M^104*@+
CWR11M^154*@+
CWR11M^224*@+
CWR11M^334*@+
CWR11M^474*@+
CWR11M^684*@+
CWR11M^105*@+
CWR11M^155*@+
CWR11M^225*@+
CWR11M^335*@+
CWR11M^475*@+
CWR11M^685*@+
CWR11N^104*@+
CWR11N^154*@+
CWR11N^224*@+
CWR11N^334*@+
CWR11N^474*@+
CWR11N^684*@+
CWR11N^105*@+
CWR11N^155*@+
CWR11N^225*@+
CWR11N^335*@+
CWR11N^475*@+
COTS-Plus P/N
TBJ D 156 * 025 C
# @ 0 ^ ++
TBJ A 104 * 035 C
# @ 0 ^ ++
TBJ A 154 * 035 C
# @ 0 ^ ++
TBJ A 224 * 035 C
# @ 0 ^ ++
TBJ A 334 * 035 C
# @ 0 ^ ++
TBJ B 474 * 035 C
# @ 0 ^ ++
TBJ B 684 * 035 C
# @ 0 ^ ++
TBJ B 105 * 035 C
# @ 0 ^ ++
TBJ C 155 * 035 C
# @ 0 ^ ++
TBJ C 225 * 035 C
# @ 0 ^ ++
TBJ C 335 * 035 C
# @ 0 ^ ++
TBJ D 475 * 035 C
# @ 0 ^ ++
TBJ D 685 * 035 C
# @ 0 ^ ++
TBJ A 104 * 050 C
# @ 0 ^ ++
TBJ B 154 * 050 C
# @ 0 ^ ++
TBJ B 224 * 050 C
# @ 0 ^ ++
TBJ B 334 * 050 C
# @ 0 ^ ++
TBJ C 474 * 050 C
# @ 0 ^ ++
TBJ C 684 * 050 C
# @ 0 ^ ++
TBJ C 105 * 050 C
# @ 0 ^ ++
TBJ D 155 * 050 C
# @ 0 ^ ++
TBJ D 225 * 050 C
# @ 0 ^ ++
TBJ D 335 * 050 C
# @ 0 ^ ++
TBJ D 475 * 050 C
# @ 0 ^ ++
Parametric Specifications by Rating per MIL-PRF-55365/8
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
NOTE: KYOCERA AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Does STM32F103VET6 have DAC function? If yes, why is there no DAC output?I have been working on this for two days, and I really can't find out what is wrong below. Why is there no DA output?The DAC ou...
I did a whole day of experiments yesterday and burned 2 IGBT tubes. In the afternoon, the circuit finally worked! Hahaha, although it was hard work, I was very happy to see the equipment working....
I want to use a single-chip computer to determine whether several 220V AC motors are actually running or shut down. How should this circuit be implemented? Please share your opinions....
The PL side writes data to DDR via AXI-FULL. The PS side cannot see the data changes using the memory monitoring window. However, when the scroll bar is scrolled down, the data updated by the PL side ...
introduction
Since the beginning of the 21st century, the world of information has changed rapidly. Maybe a high-tech product will be released today and a better similar product will be releas...[Details]
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
At present, the traffic congestion in cities is quite serious. According to relevant news reports: In China, the traffic congestion has expanded from megacities such as Beijing, Shanghai, and Guang...[Details]
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
Many battery-powered systems require a visual indicator to show when the battery needs to be replaced. LEDs are commonly used for this purpose, but they consume at least 10mA of current. This con...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
12v Lead Acid batteries used in trucks, cars, RVs and uninterruptible power supplies are usually rated at 12V. This circuit monitors the battery, the charge and discharge curves, gives the cu...[Details]
FPGAs are used in 81% of electronic systems, including many commercial and defense products, and most FPGAs use BGA packaging. The BGA packaging is characterized by small solder balls and small sol...[Details]
introduction
Steam turbines are driven by high-temperature and high-pressure steam generated by boilers to run at high speed. They are key power equipment in thermal power plants. The emergenc...[Details]
introduction
LEDs continue to gain popularity in automotive applications, thanks to their long lifespan and the flexibility they offer for body styling and interior design. Some may be surpris...[Details]
As the global LED market demand continues to increase, my country's LED industry will face huge opportunities in the future. However, the core LED technology and patents are basically monopolized b...[Details]