APD-080M025-1
Vishay Dale
Plasma Panel Display Modules
80 Character Display with Drive Electronics
Controller and Serial Interface
FEATURES
•
•
•
•
•
•
•
•
The APD-080M025-1 plasma display module consists of a
multiplexed DC plasma display, drive circuitry and switching
voltage converter mated with an intelligent, microprocessor-
based controller board. The resulting assembly interfaces
easily to microprocessor based systems and only requires
readily available low voltages for power. Vishay Dale's
patented open construction display technology assures a
stable flicker free screen even at highest communication
rates.
Interfacing is very simple (and requires no handshaking as a
20 byte FIFO buffer captures data when the display is busy)
through a single 3 pin connector that has + 5 VDC, SERIAL
(RS-232) DATA and GROUND connections.
An EPROM based character generator is factory pro-
grammed with 96 ASCII characters. Alternate character sets
can be user or factory programmed.
Serial data protocol is 1 start bit, 8 data bits and no stop bit.
Baud rate (300, 1200 or 9600) is selected with a control
board jumper. A simplified command set allows quick and
efficient code generation.
0
1
2
3
4
5
6
7
8
9
10
Panel Supply Voltage
Panel Supply Current
80 (4 x 20) alphanumeric characters (5 x 7 dot matrix)
plus underbar
Only + 5 VDC required
ASCII character set (optional character sets available)
Efficient serial interface (RS-232)
Wide viewing angle (150°)
High brightness
Rugged design/slim profile
Flicker free refresh, high speed data input
STANDARD ELECTRICAL SPECIFICATIONS
MIN.
+ 4.75
—
TYP.
+ 5.0
0.3
MAX.
+ 5.25
1.0
UNITS
V
A
ASCII CHARACTER SET
32
SP
!
"
#
$
%
&
‘
(
)
*
+
,
-
.
/
48
0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
64
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
80
P
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
^
_
96
‘
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
112
p
q
r
s
t
u
v
w
x
y
z
{
|
}
~
OPTICAL SPECIFICATIONS
Viewing Area:
4.03" [102.36mm] W x 1.46" [37.08mm] H.
Number of Characters:
80.
Character Size:
0.150" [3.81mm] W x 0.250" [6.35mm] H.
Luminance:
80 foot lamberts.
Viewing Angle:
150° cone.
11
12
13
14
15
www.vishay.com
2
Document Number: 37005
Revision 05-Dec-00
APD-080M025-1
Vishay Dale
DIMENSIONS
in inches [millimeters]
6.25
[158.75]
5.75
[146.05]
0.250
[6.35]
1.46
[37.08]
0.510
[12.95]
4.03
[102.36]
2.50
[63.50]
3.0
[76.20]
6-32
Threaded Standoffs
4 Places
0.860
[21.84]
0.250
[6.35]
1.75
[44.45]
ORDERING INFORMATION
DESCRIPTION
PART NUMBER
Display, Drive Electronics and Controller ................................................................................................................................. APD-080M025-1
Mating Connector Kit ......................................................................................................................................................................... 280108-01
Non-Glare Filter (amber circular polarized) - other filters available - contact factory ......................................................................... 280109-10
Document Number: 37005
Revision 05-Dec-00
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Embedded System
京公网安备 11010802033920号
EEWORLD
