provides tough, semirigid, very-thin-wall insulation and strain relief of multipin
connectors, solder joints and other delicate electrical connections and
terminations. It is well-suited for applications that require dense packing
of components or visual inspection of covered components. It is especially
suitable for applications requiring outstanding abrasion and cut-through
resistance and superior chemical and solvent resistance. Its high temperature
performance meets or exceeds military and industrial standards. RW-175 meets
NASA outgassing requirements making it suitable for use in space applications
such as satellites.
KEY FEATURES
•
2:1 shrink ratio for all standard sizes
•
Tough, semirigid, very-thin-wall insulation
•
High flame-resistance, meeting the require-
ELECTRICAL
•
Provides excellent electrical insulation
•
Not recommended for use as a primary insulator at temperatures exceeding 135°C
[275°F]
ments of AMS-DTL-23053, Test C, with UL
and CSA VW-1 flammability rating
•
High temperature performance that meets
MECHANICAL
•
Tough modified polyvinylidene fluoride material provides outstanding abrasion and
or exceeds military and industrial standards
•
Protection from most industrial solvents,
cut-through resistance
•
Excellent for strain relief when installed on delicate electrical connections and termi-
fuels, and chemicals
•
Available in several “microtubing” sizes for
nations
applications requiring recovered I.D.’s as
small as .007” (0.178mm)
•
Meets NASA outgassing requirements
•
Offers improved clarity (clear version) and
TEMPERATURE RATING
•
Full recovery temperature: 175°C [347°F]
•
Operating Temperature range: -55°C to 175°C [-67°F to 347°F]
increased resistance to crazing when com-
pared to previously offered solutions
STANDARDS AND SPECIFICATIONS
•
RW-3029/2
•
RW-175 Microtubing SCD
APPLICATIONS
•
Appliances
•
Military and commercial aircraft
•
Satellites
•
Commercial electronics and communication
•
Industrial equipment
•
SAE-AMS-DTL-23053/8
•
UL 224 VW-1
•
CSA C22.2 No. 198.1-98 VW-1
ORDERING INFORMATION
•
Color: Clear (-X) (standard); Black (-0) (nonstandard)
•
Standard packaging (-STK): 1.2m [4 ft.] lengths
Optional packaging (-SP): Spool, varying lengths (consult TE for details)
•
Ordering description: Specify product name, size, and color; for example, RW-
175-3/16-X.
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
RW-175 DIMENSIONS
RW-175
Expanded as supplied
W
Fully recovered after heating
D
d
Size
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
1-1/2
2
Minimum
Expanded I.D. (D)
in.
.046
.063
.093
.125
.187
.250
.375
.500
.750
1.000
1.500
2.000
mm.
1.17
1.60
2.36
3.18
4.75
6.35
9.53
12.70
19.05
25.40
38.10
50.80
Maximum
Recovered I.D. (d)
in.
.023
.031
.046
.062
.093
.125
.187
.250
.375
.500
.750
1.000
mm.
.58
.79
1.17
1.58
2.36
3.18
4.75
6.35
9.53
12.70
19.05
25.40
Nominal Recovered
Jacket Wall (W)
in.
.010 ± .002
.010 ± .002
.010 ± .002
.010 ± .002
.010 ± .002
.013 ± .002
.013 ± .002
.013 ± .002
.017 ± .003
.019 ± .003
.020 ± .003
.020 ± .003
mm.
.25 ± .051
.25 ± .051
.25 ± .051
.25 ± .051
.25 ± .051
.33 ± .051
.33 ± .051
.33 ± .051
.43 ± .076
.48 ± .076
.51 ± .076
.51 ± .076
RW-175 ORDERING DESCRIPTION
Example 1:
RW-175-3/8-X-STK
1.2m [4 ft.] Length
Color is Clear
Size
Semirigid, Very Thin Wall Product
Example 2:
RW-175-3/4-0-SP
Spool Packaging
Color is Black
Size
Semirigid, Very Thin Wall Product
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
PRODUCT OFFERING
RW-175
Material Description
RW-175-3/64-X-STK
RW-175-3/64-X-SP
RW-175-3/64-0-STK
RW-175-3/64-0-SP
RW-175-1/16-X-STK
RW-175-1/16-X-SP
RW-175-1/16-0-STK
RW-175-1/16-0-SP
RW-175-3/32-X-STK
RW-175-3/32-X-SP
RW-175-3/32-0-STK
RW-175-3/32-0-SP
RW-175-1/8-X-STK
RW-175-1/8-X-SP
RW-175-1/8-0-STK
RW-175-1/8-0-SP
RW-175-3/16-X-STK
RW-175-3/16-X-SP
RW-175-3/16-0-STK
RW-175-3/16-0-SP
RW-175-1/4-X-STK
RW-175-1/4-X-SP
RW-175-1/4-0-STK
RW-175-1/4-0-SP
RW-175-3/8-X-STK
Material Number
CV3299-000
CV3270-000
CV3331-000
CV3269-000
CV3300-000
CV3257-000
CV3322-000
CV3256-000
CV3301-000
CV3267-000
CV3329-000
CV3266-000
CV3302-000
CV3262-000
CV3325-000
CV3261-000
CV3303-000
CV3265-000
CV3328-000
CV3264-000
CV3304-000
CV3260-000
CV3324-000
CV3259-000
CV3305-000
Material Description
RW-175-3/8-X-SP
RW-175-3/8-0-STK
RW-175-3/8-0-SP
RW-175-1/2-X-STK
RW-175-1/2-X-SP
RW-175-1/2-0-STK
RW-175-3/4-X-STK
RW-175-3/4-X-SP
RW-175-3/4-0-STK
RW-175-1-X-STK
RW-175-1-X-SP
RW-175-1-0-STK
RW-175-1-1/2-X-STK
RW-175-1-1/2-0-STK
RW-175-2-X-STK
RW-175-030-X-SP†
RW-175-NO.1-X-SP†
RW-175-NO.2-X-SP†
RW-175-NO.13-X-SP†
RW-175-NO.14-X-SP†
RW-175-NO.33-X-SP†
RW-175-NO.33-0-SP†
RW-175-NO.65-X-SP†
RW-175-NO.65-0-SP†
Material Number
CV3272-000
CV3332-000
CV3271-000
CV3306-000
CV3258-000
CV3323-000
CV3307-000
CV3268-000
CV3330-000
CV3308-000
CV3263-000
CV3326-000
CV3309-000
CV3327-000
CV3310-000
CV3281-000
CV3293-000
CV3294-000
CV3291-000
CV3292-000
CV3296-000
CV3295-000
CV3298-000
CV3297-000
† RW-175 microtubing is available in 0.014-0.045 in. (.356-1.143 mm) dia.
Consult TE for complete details.
SAMPLE INVENTORY
RW-175-3/64-X-STK
RW-175-1/16-X-STK
RW-175-3/32-X-STK
RW-175-1/8-X-STK
RW-175-3/16-X-STK
RW-175-1/4-X-STK
RW-175-3/8-X-STK
RW-175-1/2-X-STK
RW-175-3/4-X-STK
RW-175-1-X-STK
RW-175-1-1/2-X-STK
RW-175-NO.1-X-SP
RW-175-NO.33-X-SP
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
PROPERTY REQUIREMENTS
RW-175
Property
PHYSICAL
Dimensions
Longitudinal Change
Tensile Strength
Ultimate Elongation
Secant Modulus (expanded)
Specific Gravity
Low Temperature Flexibility
4 hours at -55°C ± 2°C (-67 ±4°F)
Heat Shock
4 hours at 300 ± 5°C (572 ± 9°F)
Heat Resistance
168 hours at 250 ± 5°C (482 ± 9°F)
Followed by test for:
Ultimate elongation
Vacuum Outgasing
TML (Total Mass Loss)
VCM (Volatile Condensible Material)
ELECTRICAL
Dielectric Strength
Sizes 3/64 through 12
Sizes 3/4 through 2
Volume Resistivity
CHEMICAL
Corrosive Effect Copper Mirror
16 hours at 150°C
Copper Contact
168 hours at 175 ± 3°C (347 ± 5°F)
Followed by test for:
Ultimate Elongation
Flammability
Average Time of Burning
Fungus Resistance
Followed by tests for:
Tensile Strength
Ultimate Elongation
Dielectric Strength
Sizes 3/64 through 1/2
Sizes 3/4 through 2
Water Absorption
24 hours at 23 ± 3°C (73 ± 5°F)
Fluid Resistance
24 hours at 23 ± 3°C (73 ± 5°F)
JP-4 Fuel (MIL-T-5624)
SKYDROL 500 Hydraulic Fluid (MIL-H-5606)
Aviation Gasoline 100/130 (MIL-G-5572)
Salt Water (5% salt)
Anti-icing Fluid (MIL-A-8243)
Lubricating Oil (MIL-L-7808)
Followed by tests for:
Dielectric Strength
Sizes 3/64 through 1/2
Sizes 3/4 through 2
Tensile Strength
Unit
Inch (mm)
Percent
psi (MPa)
Percent
psi (MPa)
Requirement
Table 1
+0, -10 maximum
5000 minimum (34.5)
150 minimum
1 x 10
5
minimum (690)
1.8 maximum
No cracking
No dripping, flowing or
cracking
Test Method
RW-3029/2, Section 4.3.1
ASTM D 2671
RW-3029/2, Section 4.3.2
ASTM D 2671
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.3
RW-3029/2, Section 4.3.4
RW-3029/2, Section 4.3.5
Percent
Percent
Percent
V/mil (kV/mm)
Ohm-cm
50 minimum
1.0 maximum
0.1 maximum
ASTM D 2671
ASTM E 595
800 minimum (31,500)
600 minimum (2,600)
1 X 10
13
minimum
Noncorrosive
No pitting or blackening of
copper
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.6.1
ASTM D 2671, Proc. A
RW-3029/2, Section 4.3.6.2
ASTM D 2671, Proc. B
RW-3029/2, Section 4.3.2
ASTM D 2671, Proc. A
ISO 846, Method B
Percent
Seconds
psi (Mpa)
Percent
Volts/mil (volts/mm)
Percent
100 minimum
15 maximum
5000 minimum (34.5)
150 minimum
800 minimum (31,500)
600 minimum (23,600)
0.5 maximum
RW-3029/2, Section 4.3.2
ASTM D 2671
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.7
Volts/mil (Volts/mm)
psi (MPa)
700 minimum (27,600)
500 minimum (19,700)
5000 minimum (34.5)
ASTM D 2671
RW-3029/2, Section 4.3.2
ASTM D 2671
While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty
or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly
disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions
in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
I would like to ask forthe reasons and solutions forError[Pa045]: function "__STREXW" has no prototypeandWarning[Pe223]: function "assert_param" declared implicitly .1> Error[Pa045]: function "__STREX...
DMA Control Method in ADI Routine
For the use of DMA , ADI first usedDMAINIT() function is used in program operation.DmaClr() , DmaCycleCntCtrl() , etc., they are all in DmaLib.c .
Next, let ’s talk a...
The select() mechanism provides a data structure of fd_set, which is actually an array of long type. Each array element can establish a connection with an open file handle (whether it is a socket hand...
In recent years, cordless vacuum cleaners and sweeping robots have become more and more popular, bringing great convenience to people's lives. As the core components of vacuum cleaners and sweeping ro...
I have encountered a serious problem with my graduation project. It is almost finished. I am looking for a smart car for my graduation project. It has the function of patrolling and blocking lines. It...
The hardware connection of this experiment is the same as the previous one, and the program is not very complicated and easy to understand. What we mainly learn and refer to is the calling of his prog...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems ...[Details]
introduction
Throughout the history of automotive lighting, power has always played an important role. Initially, cars only needed headlights to see the road in the dark. Later, other light so...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
1. What is temperature?
Heat is a type of molecular motion. The hotter an object is, the faster its molecules move. Absolute zero is defined as the temperature at which all molecular motion ...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
I've been studying dot matrix recently. It looks simple, but it takes a while to master it completely! The 8*8 dot matrix hardware circuit I'm making now is like this. The row is driven by 74HC138 + t...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
