provides tough, semirigid, very-thin-wall insulation and strain relief of multipin
connectors, solder joints and other delicate electrical connections and
terminations. It is well-suited for applications that require dense packing
of components or visual inspection of covered components. It is especially
suitable for applications requiring outstanding abrasion and cut-through
resistance and superior chemical and solvent resistance. Its high temperature
performance meets or exceeds military and industrial standards. RW-175 meets
NASA outgassing requirements making it suitable for use in space applications
such as satellites.
KEY FEATURES
•
2:1 shrink ratio for all standard sizes
•
Tough, semirigid, very-thin-wall insulation
•
High flame-resistance, meeting the require-
ELECTRICAL
•
Provides excellent electrical insulation
•
Not recommended for use as a primary insulator at temperatures exceeding 135°C
[275°F]
ments of AMS-DTL-23053, Test C, with UL
and CSA VW-1 flammability rating
•
High temperature performance that meets
MECHANICAL
•
Tough modified polyvinylidene fluoride material provides outstanding abrasion and
or exceeds military and industrial standards
•
Protection from most industrial solvents,
cut-through resistance
•
Excellent for strain relief when installed on delicate electrical connections and termi-
fuels, and chemicals
•
Available in several “microtubing” sizes for
nations
applications requiring recovered I.D.’s as
small as .007” (0.178mm)
•
Meets NASA outgassing requirements
•
Offers improved clarity (clear version) and
TEMPERATURE RATING
•
Full recovery temperature: 175°C [347°F]
•
Operating Temperature range: -55°C to 175°C [-67°F to 347°F]
increased resistance to crazing when com-
pared to previously offered solutions
STANDARDS AND SPECIFICATIONS
•
RW-3029/2
•
RW-175 Microtubing SCD
APPLICATIONS
•
Appliances
•
Military and commercial aircraft
•
Satellites
•
Commercial electronics and communication
•
Industrial equipment
•
SAE-AMS-DTL-23053/8
•
UL 224 VW-1
•
CSA C22.2 No. 198.1-98 VW-1
ORDERING INFORMATION
•
Color: Clear (-X) (standard); Black (-0) (nonstandard)
•
Standard packaging (-STK): 1.2m [4 ft.] lengths
Optional packaging (-SP): Spool, varying lengths (consult TE for details)
•
Ordering description: Specify product name, size, and color; for example, RW-
175-3/16-X.
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
RW-175 DIMENSIONS
RW-175
Expanded as supplied
W
Fully recovered after heating
D
d
Size
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
1-1/2
2
Minimum
Expanded I.D. (D)
in.
.046
.063
.093
.125
.187
.250
.375
.500
.750
1.000
1.500
2.000
mm.
1.17
1.60
2.36
3.18
4.75
6.35
9.53
12.70
19.05
25.40
38.10
50.80
Maximum
Recovered I.D. (d)
in.
.023
.031
.046
.062
.093
.125
.187
.250
.375
.500
.750
1.000
mm.
.58
.79
1.17
1.58
2.36
3.18
4.75
6.35
9.53
12.70
19.05
25.40
Nominal Recovered
Jacket Wall (W)
in.
.010 ± .002
.010 ± .002
.010 ± .002
.010 ± .002
.010 ± .002
.013 ± .002
.013 ± .002
.013 ± .002
.017 ± .003
.019 ± .003
.020 ± .003
.020 ± .003
mm.
.25 ± .051
.25 ± .051
.25 ± .051
.25 ± .051
.25 ± .051
.33 ± .051
.33 ± .051
.33 ± .051
.43 ± .076
.48 ± .076
.51 ± .076
.51 ± .076
RW-175 ORDERING DESCRIPTION
Example 1:
RW-175-3/8-X-STK
1.2m [4 ft.] Length
Color is Clear
Size
Semirigid, Very Thin Wall Product
Example 2:
RW-175-3/4-0-SP
Spool Packaging
Color is Black
Size
Semirigid, Very Thin Wall Product
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
PRODUCT OFFERING
RW-175
Material Description
RW-175-3/64-X-STK
RW-175-3/64-X-SP
RW-175-3/64-0-STK
RW-175-3/64-0-SP
RW-175-1/16-X-STK
RW-175-1/16-X-SP
RW-175-1/16-0-STK
RW-175-1/16-0-SP
RW-175-3/32-X-STK
RW-175-3/32-X-SP
RW-175-3/32-0-STK
RW-175-3/32-0-SP
RW-175-1/8-X-STK
RW-175-1/8-X-SP
RW-175-1/8-0-STK
RW-175-1/8-0-SP
RW-175-3/16-X-STK
RW-175-3/16-X-SP
RW-175-3/16-0-STK
RW-175-3/16-0-SP
RW-175-1/4-X-STK
RW-175-1/4-X-SP
RW-175-1/4-0-STK
RW-175-1/4-0-SP
RW-175-3/8-X-STK
Material Number
CV3299-000
CV3270-000
CV3331-000
CV3269-000
CV3300-000
CV3257-000
CV3322-000
CV3256-000
CV3301-000
CV3267-000
CV3329-000
CV3266-000
CV3302-000
CV3262-000
CV3325-000
CV3261-000
CV3303-000
CV3265-000
CV3328-000
CV3264-000
CV3304-000
CV3260-000
CV3324-000
CV3259-000
CV3305-000
Material Description
RW-175-3/8-X-SP
RW-175-3/8-0-STK
RW-175-3/8-0-SP
RW-175-1/2-X-STK
RW-175-1/2-X-SP
RW-175-1/2-0-STK
RW-175-3/4-X-STK
RW-175-3/4-X-SP
RW-175-3/4-0-STK
RW-175-1-X-STK
RW-175-1-X-SP
RW-175-1-0-STK
RW-175-1-1/2-X-STK
RW-175-1-1/2-0-STK
RW-175-2-X-STK
RW-175-030-X-SP†
RW-175-NO.1-X-SP†
RW-175-NO.2-X-SP†
RW-175-NO.13-X-SP†
RW-175-NO.14-X-SP†
RW-175-NO.33-X-SP†
RW-175-NO.33-0-SP†
RW-175-NO.65-X-SP†
RW-175-NO.65-0-SP†
Material Number
CV3272-000
CV3332-000
CV3271-000
CV3306-000
CV3258-000
CV3323-000
CV3307-000
CV3268-000
CV3330-000
CV3308-000
CV3263-000
CV3326-000
CV3309-000
CV3327-000
CV3310-000
CV3281-000
CV3293-000
CV3294-000
CV3291-000
CV3292-000
CV3296-000
CV3295-000
CV3298-000
CV3297-000
† RW-175 microtubing is available in 0.014-0.045 in. (.356-1.143 mm) dia.
Consult TE for complete details.
SAMPLE INVENTORY
RW-175-3/64-X-STK
RW-175-1/16-X-STK
RW-175-3/32-X-STK
RW-175-1/8-X-STK
RW-175-3/16-X-STK
RW-175-1/4-X-STK
RW-175-3/8-X-STK
RW-175-1/2-X-STK
RW-175-3/4-X-STK
RW-175-1-X-STK
RW-175-1-1/2-X-STK
RW-175-NO.1-X-SP
RW-175-NO.33-X-SP
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
PROPERTY REQUIREMENTS
RW-175
Property
PHYSICAL
Dimensions
Longitudinal Change
Tensile Strength
Ultimate Elongation
Secant Modulus (expanded)
Specific Gravity
Low Temperature Flexibility
4 hours at -55°C ± 2°C (-67 ±4°F)
Heat Shock
4 hours at 300 ± 5°C (572 ± 9°F)
Heat Resistance
168 hours at 250 ± 5°C (482 ± 9°F)
Followed by test for:
Ultimate elongation
Vacuum Outgasing
TML (Total Mass Loss)
VCM (Volatile Condensible Material)
ELECTRICAL
Dielectric Strength
Sizes 3/64 through 12
Sizes 3/4 through 2
Volume Resistivity
CHEMICAL
Corrosive Effect Copper Mirror
16 hours at 150°C
Copper Contact
168 hours at 175 ± 3°C (347 ± 5°F)
Followed by test for:
Ultimate Elongation
Flammability
Average Time of Burning
Fungus Resistance
Followed by tests for:
Tensile Strength
Ultimate Elongation
Dielectric Strength
Sizes 3/64 through 1/2
Sizes 3/4 through 2
Water Absorption
24 hours at 23 ± 3°C (73 ± 5°F)
Fluid Resistance
24 hours at 23 ± 3°C (73 ± 5°F)
JP-4 Fuel (MIL-T-5624)
SKYDROL 500 Hydraulic Fluid (MIL-H-5606)
Aviation Gasoline 100/130 (MIL-G-5572)
Salt Water (5% salt)
Anti-icing Fluid (MIL-A-8243)
Lubricating Oil (MIL-L-7808)
Followed by tests for:
Dielectric Strength
Sizes 3/64 through 1/2
Sizes 3/4 through 2
Tensile Strength
Unit
Inch (mm)
Percent
psi (MPa)
Percent
psi (MPa)
Requirement
Table 1
+0, -10 maximum
5000 minimum (34.5)
150 minimum
1 x 10
5
minimum (690)
1.8 maximum
No cracking
No dripping, flowing or
cracking
Test Method
RW-3029/2, Section 4.3.1
ASTM D 2671
RW-3029/2, Section 4.3.2
ASTM D 2671
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.3
RW-3029/2, Section 4.3.4
RW-3029/2, Section 4.3.5
Percent
Percent
Percent
V/mil (kV/mm)
Ohm-cm
50 minimum
1.0 maximum
0.1 maximum
ASTM D 2671
ASTM E 595
800 minimum (31,500)
600 minimum (2,600)
1 X 10
13
minimum
Noncorrosive
No pitting or blackening of
copper
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.6.1
ASTM D 2671, Proc. A
RW-3029/2, Section 4.3.6.2
ASTM D 2671, Proc. B
RW-3029/2, Section 4.3.2
ASTM D 2671, Proc. A
ISO 846, Method B
Percent
Seconds
psi (Mpa)
Percent
Volts/mil (volts/mm)
Percent
100 minimum
15 maximum
5000 minimum (34.5)
150 minimum
800 minimum (31,500)
600 minimum (23,600)
0.5 maximum
RW-3029/2, Section 4.3.2
ASTM D 2671
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.7
Volts/mil (Volts/mm)
psi (MPa)
700 minimum (27,600)
500 minimum (19,700)
5000 minimum (34.5)
ASTM D 2671
RW-3029/2, Section 4.3.2
ASTM D 2671
While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty
or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly
disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions
in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
In photovoltaic applications, due to the characteristics of photovoltaic panels themselves, there is a large leakage current.
Leakage current is particularly severe in string inverters, so H6 and its ...
I want to ask, I use F2812 to expand a large capacity FLASH, I use Samsung K9K1G series, how should I connect it,because the data port of FLASH chip is parallel port, but the address is generated in s...
You don't need to define header files yourself. This is generally the case, but the strange thing is that we often don't know those definitions. Let's take a look together! Now I will summarize all th...
[color=blue]1) After logging into the blog, enter the personal space and click "Share" at the top, as shown in the figure below[/color] [color=#0000ff][/color][color=#0000ff][/color] [color=#0000ff]2)...
[size=12pt][b] 1 Start a hardware development project[/b][/size] The original driving force may come from many aspects, such as market needs, needs based on the entire system architecture, functional ...
1. I think that those of you who have done PWM generally use it to implement DA? Are there any other uses? I would like to know more.2. I want to use PWM to implement 8-bit DA. I roughly calculated th...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
Battery life is critical for portable applications. For applications such as smoke detectors, security devices, and thermostats, factory-installed batteries need to last for more than 10 years. The...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
The data collector of the automatic weather station is generally designed based on a single-chip microcomputer or a PC/104 bus controller. It has the characteristics of good compatibility with PC, low...[Details]
12v Lead Acid batteries used in trucks, cars, RVs and uninterruptible power supplies are usually rated at 12V. This circuit monitors the battery, the charge and discharge curves, gives the cu...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
introduction
Incandescent bulbs can emit a variety of light, but in specific applications, only green, red, and yellow light are usually needed - such as traffic lights. If an incand...[Details]
0 Introduction
Ultrasonic waves
are mechanical waves with a frequency of more than 20KHz, and the propagation speed in the air is about 340 m/s (at 20°C). Ultrasonic waves can be gene...[Details]
The above is to use MB1404 as a stereo composite signal transmitter. You can use the internal high-frequency amplifier and oscillator or not! According to my experience, I still recommend beginners...[Details]
introduction
Steam turbines are driven by high-temperature and high-pressure steam generated by boilers to run at high speed. They are key power equipment in thermal power plants. The emergenc...[Details]
As the global LED market demand continues to increase, my country's LED industry will face huge opportunities in the future. However, the core LED technology and patents are basically monopolized b...[Details]
Cars equipped with xenon headlights are already common on the road. Whether they are standard equipment on high-end cars or embellishments on modified cars, xenon lamps are gradually becoming a sym...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
