for molded-in solder type contacts. Contrasting let-
ter or number designations are used on insert faces.
A fluorinated silicone interfacial seal wafer is fea-
tured on the mating face of “crimp type pin” inserts.
This assures complete electrical isolation of pins
when connector halves are mated. In addition, a
main joint gasket is installed in the receptacle for
moisture sealing between connector halves. Both
features are also available for hermetic receptacles.
Wall
Mounting
Receptacle
Wall
Mounting
Receptacle
Box
Mounting
Receptacle
Line
Receptacle
Straight
Plug
Jam
Nut
Receptacle
Contacts
Maximum design flexibility is built into the JT/LJT
Series, with a minimum of 2 to a maximum of 128
circuits per connector in a wide variety of contact
arrangements. Contacts are available in sizes 8,
10, 12, 16, 20, 22, 22D and 22M with standard 50
micro inch minimum gold plating (100 micro inches
optional). All socket contacts are probe proof. Crimp
type rear removable contacts are featured in JT-R
and LJT-R connectors. Solder termination contacts
are also available, as well as PCB, wire wrap, ther-
mocouple, fiber optic, coaxial, triaxial and twinax
contact options.
Jam Nut
Receptacle
Straight
Plug
90° Plug
Solder
Mounting
Receptacle
Optional Features
High temperature capability of 392°F is available
only in JTS or LJTS crimp type connectors. High
temperature versions feature gold plated contacts,
high temperature shell plating, stainless steel cou-
pling nut spring, and epoxy inserts/fluorinated sili-
cone grommet combination. Standard temperature
capability for both solder and crimp is 302°F.
The JTN or LJTN type connectors are available for
N
2
O
4
resistance provided they are mated, and un-
grommeted rear faces are suitably protected.
For complete listing and definition of connector
types, shell styles and service classes, see How to
Order, page 53. For information on Fail-Safe Lan-
yard Release style plugs see pages 38-41.
Lanyard
Release
Plug
Solder
Mounting
Receptacle
2
JT/LJT
specifications
CONTACT RATING
Test Current
Contact
Size
22M
Solder &
Crimp
3
Hermetic
2
Maximum
Millivolt Drop
Crimp*
45
Maximum
Millivolt Drop
Solder*
20
Hermetic*
60
Contact
Size
22M
22D
22D
5
22
20
16
12
3
5
7.5
13
23
73
3
5
10
17
73
55
49
42
33
85
20
20
20
20
NA
85
60
85
85
NA
22
20
16
12
10 (Power)
Crimp Well Data
Well
Nominal
Diameter
Well Depth
.028 ±.001
.0345 ±.0010
.0365 ±.0010
.047 ±.001
.067 ±.001
.100 ±.002
.137 ±.002
.141
.141
.141
.209
.209
.209
.355
+.004
–.000
+.004
.044
–.004
+.000
.078
–.004
.116 +.004
–.002
.036
NA
.094
.125
.141
.141
NA
Solder Well Data
Well
Nominal
Diameter
Well Depth
.029
+.004
–.000
* 10 (Power)
When tested using silver plated wire.
33
NA
SERVICE RATING**
Service
Rating
M
N
I
II
Suggested Operating Voltage
(Sea Level)
AC (RMS)
DC
400
300
600
900
500
450
850
1250
Test Voltage
(Sea Level)
1300 VRMS
1000 VRMS
1800 VRMS
2300 VRMS
Test Voltage
50,000 ft
550 VRMS
400 VRMS
600 VRMS
800 VRMS
Test Voltage
70,000 ft
350 VRMS
260 VRMS
400 VRMS
500 VRMS
Test Voltage
110,000 ft
200 VRMS
200 VRMS
200 VRMS
200 VRMS
** Please note that the establishment of electrical safety factors is left entirely in the designer’s hands, since he is in the best position to know what peak voltage,
switching
surges, transients, etc. can be expected in a particular circuit.
[color=black]Some concepts of logic level[/color] [color=black] To understand the content of logic level, we must first know the meaning of the following concepts: [/color] [color=black] 1: Input high...
For the circuit shown in the figure, find the current meter value. In addition, if the positive and negative directions of the power supply are reversed, what is the current value? [[i] This post was ...
I recently made a LM3S8962 to control TLC2543 to realize AD sampling of multiple external data. I found some routines and modified them, but there was no output result. The AD sampling value was alway...
I burned the wince kernel to the 2410 board yesterday, and it was successful. The touch screen also displayed the wince interface. But when I opened it today, I couldn't get in, and the touch screen w...
Static electricity is harmful to most electronic products, and RF modules are more sensitive to static electricity. So how should ESD immunity be considered and designed for RF module products? Regard...
In filter design, high-pass filter is a very important part. This article introduces the design process of 10KHZ high-pass filter. First, open the webench design interface [url=http://www.ti.com.cn/ls...
In the early 1990s, portable phones were all the rage. With the rapid development of electronic technology, today's mobile phones can not only send emails and text messages, but also take photos, ch...[Details]
1 Overview
Drugs are like a "double-edged sword". They can treat diseases but can also cause serious adverse consequences. The dual nature of drugs depends on whether they are used rationally....[Details]
In some applications, such as data loggers, it is desirable to have multiplexed analog outputs. When only a single output is active at a time, a voltage-output DAC">digital-to-analog converter (DAC) a...[Details]
Introduction
The market for wireless telemetry products is developing rapidly. Recently, the industry has also set off a revolution in wireless applications. Wireless telemetry technol...[Details]
1 Overview
The BP01 pressure sensor is specially designed for monitoring blood pressure and is mainly used in portable electronic sphygmomanometers. It uses a precision thick-film ceramic chip and...[Details]
This article discusses how to use an ultra-low-power RF transceiver chip from Zarlink Semiconductor for pacemakers, neurostimulators, drug pumps, and other such implantable medical devices t...[Details]
Maximize instrument utilization and reduce
test times
Increasing the throughput of automated test systems can improve efficiency. Using off-the-shelf tools (COTS) such as multicore proc...[Details]
Today's mobile phone production testing faces an increasingly complex environment, with challenges of multiple frequency bands and multiple standards, pressure on production test speed, and pressur...[Details]
Overview
Currently, many portable consumer electronic products, such as mobile phones, PDAs, MP3 players, and notebooks, are equipped with display screens. Although the type and size of the di...[Details]
The rapid growth of consumer video applications, from portable media players and cell phones to video game consoles, requires a multitude of different interfaces and adapters to enable users to tra...[Details]
Abstract:
Aiming at the performance requirements of the control system for micro-sized walking robots, a control system that can be used for multi-joint driving of walking robots is introduce...[Details]
Abstract
: This paper introduces the general structure of the driver under the currently popular open source embedded operating system μClinux, as well as the connection between the touch scr...[Details]
The difference between CCD and CMOS sensors Mr.OH! briefly introduced CCD and CMOS in the second lecture, but for most students, what they see is a combination of integrated chips! The detailed int...[Details]
Femtocell base stations are required to meet stringent requirements in terms of interference, compatibility testing between mobile devices and networks (such as ad hoc networks, handovers), and mee...[Details]
introduction
The latest embedded designs enable a multitude of complex new products and services across a wide range of industries and applications. Driven by shrinking cost constraints an...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
