The REF02 is a precision 5V voltage reference. The
drift is laser trimmed to 8.5ppm/°C max over the
extended industrial and military temperature range.
The REF02 provides a stable 5V output that can be
externally adjusted over a
±6%
range with minimal
effect on temperature stability. REF02 operates from a
single supply with an input range of 8V to 40V with a
very low current drain of 1mA, and excellent tempera-
ture stability due to an improved design. Excellent line
and load regulation, low noise, low power, and low
cost make the REF02 the best choice whenever a 5V
voltage reference is required. All popular package
options are available: plastic DIP, and SOIC. The
REF02 is an ideal choice for portable instrumentation,
temperature transducers, A/D and D/A converters, and
digital voltmeter.
APPLICATIONS
q
PRECISION REGULATORS
q
CONSTANT CURRENT SOURCE/SINK
q
DIGITAL VOLTMETERS
q
V/F CONVERTERS
q
A/D AND D/A CONVERTERS
q
PRECISION CALIBRATION STANDARD
q
TEST EQUIPMENT
2
V
IN
V
OUT
REF02
3
Temp
GND
4
Trim
5
R
POT
10kΩ
(Optional)
6
Output
+5V Reference with Trimmed Output
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
is defined as the absolute difference between the maximum output and the minimum output voltage over the specified temperature range expressed
as a percentage of 5V:
∆V
= V
MAX
– V
MIN
x 100
(2)
∆V
OT
specification applies trimmed to +5.000V or untrimmed. (3) TCV
O
is defined as
∆V
OT
divided by
O
5V
the temperature range. (4) Line and load regulation specifications include the effect of self heating. (5) Sample tested. (6) 10kΩ potentiometer connected between
V
OUT
and ground with wiper connected to Trim pin. See Figure on page 1. (7) Pin 3 is insensitive to capacitive loading. The temperature voltage will be modified by
7mV for each
µA
of loading.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
REF02
2
ABSOLUTE MAXIMUM RATINGS
Input Voltage ...................................................................................... +40V
Operating Temperature
G, P, U ........................................................................... –40°C to +85°C
Storage Temperature Range
G, P, U ........................................................................... –65°C to +125°
M .................................................................................... –65°C to +150°
Output Short Circuit Duration (to Ground or V
IN
) ....................... Indefinite
Junction Temperature ....................................................... –65°C to +150°
θ
JA
P ......................................................................................... 120°C/W
U ........................................................................................... 80°C/W
Lead Temperature (soldering, 60s) ............................................... +300°C
PIN CONFIGURATIONS
Top View
DIP/SOIC
NC
V
IN
Temp
GND
1
2
3
4
8
7
6
5
NC
NC
V
OUT
Trim
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PACKAGE INFORMATION
PRODUCT
REF02AU
REF02BU
REF02AP
REF02BP
PACKAGE
SOIC
SOIC
Plastic DIP
Plastic DIP
PACKAGE DRAWING
NUMBER
(1)
182
182
006
006
NOTE: (1) For detailed drawing and dimension table, please see end of data
京公网安备 11010802033920号
EEWORLD
