REVISION M
DO NOT
SCALE FROM
THIS PRINT
TLSD-XX-X-XX.XX-01-X-XXX
No OF POSITIONS
-03, -04, -05, -07, -08,
-10, -12, 13, -15, -17,
-20, -22, -25
END ASSEMBLY
-S: SINGLE (SEE FIG. 2)
-D: DOUBLE (SEE FIG. 1)
ASSEMBLY LENGTH
(2.00 [50.8] MIN)
XX.XX .125
[XX.XX x 25.4 3.175]
C2
LEAD STYLE
PLATING SPECIFICATION
-L: LIGHT SELECTIVE GOLD
-F: FLASH SELECTIVE GOLD
NO. OF POS. X .07874 +.205
[NO. OF POS. X 2.00 + 5.21]
REF
OPTIONS
-N: NOTCH
-BXX: BREAK OUT
-PXX: POLARIZE MATING
-RW: REVERSE WIRING
-RN1: REVERSE NOTCH
END 1
-RN2: REVERSE NOTCH
END 2
-SR: STRAIN RELIEF
-DXX: DAISY CHAINED
-R: REVERSED CONNECTOR
-M: MIDDLE REVERSED CONNECTOR
(ONLY AVAILABLE WITH -DXX)
-O: OUTSIDE REVERSED CONNECTOR
(ONLY AVAILABLE WITH -DXX)
END 1
END 2
TLMC-XX-D
.010 0.25 MAX.
CABLE OVERHANG
(TYP)
TCB-50
BLACK WIRE TO SIDE OF
FIRST POSITION INDICATOR
C1
.345±.010 8.76±0.25
SUB-TLSD-XX-01-X-X-XXX
NOTCH DENOTES FIRST POSITION
TLSD-XX-D-XX.XX-01-X
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. ALL ASSEMBLIES TO BE 100 % ELECTRONICALLY TESTED
FOR SHORTS AND OPENS.
3. ALL ASSEMBLIES TO BE 100 % HI-POT TESTED AT 800V.
4. FOR CONNECTOR ASSEMBLY SEE DRAWING
SUB-TLSD-XX-XX-X-X-CCC.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
FIG 1
XX.XX .125
[XX.XX x 25.4 3.175]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.XX: .01 [0.3]
2
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
TLSD-XX-S-XX.XX-01-X
(SAME AS FIG 1 EXCEPT AS SHOWN)
F:\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
FIG 2
INSULATOR: CELANEX 3300, COLOR: BLACK
CONTACT: PHOS BRONZE
WIRE: 28 AWG, 7/36 STRANDED, TINNED
COPPER WITH PVC INSULATOR
MAX FLASH ALLOWED: .002[0.05]
MAX GATE VESTIGE: .002[0.05]
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
BY:
LENNY K
TLSD-XX-X-XX.XX-01-X-XXX
2/16/07
SHEET
1
OF
3
REVISION M
5.000 MAX
2.000 MIN
.0750 1.91 REF
.040 1.02
REF
-BXX: BREAK OUT OPTION
"XX" = NUMBER OF CONDUCTORS BROKEN
OUT FROM THE FIRST POSITION
TLSD-XX-D-XX.XX-01-X-N-B04 SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
FIG 4
NOTCH
-N: NOTCH OPTION
TLSD-XX-D-XX.XX-01-X-N SHOWN
(SAME AS FIG. 1 EXCEPT AS SHOWN)
NOTCH
FIG. 3
NOTCH
-SR OPTION: STRAIN RELIEF OPTION
TLSD-04-D-XX-01-X-SR SHOWN
(SAME AS FIG 2 EXCEPT AS SHOWN)
FIG 9
07
05
03
01
08
06
04
02
TLCS-XX-D
.495±.010 12.57±0.254
-PXX: POLARIZE MATING OPTION
"XX" = POSITION POLARIZED
THE SAME POSITION WILL BE POLARIZED ON BOTH ENDS.
(USE PK-07-N)
TLSD-XX-D-XX.XX-01-X-P03 SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
FIG 5
(REVERSE POLARIZATION NOTCH)
-RN1: REVERSE NOTCH OPTION ON END 1 ONLY
NOT AVAILABLE WITH -R OPTION
TLSD-04-D-XX-01-X-RN1 SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
FIG 8
.345±.010 8.76±0.254
XX.XX [XX.XX x 25.4] + .65[16.5]±.125[3.18]
IN-PROCESS
(-SR ONLY)
PROPRIETARY NOTE
BLACK WIRE TO OPPOSITE
SIDE OF FIRST POS. INDICATOR
-RW: REVERSE WIRING OPTION
TLSD-XX-D-XX.XX-01-X-RW SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
FIG 6
(REVERSE POLARIZATION NOTCH)
-RN2: REVERSE NOTCH OPTION ON END 2 ONLY
NOT AVAILABLE WITH -R OPTION
TLSD-04-D-XX-01-X-RN2 SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
F:\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
FIG 7
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
TLSD-XX-X-XX.XX-01-X-XXX
2/16/07
SHEET
2
OF
3
BY:
LENNY K
REVISION M
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
MIDDLE SOCKET REVERSED
WHEN DAISY CHAINED
END 1
-DXX: DAISY CHAINED CONNECTOR OPTION
"XX" = DISTANCE FROM END 2
TLSD-04-D-XX-01-X-DXX SHOWN
NOT AVAILABLE WITH -SR OPTION
(SAME AS FIG 1 EXCEPT AS SHOWN)
FIG 10
END 2
-M: MIDDLE REVERSED CONNECTOR OPTION
TLSD-04-D-XX-01-X-DXX-M SHOWN
NOT AVAILABLE WITH -SR OPTION
ONLY AVAILABLE WITH -DXX
(SAME AS FIG 1 EXCEPT AS SHOWN)
FIG 12
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
OUTSIDE SOCKET REVERSED
WHEN DAISY CHAINED
-O: OUTSIDE REVERSED OPTION
TLSD-04-D-XX-01-X-DXX-O SHOWN
NOT AVAILABLE WITH -SR OPTION
ONLY AVAILABLE WITH -DXX
(SAME AS FIG 1 EXCEPT AS SHOWN)
BOTH SOCKETS REVERSED
WHEN DAISY CHAINED
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 13
-R: REVERSED CONNECTOR OPTION
TLSD-04-D-XX-01-X-DXX-R SHOWN
NOT AVAILABLE WITH -SR OPTION
(SAME AS FIG 1 EXCEPT AS SHOWN)
FIG 11
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
DESCRIPTION:
DWG. NO.
TLSD-XX-X-XX.XX-01-X-XXX
BY:
LENNY K
F:\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
2/16/07
SHEET
3
OF
3
京公网安备 11010802033920号
EEWORLD
