TA22
www.vishay.com
Vishay Sfernice
Single Value Wirebondable Thin Film Chip Resistors
FEATURES
• Small size 20 mil square
• Resistance range 10
to 1 M
• Resistor material: self-passivating
Tantalum Nitride
• Silicon substrate for good power dissipation
Actual Size
• Wirebondable
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
DESIGN SUPPORT TOOLS
Models
Available
click logo to get started
Thin film resistors are often an excellent solution for analog design problems where space is limited and high packing density
is required. Due to their Tantalum Nitride resistive layer these resistors are stable 0.07 % (2000 h, rated power at +70 °C) and
moisture resistant.
SCHEMATIC AND PATTERN
R
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
TA22
Note
(1)
On request
SIZE
0202
RESISTANCE
RANGE
10 to 1M
RATED POWER
P
70 °C
W
0.05
LIMITING
ELEMENT
VOLTAGE
V
100
TOLERANCE
±%
0.5, 1.0, 2.0
TEMPERATURE
COEFFICIENT
± ppm/°C
50
(1)
, 100
CLIMATIC SPECIFICATIONS
Operating temperature range
Storage temperature range
-55 °C to +155 °C
-55 °C to +155 °C
MECHANICAL SPECIFICATIONS
Resistive element
Passivation
Substrate material
Bonding pads
Tantalum Nitride
Tantalum Pentoxide (Autopassivation)
Standard Silicon
Aluminum
DIMENSIONS
in millimeters (inches)
0.58 ± 0.05
(23 ± 2)
0.43
(17.2)
0.58 ± 0.05
(23 ± 2)
0.47
(18.8)
0.58 ± 0.05 0.43
(23 ± 2) (17.2)
Type A (Current)
0.58 ± 0.05 0.47
(23 ± 2) (18.8)
0.08 min.
(3.2 min.)
Type B (New)
0.125 min.
(5 min.)
0.08 min.
(3.2 min.)
0.10 min.
(4 min.)
Note
• Customer can get one or the other part, but positions of pads are similar
Revision: 25-Jan-18
Document Number: 60062
1
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
TA22
www.vishay.com
Vishay Sfernice
DIMENSIONS
in millimeters (inches)
0.4 max.
(15.75 max.)
TECHNICAL SPECIFICATIONS
TEST
MATERIAL
Power dissipation
Stability
Voltage coefficient
Noise
Thermal EMF
Shelf life stability
SPECIFICATIONS
TANTALUM NITRIDE
100 mW at 25 °C, 50 mW at +70 °C, 25 mW at +125 °C
± 0.07 % typical, ± 0.1 maximum
< 0.1 ppm/V
< -35 dB typical
< 0.01 μV/°C
100 ppm
1 year at +25 °C
MIL-STD-202 method 308
2000 h at +70 °C at Pn
CONDITIONS
DERATING
Rated Power in %
100
80
60
40
20
0
0
25
50
75
100
125
150
175
Ambient Temperature in °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TA22-100KD0016 (preferred part number format)
T
A
2
2
-
1
0
0
K
D
0
0
1
6
GLOBAL MODEL
VALUE
Decimal
R, K or M
TOLERANCE
D
= ± 0.5 %
F
= ± 1.0 %
G
= ± 2.0 %
OPTION
Leave blank
if no option
Historical Part Number example: TA22 10K 0.5 % R0016 (will continue to be accepted)
TA22
HISTORICAL MODEL
10K
VALUE
0.5 %
TOLERANCE
R0016
OPTION
Revision: 25-Jan-18
Document Number: 60062
2
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
