• Glass sealed package assures high reliability and high temperature operation
• Tight tolerance and stability available
• Suitable for RoHS compliant re ow
• Low cost glass sealed crystal solution
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
Moisture Sensitivity Level (MSL) –This product is Hermetically Sealed and not Moisture Sensitive -MSL = N/A: Not Applicable
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
• Microprocessor crystals
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
8.000
8.000
Operation mode
40.001
40.001
Operating Temperature
Storage Temperature
Frequency Tolerance@ +25°C
Frequency Stability over the Operating
Temperatu ( ref. to +25°C)
re
Equivalent series resistance
-10
-40
-50
-50
-----
-----
-----
-----
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging @ 25°C±3°C
Insulation Resistance
-----
-----
-----
-----
500
Typical
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
18
10
-----
-----
Maximum
100.000
40.000
100.000
60.000
+60
+85
+50
+50
ºC
ºC
ppm
ppm
MHz
Units
Notes
Fundamental
Fundamental AT-
cut (Standard)
3
rd
OT AT -cut
(Standard)
Fundamental AT-
cut (See options)
See options
See options
See options
8.000 – 10.000MHz
(Fundamental)
10.001 – 15.999MHz
(Fundamental)
16.000 – 60.000MHz
(Fundamental)
40.000 – 100.000MHz
(3
rd
OT)
100
60
50
70
7
-----
100
±5
-----
pF
pF
µW
ppm
MΩ
Ω
-----
See options
First year
@ 100Vdc
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
ABM 2-
Frequency in MHz
e.g. 8.000MHz
14.31818MHz
26.000MHz
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
MHz -
-
-
-
-
Packaging
Blank: Bulk
T : 1k reel
T2 : 250pcs/reel
Mode
F: Fund AT for >40MHz
Load Capacitance (pF)
Please specify CL in pF
(8 to 33pF) or S for series
Please contact ABRACON for
other values
Custom ESR if other
than standard
R
: Specify a value in Ω
(e.g.: R4 0)
Operating Temp.
(See Table 1 for details)
E : 0°C ~ + 70°C
B : -20°C ~ +70°C
C: -30°C ~ + 70°C
N: -30°C ~ + 85°C
D: -40°C ~ +85°C
Freq. Tolerance
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
(See Table 1 for details)
U: ±10 ppm
G: ±15 ppm
X : ±20 ppm
W: ±25 ppm
Y : ±30 ppm
H: ±35 ppm
A : ±80 ppm
Q: ±100 ppm
V : ±120 ppm
P: ±150 ppm
Note: See Table 1 for the availability of Operating Temp. and Freq. Stability combination
Table 1 Available Combinations of Operating Temp. and Freq. Stability
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
U:±10ppm
√
G:±15ppm
√
√
√
X:±20ppm
√
√
√
W:±25ppm
√
√
√
√
Y:±30ppm
√
√
√
√
√
√*
H:±35ppm
√
√
√
√
√
√*
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
Std:±50ppm
√
√
√
√
√
√*
A:±80ppm
√
√
√
√
√
√
Q:±100ppm
√
√
√
√
√
√
V:±120ppm
√
√
√
√
√
√
P:±150ppm
√
√
√
√
√
√
Note: *: Availability depends on frequency.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
LLC
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OUTLINE DIMENSION:
0.062±.019
(1.6 ±0.20)
Note: Due to the availability of raw materials, the chamfer may not appear on the both pads. Be advised that this does
not affect the electrical characteristics of the crystal in any way.
Dimensions: inches (mm)
REFLOW PROFILE:
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
TAPE & REEL:
T: 1000pcs/reel
T2: 250pcs/reel
Dimensions: mm
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
When choosing the MCU model at the ISP, do you have to choose the same one as the one on the experimental board? Can you use other models in the same series instead? I think someone has tried it:lovel...
Where is the MMU initialization done in the Linux kernel? I searched for it for a long time but couldn't find it!!! Also, is the mapping between virtual address and physical address manually specified...
I hope to communicate with more people with lofty ideals. First, I will provide a copy of the Verilog courseware of Tsinghua Microelectronics Institute....
Refer to Qingke's OV2640 program, modify it to display on LCD, and after displaying the pictures in TF card, start to work on OV2640, but still not done. The current problem is: can't enter DCMI, DMA ...
The DC brushed motor is 12V10A. It uses a single-chip microcomputer to control the MOS tube to start, but the motor often fails to start. I don’t know where the problem lies. The power supply is 12V29...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
In early 2002, I started to write a working program for an IC card prepaid electricity meter. The meter used Philips' 8-bit 51-expanded single-chip microcomputer
87LPC764
, and wa...[Details]
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
1. Principle of displacement angle sensor
The angle sensor is used to detect angles. It has a hole in its body that fits the LEGO axle. When connected to the RCX, the angle sensor counts once ...[Details]
LED lamps and bulbs are now rapidly replacing incandescent, halogen and CFL (compact fluorescent lamp) light sources in many general lighting applications. Flyback DC/DC converters are the power su...[Details]
Corelink Semiconductor has launched the CL1100-based 5-7W E27 LED lighting driver system solution DB2. This driver module meets the requirements of small size (L×W×H=5.1cm×2.1cm×1.8cm), low standby...[Details]
Since AC mains power may experience power outages, voltage sags and surges, continuous undervoltage and overvoltage, and frequency fluctuations during supply, these factors will affect the continuous ...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
At present, how various communication technologies will evolve after 3G is a focus of great concern in the industry. Especially for TD-SCDMA, whether it can achieve smooth evolution to the next gen...[Details]
Traditional
virtual instruments
consist of a data acquisition
board
based on PCI bus and
corresponding software. However, with
the rapid development of
computer
network techno...[Details]
Analysis of the three core aspects of digital TV transmission standards
According to the differences in regionality, transmission method and modulation method, the transmission method needs to...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
